T1042NSE7PQPB - QorIQ 4x e5500 1.4GHz MPU | NXP
N.º de pieza: T1042NSE7PQPB ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $285 | $285,00 |
| 10 | $268.5 | $2.685,00 |
| 100 | $245 | $24.500,00 |
| 250 | $225 | $56.250,00 |
| 500 | $210 | $105.000,00 |
T1042NSE7PQPB Descripción general
A communications processor is a specialized system-on-chip that combines general-purpose CPU cores with hardware offload engines for packet processing, security, and high-speed I/O. Within the broader taxonomy, the T1042 sits at the top of the tree: communications processor -> microprocessor (MPU) -> integrated circuit -> semiconductor. The QorIQ T1 family is a scalable, pin-compatible platform that allows migration down to the dual-core T1022 and up to higher-performance devices such as the T2081, simplifying platform design across product tiers.
Key specifications of the T1042NSE7PQPB include four e5500 cores at 1.4 GHz, 32 KB I-cache and 32 KB D-cache per core with 256 KB shared L2 per cluster, integrated SEC cryptography engine, DDR3L/DDR4 memory controller with ECC support, three PCI Express Gen 2 controllers, two SATA 2.0 ports, two USB 2.0 controllers with PHY, two Gigabit Ethernet controllers, and an integrated security engine for IPsec, SSL/TLS, and bulk encryption. The device supports hardware virtualization and implements the DPAA for hardware-assisted queue and buffer management.
The architecture combines out-of-order Power Architecture execution with hardware-accelerated data path processing. The e5500 cores implement hardware virtualization through logical partition support and extended interrupt prioritization. The DPAA provides a standardized infrastructure for parallel packet processing, including frame managers, queue managers, and buffer managers that offload packet handling from the cores. Hardware security acceleration includes AES, 3DES, Kasumi, SHA-1/SHA-256, public-key accelerator, and a true random number generator.
Typical applications include industrial and networked printers, multi-function peripherals, industrial control and factory automation gateways, ruggedized networking equipment, secure routers and VPN concentrators, and small-form-factor industrial servers. The absence of an integrated Ethernet switch reduces BOM cost for applications that already provide external switching, while the integrated PHYs and SEC engine minimize external component count.
When designing with this device, ensure the FC-PBGA-780 substrate has adequate microvia stack-up to route the DDR3L/DR4 byte lanes with matched impedance. The thermal design must account for the 1.4 GHz quad-core power envelope; a heatsink or thermal interface material is recommended at sustained workloads above 70 percent utilization across all four cores.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
Alternativas directas para T1042NSE7PQPB — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
T1042NXE7PQB
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
T1022NSE7MQB
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
T1022NXE7MQB
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
T2081NSE6TTB
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
T1042NSE7PQPB Valores máximos y características eléctricas
| Manufacturer | NXP Semiconductors |
| Series | QorIQ T1 |
| Core Architecture | Power Architecture e5500 (64-bit) |
| Number of Cores | 4 |
| Core Frequency | 1400 MHz |
| L1 Cache (per core) | 32 KB I-cache + 32 KB D-cache |
| L2 Cache (per cluster) | 256 KB (shared) |
| Memory Controller | DDR3L / DDR4 with ECC |
| Hardware Cryptography | Yes (SEC engine) |
| Data Path Acceleration | DPAA (Data Path Acceleration Architecture) |
| Ethernet Switch | Not integrated (No Switch) |
| PCI Express | 3x PCIe Gen 2 controllers |
| SATA | 2x SATA 2.0 |
| USB | 2x USB 2.0 with PHY |
| Ethernet | 2x Gigabit Ethernet controllers |
| Temperatura de funcionamiento | 0C to 105C |
| Target Market | Printer / Industrial |
| Encapsulado | 780-FCPBGA (23x23 mm) |
| Tipo de montaje | Surface Mount |
| Estado RoHS | Compliant |
Guía de configuración de pines de T1042NSE7PQPB 780-fcpbga (23x23 mm)
Configuración de pines para T1042NSE7PQPB (encapsulado 780-fcpbga (23x23 mm)). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para T1042NSE7PQPB.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
T1042NSE7PQPB es adecuado para 6 aplicacións: Industrial Networked Printers and MFPs, Industrial Gateway and Protocol Converter, Secure VPN Concentrator and Edge Router, Ruggedized Network Appliance, Multi-Function Industrial Controller, Embedded Industrial Server.
Industrial Networked Printers and MFPs
The T1042NSE7PQPB's four e5500 cores at 1.4 GHz and integrated SEC engine make it a strong fit for high-end networked printer controllers. The SEC engine accelerates IPsec and TLS for secure print job transmission across enterprise boundaries. The 2 SATA ports drive local storage for spooling and audit logs, while the 3 PCIe Gen 2 controllers connect to printer ASICs, scanner modules, and 10Gb uplinks via external PHYs. DDR3L/DDR4 with ECC ensures reliable operation across long print runs.
Recomendado
Industrial Gateway and Protocol Converter
The quad-core e5500 architecture plus DPAA offload engine lets the T1042NSE7PQPB handle multiple industrial protocols (Profinet, EtherNet/IP, Modbus TCP, OPC UA) on a single device. The 2 Gigabit Ethernet MACs connect directly to industrial PHY devices without external switches. The 0-105C operating range covers factory-floor deployment, while ECC memory protects against transient bit errors caused by industrial EMI environments.
Recomendado
Secure VPN Concentrator and Edge Router
The integrated SEC engine performs IPsec AES-256/SHA-256 at line rate, offloading the cores for control-plane routing. DPAA accelerates packet classification and QoS scheduling across multiple queues. The T1042NSE7PQPB's 4 cores handle BGP/OSPF/IS-IS routing tables while the SEC engine encrypts tunnels. The 3 PCIe Gen 2 ports support multi-port crypto accelerator cards for higher aggregate VPN throughput.
Recomendado
Ruggedized Network Appliance
The T1042NSE7PQPB's 0-105C operating temperature range and industrial qualification make it suitable for ruggedized military and industrial networking equipment. The e5500 cores support hardware virtualization for running multiple security functions (firewall, IDS, VPN) on a single device. DDR3L/DDR4 with ECC combined with the SEC engine provides FIPS-compliant cryptographic operations required by defense and critical infrastructure deployments.
Recomendado
Multi-Function Industrial Controller
The four e5500 cores at 1.4 GHz run real-time control loops, HMI logic, and fieldbus communications concurrently with predictable interrupt latency. PCIe connects to FPGA-based I/O modules for deterministic high-speed sampling, while SATA supports local logging of process data. The SEC engine authenticates firmware updates for IEC 62443-compliant deployments in critical infrastructure.
Recomendado
Embedded Industrial Server
The T1042NSE7PQPB's quad-core compute plus 16 GB+ DDR4 memory capacity supports embedded Linux server applications such as SCADA concentrators, edge analytics nodes, and protocol brokers. The integrated Gigabit Ethernet and USB 2.0 controllers minimize external component count, while the SEC engine secures data at rest and in transit. Industrial temperature operation enables fanless chassis deployment in factory cabinets.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para T1042NSE7PQPB — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | T1042NXE7PQB | T1022NSE7MQB | T1022NXE7MQB | T2081NSE6TTB | |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | |
| Package | 780-FCPBGA (23x23) | 780-FCPBGA (23x23) - same | 780-FCPBGA (23x23) - same | 780-FCPBGA (23x23) - same | 780-FCPBGA (23x23) - same | |
| Number of Cores | 4 x e5500 | 4 x e5500 | 2 x e5500 | 2 x e5500 | 4 x e5500 | |
| Core Frequency | 1400 MHz | 1400 MHz | 1400 MHz | 1400 MHz | 1800 MHz | |
| Memory Controller | DDR3L / DDR4 with ECC | DDR3L / DDR4 with ECC | DDR3L / DDR4 with ECC | DDR3L / DDR4 with ECC | DDR3L / DDR4 with ECC | |
| Hardware Cryptography | Yes (SEC engine) | Yes (SEC engine) | Yes (SEC engine) | Yes (SEC engine) | Yes (SEC engine) | |
| Integrated Ethernet Switch | No | No | No | No | No | |
| PCI Express | 3 x PCIe Gen 2 | 3 x PCIe Gen 2 | 3 x PCIe Gen 2 | 3 x PCIe Gen 2 | 4 x PCIe Gen 3 | 3 x PCIe Gen 2 |
| Operating Temperature | 0C to 105C | Extended temperature grade | 0C to 105C | Extended temperature grade | 0C to 105C |
Diferenciadores clave
- Pin-compatible scalability within QorIQ T1 family (frente a T1022NSE7MQB (2-core))
- Integrated SEC hardware cryptography (frente a Discrete security coprocessor designs)
- DPAA hardware offload for packet processing (frente a Software-only packet processing)
Notas de diseño
Estimated: at 1.4 GHz across four e5500 cores with full DPAA activity, sustained power consumption typically ranges 8-14 W depending on workload. The FC-PBGA-780 substrate has limited top-side cooling; deploy a heatsink with thermal interface material for industrial enclosures without forced airflow. At 25C ambient, junction temperature rise at 12 W with a 1.5 C/W heatsink is approximately 18C, leaving margin to the 105C operating limit.
The 780-FCPBGA package requires a high-density PCB stack-up with microvia-in-pad technology to route the memory byte lanes. Use matched-length serpentine routing for DDR3L/DDR4 address/command/control signals within 25 mil tolerance. Provide at least 4 PCB layers dedicated to ground planes beneath the BGA to control return-path impedance for the high-speed SERDES lanes.
The T1042NSE7PQPB requires multiple voltage rails (core VDD, DDR PHY VDD, SERDES VDD, I/O VDD) with strict sequencing requirements per NXP hardware specifications. Use a multi-rail PMIC such as the VRM12D2 or a discrete solution with proper power-on-reset timing. Decoupling requires dozens of 0.1 uF and 10 uF capacitors placed within 5 mm of the BGA balls to suppress switching noise.
SERDES lanes for SGMII/QSGMII and PCIe Gen 2 require characteristic impedance of 85 ohm differential with controlled loss budget. Keep SERDES traces at least 3W away from other high-speed lines and use ground-fill vias to maintain return-path continuity. Reference clock jitter must be under 100 ppm for the integrated PHYs to meet USB 2.0 and Gigabit Ethernet compliance.
Información de cumplimiento
RoHS and lead-free per NXP product page. AEC-Q100 not applicable for industrial communications processors; industrial temperature grade is 0-105C. Halogen-free status not explicitly stated in provided data.