Texas Instruments

TMS320C32PCM50 - 50 MHz Floating-Point DSP | Texas Instruments

N.º de pieza: TMS320C32PCM50 ✗ Fin de vida
144-QFP Package 50 MHz Speed
MOQ: 1 |

TMS320C32PCM50 Descripción general

The Texas Instruments TMS320C32PCM50 is a 50 MHz high-performance floating-point digital signal processor in a 144-QFP package measuring 28 x 28 mm. It provides a 33 ns instruction cycle and executes 330 million operations per second, 60 million floating-point operations per second, and 30 million instructions per second. The processor is designed for demanding real-time signal-processing workloads where floating-point arithmetic, deterministic instruction timing, and external memory and peripheral interfaces are essential.

A digital signal processor, or DSP, is a specialized microprocessor architecture optimized for filtering, Fourier analysis, modulation, waveform generation, and other mathematically intensive operations. Unlike a general-purpose processor, the TMS320C32 architecture provides a floating-point computational environment and predictable execution timing. It belongs to the DSP, real-time signal-processing IC, embedded processor, and semiconductor hierarchies used in industrial, communications, audio, and control systems.

The principal performance characteristics include a 50 MHz operating frequency, a 33 ns instruction cycle, and floating-point throughput of 60 MFLOPS. General operation reaches 330 MOPS, while instruction throughput is 30 MIPS. These figures distinguish the device from lower-speed signal processors and make it suitable for sampled-data systems that require continuous arithmetic processing without relying on a host processor for every calculation.

The TMS320C32 architecture is intended for real-time implementations requiring high-throughput arithmetic and direct access to external data. Its floating-point format simplifies many signal-processing calculations that would otherwise require fixed-point scaling and compensation. Application code can combine filtering, convolution, spectral processing, control calculations, and interface servicing within a dedicated processor architecture. The 144-pin package exposes the processor's external interface and bus resources while supporting integration into larger digital systems.

Typical applications include industrial motor control, communications-signal processing, audio and speech processing, vibration analysis, instrumentation, medical-signal processing, and embedded control. In each case, the 50 MHz clock and 60 MFLOPS floating-point throughput provide computational capacity for continuously updated samples, while the QFP package facilitates conventional PCB assembly and inspection.

System design should account for external memory timing, clock generation, reset sequencing, address decoding, and I/O interfacing. Because this is a 144-pin processor in a 28 x 28 mm QFP package, PCB routing and assembly require adequate escape routing around the fine-pitch leads. Validate processor initialization, bus timing, and application software on the final hardware before production release.

This page combines the core processor specifications, verified source links, package information, application guidance, and practical design considerations needed to evaluate the TMS320C32PCM50. The comparison material also distinguishes the 50 MHz device from related TMS320C32 family options while keeping package and pin-compatibility distinctions explicit.

Alternativas directas para TMS320C32PCM50 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con TMS320C32PCM50 (mismo factor de forma y huella) — difiere en Clock Frequency, Instruction Cycle Time, Package Type, Device Type, Package Body Size.

Texas Instruments
Instruction Cycle Time: 40 ns at 50 MHz
Package Type: 132-pin BQFP
Device Type: 32-bit floating-point digital signal processor (DSP)
Comparar con TMS320C32PCM50 →
Texas Instruments
Clock Frequency: 60 MHz
Package Body Size: 28 mm x 28 mm
Comparar con TMS320C32PCM50 →

TMS320C32PCM60

✅ Sustitución directa
Texas Instruments
📦 144-QFP (28 x 28 mm)
32-bit floating-point digital signal processor · 60 MHz · 30 MIPS · 60 MFLOPS · 330 MOPS · 33 ns · 40 ns · 32 bit

Consulte el precio

Ver hoja de datos →

TMS320C31PQA50

✅ Sustitución directa
Texas Instruments
📦 144-QFP (28 x 28 mm)
32-bit floating-point digital signal processor (DSP) · TMS320C3x · 50 MHz · 40 ns at 50 MHz · 25 MIPS at 50 MHz · 275 MOPS at 50 MHz · 50 MFLOPS at 50 MHz · 32 bit

Consulte el precio

Ver hoja de datos →

TMS320C32PCM50 Especificaciones

Device Type High-performance floating-point digital signal processor
Clock Frequency 50 MHz
Instruction Cycle Time 33 ns
General Operations 330 MOPS
Floating-Point Operations 60 MFLOPS
Instruction Throughput 30 MIPS
Arithmetic Type Floating-point
Package Type 144-QFP
Package Dimensions 28 x 28 mm
Terminal Count 144 terminals
Tipo de montaje Surface mount
Package Shape Square
Lead Form Gull wing

Guía de configuración de pines de TMS320C32PCM50 square

Configuración de pines para TMS320C32PCM50 (encapsulado square). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.

Diagrama de patillaje del encapsulado square para TMS320C32PCM50

No hay datos detallados de patillaje disponibles para TMS320C32PCM50.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

TMS320C32PCM50 es adecuado para 6 aplicacións: Industrial Motor Control, Communications Signal Processing, Audio and Speech Processing, Vibration and Condition Monitoring, Medical Signal Processing, Precision Instrumentation.

🏭

Industrial Motor Control

The TMS320C32PCM50 is appropriate for deterministic motor-control and condition-monitoring systems that repeatedly process sampled current, voltage, position, or vibration signals. Its 50 MHz clock, 33 ns instruction cycle, and 60 MFLOPS floating-point throughput allow filtering, transformations, and control calculations to execute on a dedicated processor rather than a general-purpose host. The processor can maintain predictable timing through its real-time instruction architecture. For a production design, verify memory timing, I/O synchronization, ADC interface timing, thermal performance, and industrial environmental requirements on the final board. The 144-QFP package also needs adequate assembly clearance and careful routing around its 144 fine-pitch gull-wing terminals.

🌐

Communications Signal Processing

The TMS320C32PCM50 can serve as a dedicated communications-signal processor when a design requires real-time filtering, modulation, spectral analysis, or rate conversion. Floating-point arithmetic simplifies many signal-chain calculations, while the 50 MHz clock and 60 MFLOPS throughput provide substantial parallel workload capacity for each sample period. Its 330 MOPS general-operation capability is useful when control logic and data movement must share the processor with the main arithmetic pipeline. Engineering teams should account for external memory bandwidth, deterministic bus timing, clock quality, and synchronization with the communications interface. Because the package exposes a large external interface, assign address and data buses according to the manufacturer pin table and verify signal integrity with realistic loading.

🎧

Audio and Speech Processing

The TMS320C32PCM50 is suited to embedded audio or speech systems where filtering, waveform transformation, and real-time sample processing must be performed predictably. The floating-point execution environment supports numerical algorithms without the scaling discipline required by many fixed-point implementations. At 50 MHz, the processor can execute 30 million instructions per second and 60 million floating-point operations per second, providing useful margin for a multi-stage signal chain. For an audio design, evaluate codec-interface timing, sample-clock synchronization, memory latency, and interrupt scheduling. Keep analog and digital return paths properly partitioned, and test the processor under sustained load because thermal and memory-bus effects can influence timing margins that are not visible in short functional tests.

📡

Vibration and Condition Monitoring

The TMS320C32PCM50 supports vibration-analysis, condition-monitoring, and predictive-maintenance systems that collect sensor data and perform filtering or spectral calculations in real time. Its 50 MHz operating frequency and floating-point throughput support iterative processing of sensor streams, while deterministic instruction timing helps simplify real-time scheduling. The implementation must still account for high-rate data movement through external memory, so throughput calculations should include transfer overhead rather than relying only on the 60 MFLOPS arithmetic figure. Use the manufacturer memory and bus-timing requirements when defining the board architecture. Validate sensor excitation, anti-alias filtering, timing margins, and fault recovery in the complete system, particularly when operating near environmental or component-performance limits.

💊

Medical Signal Processing

The TMS320C32PCM50 can be evaluated for medical instrumentation and biomedical signal-processing tasks that require deterministic filtering, feature extraction, or waveform analysis. Floating-point arithmetic is useful for algorithms handling dynamic-range and scaling requirements, while the 33 ns instruction cycle supports time-sensitive processing of sampled signals. A medical implementation must be evaluated at the complete system level, including acquisition accuracy, isolation, electromagnetic compatibility, safety controls, and software validation. The processor's legacy status requires careful lifecycle and change-control planning. Do not infer medical or automotive qualification from its digital signal-processing function; use formal qualification and compliance documentation for the finished product. Hardware verification should cover worst-case clocking, memory access, I/O activity, and thermal conditions.

🔧

Precision Instrumentation

The TMS320C32PCM50 is useful in measurement and instrumentation systems that combine high-rate sampling with real-time numerical processing. The 50 MHz clock and 60 MFLOPS floating-point throughput can support filtering, calibration, transform, and control functions while leaving computational capacity for user interface and measurement management tasks. Instrumentation designs should distinguish raw arithmetic capability from system-level measurement accuracy: converter interface timing, reference stability, memory latency, and analog front-end design remain independent error sources. Use the manufacturer interface specifications when assigning buses and validating synchronous transfers. The 144-QFP footprint also calls for a board outline that accommodates lead inspection, assembly access, and adequate routing channels, followed by timing and thermal testing in the intended instrument enclosure.

What are the key specifications of TMS320C32PCM50 that engineers should know?
The TMS320C32PCM50 is a 50 MHz floating-point digital signal processor packaged in a 144-QFP measuring 28 x 28 mm. According to the Texas Instruments datasheet, it has a 33 ns instruction cycle, supports 330 MOPS, 60 MFLOPS, and 30 MIPS, and combines floating-point processing with a dedicated real-time signal-processing architecture. These figures make it appropriate for filtering, spectral analysis, communications, audio, and industrial-control workloads requiring deterministic computation.
What is the operating frequency of TMS320C32PCM50?
The TMS320C32PCM50 operates at 50 MHz and has a 33 ns instruction cycle. According to the Texas Instruments datasheet, the processor can achieve 30 million instructions per second and 330 million general operations per second. Its floating-point execution capability is specified at 60 MFLOPS, making the device suitable for real-time arithmetic-intensive signal processing rather than general-purpose control workloads.
Where can I download the TMS320C32PCM50 datasheet PDF?
The TMS320C32PCM50 datasheet PDF is available from the Texas Instruments document link listed on this page. It is a 45-page digital signal processor document describing the device architecture, electrical characteristics, interfaces, and package information. For a new design, use the manufacturer document as the controlling reference for pin functions, supply requirements, timing, and operating limits.
Where can I find the TMS320C32PCM50 pinout?
The TMS320C32PCM50 pinout and pin descriptions are in the pin-connection section of the Texas Instruments datasheet PDF linked on this page. The component uses a 144-terminal square QFP package with gull-wing leads. Because the diagram library used on this page does not include a verified 144-QFP drawing, the individual pin table is not reproduced here; assign PCB nets directly from the manufacturer pin-description table.
What package does the TMS320C32PCM50 use?
The TMS320C32PCM50 uses a 144-QFP package measuring 28 x 28 mm. The package is square, uses gull-wing surface-mount leads, and has 144 terminals. Its relatively large lead count supports the processor's extensive external interfaces, but it also requires adequate PCB routing area and careful lead alignment during assembly.
What is TMS320C32PCM50 used for?
The TMS320C32PCM50 is used for real-time floating-point signal processing in applications such as industrial control, communications, audio processing, vibration analysis, instrumentation, and embedded signal-processing systems. Its 50 MHz clock, 33 ns instruction cycle, and 60 MFLOPS throughput allow sampled data to be processed continuously. The processor is most useful when a deterministic architecture is preferable to a general-purpose host processor.
What is the difference between TMS320C32PCM60 and TMS320C32PCM50?
TMS320C32PCM60 and TMS320C32PCM50 belong to the same TMS320C32 family, with the principal identified difference being clock speed: 60 MHz for TMS320C32PCM60 versus 50 MHz for TMS320C32PCM50. The 60 MHz model provides 20% more clock cycles for the same time interval. Confirm package, pinout, memory timing, and thermal requirements in the applicable Texas Instruments documents before treating one as a board-level substitute.
Is TMS320C31PQA50 a drop-in replacement for TMS320C32PCM50?
TMS320C31PQA50 should not be treated as an unconditional drop-in replacement for TMS320C32PCM50 without a complete hardware and software review. It belongs to the related TMS320C3x generation but is a different processor model, and its architecture, memory interface, and device-specific behaviors require verification. Although both parts are associated with 144-pin package options, pin assignment, bus timing, software initialization, and application compatibility must be confirmed before substitution.
What can replace TMS320C32PCM50?
The safest replacement path starts with the TMS320C32PCM60 because it is a faster member of the same processor family. A replacement should be accepted only after confirming package dimensions, pin assignment, clock requirements, memory timing, supply voltage, peripheral compatibility, initialization code, and thermal performance. No cross-manufacturer part is established as a guaranteed drop-in replacement by the available technical documentation.
When should I choose TMS320C32PCM50 over TMS320C32PCM60?
Choose TMS320C32PCM50 when a 50 MHz TMS320C32 implementation provides sufficient throughput and the PCB, clock, and thermal design were originally targeted around that speed. Choose TMS320C32PCM60 when additional processing margin is needed, but review maximum clock-dependent timing, memory requirements, and power behavior first. The faster device is not automatically preferable because it can alter timing margins and system power.
Is TMS320C32PCM50 suitable for industrial motor control?
The TMS320C32PCM50 can be suitable for industrial motor-control functions that require deterministic floating-point computation, including filtering, transforms, and control calculations. Its 50 MHz clock and 60 MFLOPS throughput provide dedicated processing capacity, but the complete system must also meet industrial environmental, isolation, safety, and EMC requirements. Validate the control loop and interface timing on production-representative hardware.
What are the power and thermal considerations for TMS320C32PCM50?
Power and thermal calculations require the exact operating voltage, clock, I/O loading, and package data from the Texas Instruments datasheet. The device can execute up to 330 MOPS at 50 MHz, so I/O and core activity should be evaluated rather than assuming every design produces identical dissipation. Estimate junction temperature from actual board thermal resistance and verify it in the final enclosure and ambient environment.
Is TMS320C32PCM50 RoHS and REACH compliant?
The RoHS and REACH status of TMS320C32PCM50 must be confirmed from the current Texas Instruments product or material-compliance record for the exact ordering code. The legacy device description confirms the part number and package, but it does not provide a current compliance declaration. Request the applicable material-compliance documentation before releasing a new regulated product or treating the device as compliant by inference.
Where can I buy TMS320C32PCM50 and check its lead time?
Use the Request a Quote form on this page to request TMS320C32PCM50 availability, current lead time, and minimum order quantity. The form is the appropriate channel for a transaction because legacy processor inventory and allocation can change quickly. State the required quantity, target date, and whether unopened factory packaging is required in the request.
What is the price of TMS320C32PCM50?
The current TMS320C32PCM50 price depends on quantity, condition, packaging, and market inventory, so it is not stated as a fixed figure on this page. Submit the Request a Quote form with your required quantity and delivery date for the current quotation. This is particularly important for a legacy DSP, where grade, date code, and factory-sealed packaging may affect the result.
Is TMS320C32PCM50 in stock?
Current TMS320C32PCM50 stock should be confirmed through the Request a Quote form on this page rather than inferred from a generic search result. A legacy 144-QFP DSP may have fragmented inventory or limited scheduled supply. Include your required quantity, acceptable delivery window, assembly requirements, and traceability needs when requesting availability.

Datos de referencia de ingeniería para TMS320C32PCM50 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose TMS320C32PCM50 for a 50 MHz TMS320C32 design when the established board, firmware, and external-interface timing already fit that processor. Its 330 MOPS general-operation capacity, 60 MFLOPS floating-point throughput, and 33 ns instruction cycle suit deterministic filtering, communications, audio, instrumentation, and control workloads. Choose TMS320C32PCM60 when the same TMS320C32 architecture is needed with 20% more clock cycles, but recheck memory timing, clock-dependent margins, power, and thermal behavior. TMS320C31PQA50 is a more cautious option for legacy software or inventory continuity, but the earlier TMS320C31 architecture requires separate hardware and software validation. For any substitution, verify the exact pin assignments, power requirements, bus timing, initialization sequence, and application performance rather than relying on package similarity alone.

Comparación con alternativas

Parámetro Este producto TMS320C32PCM60 TMS320C31PQA50
Brand Texas Instruments Texas Instruments Texas Instruments
Package 144-QFP (28 x 28 mm) 144-QFP (28 x 28 mm) 144-QFP (28 x 28 mm)
Product Type Floating-point digital signal processor Floating-point digital signal processor Digital signal processor
Clock Frequency 50 MHz 60 MHz 50 MHz
Processor Generation TMS320C32 TMS320C32 TMS320C31
Terminal Count 144 terminals 144 terminals 144 terminals

Diferenciadores clave

  • Same-family TMS320C32 software environment with a higher-clock option (frente a TMS320C32PCM60)
  • Dedicated 50 MHz floating-point processing resource (frente a TMS320C31PQA50)
  • High arithmetic throughput in a 144-QFP package (frente a TMS320C31PQA50)

Notas de diseño

Design the board around a 144-lead gull-wing QFP with a 28 x 28 mm body. Confirm the exact mechanical drawing, recommended footprint, solder-mask clearance, and courtyard against the Texas Instruments package information before releasing the PCB. Provide unobstructed access for visual inspection and assembly, and route the external address, data, and control buses away from sensitive analog sections. Because this is a legacy processor with a high pin count, cross-check every assigned net against the manufacturer pin-description table rather than relying on a similarly named family pinout.

Evaluate external-memory and I/O timing with the actual bus width, load, PCB geometry, and intended clock. The processor's 33 ns instruction cycle does not guarantee that every memory transaction can complete without additional timing analysis. Use controlled-impedance routing where required, minimize stubs, place termination appropriately, and perform signal-integrity simulation or measurement on representative boards. Firmware should not begin time-critical processing until the complete memory initialization and clock-start sequence has been verified.

Estimate dissipation from the operating voltage, 50 MHz clock activity, I/O loading, and the thermal design of the assembled board. The device can reach 330 MOPS, so sustained arithmetic and external-bus activity should be included in the thermal case. Estimate: dissipated power equals supply voltage multiplied by measured total device current, and junction temperature equals ambient temperature plus power dissipation multiplied by the effective board-or-enclosure thermal resistance. Confirm the estimate with temperature measurements in the final mechanical enclosure.

Do not treat the faster TMS320C32PCM60 or the related TMS320C31PQA50 as automatic replacements. Clock speed, memory timing, software initialization, peripheral behavior, and thermal margins can differ even when the package family is comparable. Before substitution, compare the exact Texas Instruments pin descriptions and timing tables, preserve required reset and clock sequencing, and execute the complete application test suite on the proposed alternate. Document any software, firmware, or passive-component changes in the revision history.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The product description identifies the package and processor technology but does not provide a current material-compliance declaration. Obtain the applicable Texas Instruments compliance record for the exact ordering code before use in regulated production.

Datos verificados el: 2026-11-10 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

TMS320C32PCM50 datasheet TMS320C32PCM50 pinout TMS320C32PCM50 datasheet pdf TMS320C32PCM50 specifications TMS320C32PCM50 equivalent TMS320C32PCM50 replacement TMS320C32PCM50 cross reference TMS320C32PCM50 vs TMS320C32PCM60 TMS320C32PCM50 footprint TMS320C32PCM50 price TMS320C32PCM50 stock Texas Instruments TMS320C32PCM50 TMS320C32PCM50 industrial motor control TMS320C32PCM50 floating point DSP TMS320C32PCM50 144 QFP

Componentes & términos relacionados

Texas Instruments TMS320C32PCM50 TMS320C32PCM60 TMS320C31PQA50 digital signal processor DSP floating-point processor real-time signal processing embedded processor semiconductor MOPS MFLOPS MIPS instruction cycle time 50 MHz clock external memory interface 144-QFP QFP package gull-wing lead surface mount industrial motor control communications signal processing audio processing vibration analysis medical signal processing precision instrumentation
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ