TMS320C6421ZDU4 - 400MHz C64x+ DSP | Texas Instruments
N.º de pieza: TMS320C6421ZDU4 ✓ ActivoTMS320C6421ZDU4 Descripción general
A digital signal processor is a programmable semiconductor optimized for arithmetic operations on continuously arriving data. In the broader hierarchy, a DSP belongs to microcontrollers and embedded processors, where it differs from a general-purpose processor through specialized execution units, memory interfaces, and real-time signal-processing capabilities. The TMS320C6421 architecture applies the C64x+ very-long-instruction-word design to fixed-point workloads, allowing multiple computational operations to be scheduled in parallel while maintaining predictable execution.
Key device characteristics include a maximum family clock rate of 600 MHz and a 400 MHz rating for the TMS320C6421ZDU4 ordering variant. The 376-ball BGA exposes a substantial set of external memory and communications connections, while the processor supports 8-bit EMIFA alongside 16-bit DDR2 and SDRAM interfaces. Separate core and I/O supply domains support 1.2 V core operation with 1.8 V or 3.3 V I/O operation, allowing selected external devices to use a different voltage domain from the DSP core.
The C64x+ execution engine uses very-long-instruction-word architecture, which supports high parallelism for filtering, correlation, transforms, control algorithms, and multimedia data processing. Its external-memory architecture is a defining part of any board design: the EMIFA path handles 8-bit asynchronous memory transactions, while the 16-bit DDR2 and SDRAM paths support higher-bandwidth synchronous-memory access. Interface timing, impedance-controlled routing, and power sequencing must therefore be evaluated together rather than treated as isolated GPIO concerns.
Typical applications include industrial motor and motion control, communications infrastructure, video and image acceleration, audio processing, test equipment, and embedded control systems. The 400 MHz processor rate makes the device suitable for algorithms that combine intensive fixed-point arithmetic with external-memory traffic. Systems requiring substantially greater parallelism may favor a device with more accelerator-specific resources, while simpler control loops can use a lower-complexity microcontroller.
PCB implementation requires careful treatment of the 376-ball BGA, including a controlled escape-routing strategy, adequate power and ground distribution, and via-in-pad or via-beyond-pad design according to assembly capability. Memory interfaces also require length matching, continuous reference planes, and impedance control. The DSP core, I/O rails, and external memories should be decoupled close to their supply pins, and system reset and clock requirements must be satisfied before high-speed memory traffic begins.
This page organizes the processor's key electrical, package, and interface characteristics with application guidance, replacement considerations, and design-focused implementation notes. It is intended to help engineers evaluate whether the 376-ball ZDU package, 400 MHz clock grade, memory configuration, and supply architecture match a specific embedded DSP design before beginning board-level implementation.
Alternativas directas para TMS320C6421ZDU4 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con TMS320C6421ZDU4 (mismo factor de forma y huella) — difiere en Core Supply Voltage, Package Type, Processor Architecture.
TMS320C6421ZDUL
✅ Sustitución directaConsulte el precio
Ver hoja de datos →TMS320C6421ZDU4 Especificaciones
| Product Type | Fixed-point digital signal processor (DSP) |
| Processor Architecture | C64x+ very-long-instruction-word architecture |
| Target Device Clock Frequency | 400 MHz |
| Maximum Device Clock Frequency | 600 MHz |
| Core Supply Voltage | 1.2 V |
| I/O Supply Voltage Options | 1.8 V or 3.3 V |
| EMIFA Data Width | 8 bit |
| DDR2 Memory Interface | 16 bit |
| SDRAM Interface | 16 bit |
| Package Type | ZDU BGA |
| Package Pin Count | 376 pins |
| Package Dimensions | 23 mm x 23 mm |
| Tipo de montaje | Surface mount |
| Junction Temperature Range | 0 °C to 90 °C |
Guía de configuración de pines de TMS320C6421ZDU4 23 mm x 23 mm
Configuración de pines para TMS320C6421ZDU4 (encapsulado 23 mm x 23 mm). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.
No hay datos detallados de patillaje disponibles para TMS320C6421ZDU4.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
TMS320C6421ZDU4 es adecuado para 6 aplicacións: Industrial Motion and Motor Control, Communications Signal Processing, Image and Video Processing, Audio and Communications Codecs, Embedded Networking Equipment, Test and Measurement Instruments.
Industrial Motion and Motor Control
TMS320C6421ZDU4 fits closed-loop motor-control systems that combine fixed-point control-law execution with high-rate sampling. Its 400 MHz C64x+ core can execute filtering, transforms, and feedback calculations while the 8-bit EMIFA and 16-bit memory paths support control data, status information, and program storage. The 376-pin ZDU package provides extensive connectivity for external memories and peripherals. A practical design should isolate timing-sensitive control signals, use controlled impedance for memory routing, and account for the 1.2 V core supply and 0 °C to 90 °C junction-temperature envelope.
Recomendado
Communications Signal Processing
TMS320C6421ZDU4 is appropriate for communications equipment that performs filtering, correlation, modulation, or packet-oriented signal processing in real time. The 400 MHz C64x+ architecture provides parallel fixed-point execution, while the 16-bit DDR2 and SDRAM interfaces can support sustained access to external data buffers. The 8-bit EMIFA expands the available asynchronous-memory and peripheral options. Board designers should allocate memory address ranges carefully, preserve signal integrity through length-matched routing, and separate the 1.2 V core rail from the 1.8 V or 3.3 V I/O domain.
Recomendado
Image and Video Processing
TMS320C6421ZDU4 can serve as the fixed-point processing engine in imaging, inspection, and video systems where pixel-stream algorithms require predictable throughput. Its 400 MHz C64x+ core supports parallel filtering, motion analysis, and transform operations, while external DDR2 or SDRAM accommodates frame and working buffers. The 376-ball BGA requires a disciplined escape-routing strategy and dense power delivery. Keep memory-bus routing over continuous reference planes, place decoupling close to supply balls, and verify thermal performance across the specified 0 °C to 90 °C junction-temperature range.
Recomendado
Audio and Communications Codecs
TMS320C6421ZDU4 supports audio front ends requiring high-rate fixed-point computation for mixing, filtering, echo processing, or communications-codec workloads. The 400 MHz processor can service multiple concurrent tasks because the C64x+ architecture executes very-long instruction words with substantial internal parallelism. Its 8-bit EMIFA and 16-bit DDR2 or SDRAM paths provide flexible access to sample buffers and control data. The implementation should use a continuous clock and ground arrangement, place audio-interface traces away from memory-bus transitions, and validate output jitter at the external interface rather than inferring it from core clock rate.
Recomendado
Embedded Networking Equipment
TMS320C6421ZDU4 is suitable for embedded network appliances that combine protocol processing with real-time traffic handling. The C64x+ processor can execute packet inspection, classification, filtering, and control algorithms while the external-memory subsystem supports structured buffer access. Dedicated 8-bit EMIFA connectivity is useful for slower control peripherals, whereas DDR2 or SDRAM can support higher-throughput data movement. The 376-pin ZDU footprint leaves room for substantial memory and interface fan-out, but the layout still requires via-aware BGA escape routing, local decoupling, and careful power-domain separation.
Recomendado
Test and Measurement Instruments
TMS320C6421ZDU4 can act as the real-time computation core in analyzers, synthesizers, and automated test equipment. Its 400 MHz fixed-point throughput is useful for filtering, calibration, waveform generation, and fast data reduction, while external DDR2 or SDRAM provides room for acquisition buffers. The processor's extensive 376-ball package also permits connection to converters, clocking circuits, and control logic. For accurate measurements, separate analog and digital grounding appropriately, use short return paths for high-speed interfaces, and characterize clock jitter, memory timing, and thermal behavior as an integrated system.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para TMS320C6421ZDU4 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | TMS320C6421ZDUL |
|---|---|---|
| Package | 376-BGA (23x23) ZDU | 376-BGA (23x23) ZDU |
| Brand | Texas Instruments | Texas Instruments |
| Device Type | Fixed-point digital signal processor | Fixed-point digital signal processor |
| Processor Architecture | C64x+ | C64x+ |
Diferenciadores clave
- Dedicated high-throughput fixed-point processing (frente a TMS320DM6431ZDU3)
- Broader synchronous-memory positioning (frente a TMS320DM6431ZDU3)
- Dedicated EMIFA connectivity (frente a TMS320DM6431ZDU3)
Notas de diseño
Plan the 376-ball BGA escape routing before finalizing the component placement. Use the manufacturer land pattern and the board fabricator's via-in-pad capability to determine whether balls should connect directly through pads or through short fan-out vias. Preserve continuous ground references beneath the escape region, avoid long stubs on memory signals, and reserve routing channels for the 16-bit DDR2 interface, where impedance control and matched propagation characteristics are essential.
Treat the 1.2 V core and 1.8 V or 3.3 V I/O supplies as independent power domains with coordinated sequencing. Place high-frequency decoupling close to the corresponding supply balls, provide distributed bulk capacitance near the memory subsystem, and verify the regulator's transient response against the C64x+ processor's activity. Check the manufacturer power-supply sequencing requirements before designing startup behavior around software-controlled enable signals.
Route DDR2 and SDRAM signals as a controlled-impedance memory subsystem with a continuous reference plane. Match trace lengths to the topology and timing requirements in the manufacturer datasheet, maintain adequate spacing between high-speed nets, and avoid plane splits beneath the memory interface. If EMIFA signals share the same board region, keep their return path continuous and confirm that asynchronous edge rates do not introduce unacceptable crosstalk.
Evaluate thermal performance from the processor, memory devices, and nearby regulators rather than from the DSP alone. The BGA provides a large thermal connection to the board, but its effectiveness depends on pad-array design, solder assembly, copper area, and enclosure airflow. Perform a thermal estimate using the actual core activity, supply voltage, ambient temperature, and board construction, then verify the resulting junction-temperature margin against the 0 °C to 90 °C device range.
Información de cumplimiento
The manufacturer product and datasheet links are provided for environmental, material, and qualification review. No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was established for this exact ordering suffix.