TMS320VC5507GBB - 200MHz Fixed-Point DSP | Texas Instruments
N.º de pieza: TMS320VC5507GBB ✓ ActivoTMS320VC5507GBB Descripción general
A digital signal processor is a semiconductor optimized to execute mathematical operations on sampled signals. Unlike a general-purpose microcontroller, a DSP commonly uses parallel execution paths and optimized memory interfaces for filtering, Fourier analysis, modulation, error correction, and other data-intensive calculations. Within the broader semiconductor hierarchy, the TMS320VC5507GBB is a DSP, embedded processor, and application-specific processing IC.
Key device-level characteristics include a 200 MHz operating frequency, fixed-point processing, a 16-bit architecture, a 1.60 V core supply, a 3.30 V I/O supply, and a 179-NFBGA package. These characteristics make the device suitable for systems requiring deterministic real-time arithmetic and a large number of peripheral and memory connections. The industrial temperature grade and ball-array package support compact embedded designs requiring numerous signal, power, and communications interfaces.
The processor architecture is intended to accelerate recurring filtering and waveform operations while offloading these tasks from higher-level control processors. Its peripheral set and external memory interfaces are central to system partitioning: one subsystem can acquire and process data while another handles communications or supervisory control. Exact memory capacities, clocking modes, peripheral assignments, and electrical limits should be confirmed in the manufacturer data manual before schematic capture.
Typical applications include industrial motor and control systems, communications infrastructure, audio and speech processing, test and measurement equipment, and embedded signal-processing modules. In each case, the 200 MHz fixed-point engine allows deterministic processing while the 179-ball package provides access to external memory and interface resources. Designers should preserve the recommended power, decoupling, and ball-grid layout requirements because high-performance DSP rails are sensitive to supply noise and trace impedance.
PCB design should use the manufacturer’s package and land-pattern data for the GBB implementation, including ball assignments and exposed thermal behavior. Power sequencing, analog and digital return paths, high-speed memory routing, and solid plane construction should be planned before layout. Firmware and software compatibility must also be checked because package selection alone does not establish that two DSP revisions have identical peripherals, boot behavior, or software support.
This page consolidates the exact orderable package information, manufacturer documentation location, sourcing links, technical comparison dimensions, and practical replacement guidance for engineers evaluating the TMS320VC5507GBB. It also distinguishes true drop-in replacements from less certain alternatives, helping PCB, firmware, and supply-chain decisions remain traceable to manufacturer documentation.
Alternativas directas para TMS320VC5507GBB — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
No hay alternativas directas disponibles para este producto.
Solicitar alternativasTMS320VC5507GBB Especificaciones
| Product Type | Fixed-point digital signal processor (DSP) |
| Frecuencia de reloj máxima | 200 MHz |
| DSP Word Length | 16 bit |
| Core Supply Voltage | 1.60 V |
| I/O Supply Voltage | 3.30 V |
| Package Type | 179-NFBGA (GBB) |
| Package Body Size | 12 x 12 mm |
| Terminal Count | 179 balls |
| Terminal Form | Ball |
| Package Shape | Square |
| Tipo de montaje | Surface mount |
| Temperature Grade | Industrial |
| Architecture | Fixed-point |
| Processor Family | TMS320C55x |
Guía de configuración de pines de TMS320VC5507GBB square
Configuración de pines para TMS320VC5507GBB (encapsulado square). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.
No hay datos detallados de patillaje disponibles para TMS320VC5507GBB.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
TMS320VC5507GBB es adecuado para 6 aplicacións: Industrial Communications, Digital Audio Processing, Motor and Control Systems, Test and Measurement, Audio and Voice Gateways, Embedded Signal Processing Module.
Industrial Communications
The TMS320VC5507GBB is suitable for communications equipment that must perform real-time filtering, modulation, or signal analysis. Its 200 MHz fixed-point architecture provides deterministic arithmetic performance, while the 179-ball NFBGA package provides extensive connections for external memory and communication peripherals. In an industrial gateway or line-card design, the processor can process incoming and outgoing sample streams without burdening a separate host processor with every filtering operation. The 1.60 V core and 3.30 V I/O rails require careful plane partitioning, and the BGA layout should follow the manufacturer’s recommended stack-up and return-path construction. Firmware must support the selected communications protocol and serialization interface, while the industrial temperature grade should be checked against the enclosure’s worst-case internal temperature.
Recomendado
Digital Audio Processing
The TMS320VC5507GBB can serve as the real-time processing engine in a speech, audio, or communications codec subsystem. Its 200 MHz fixed-point execution model supports filters, mixing, echo cancellation, and other repetitive sample-domain operations, while the 16-bit DSP architecture aligns with common audio data formats. A practical implementation would connect external memory and audio interfaces, then use the processor to manage timing-critical data movement. Because high-speed DSP boards can couple processor switching and memory activity into sensitive analog circuits, keep audio routing separated from digital return paths and maintain continuous reference planes. The manufacturer data manual should control clocking, memory connectivity, and I/O voltage requirements.
Recomendado
Motor and Control Systems
The TMS320VC5507GBB is appropriate for industrial motor-control and embedded signal-processing modules requiring deterministic calculations. A 200 MHz fixed-point processor can execute control loops, sensor conditioning algorithms, and transform functions while dedicated peripherals support external data exchange. In a controller, the DSP may process position, current, or vibration measurements and pass summarized results to a supervisory processor. Its 179-ball package allows a high pin count for memory and control connectivity, but that density also increases routing and assembly complexity. Validate control-loop timing, interrupt latency, and peripheral assignment against the device documentation. Thermal performance depends on board construction and copper area, so the package implementation and planned operating range must be reviewed before deployment.
Recomendado
Test and Measurement
The TMS320VC5507GBB is suitable for embedded instrumentation that performs real-time waveform analysis, filtering, or calibration. Its 200 MHz fixed-point execution provides a dedicated path for repetitive numerical operations while the 179-ball package supports connections to converters, memory, clocking, and external interfaces. In an instrument, the processor can combine acquisition control with time-critical processing and reduce the workload assigned to a host controller. Board design should account for separation between sensitive analog inputs and the processor’s high-speed digital activity, using controlled return paths and the manufacturer’s recommended layout to limit coupling. Firmware architecture should include deterministic buffering and transfer handling because real-time acquisition performance depends on memory latency and external-interface timing as well as processor clock frequency.
Recomendado
Audio and Voice Gateways
The TMS320VC5507GBB can act as a voice-processing gateway between network interfaces and audio channels in embedded communications equipment. Its 200 MHz fixed-point architecture is well matched to operations such as sample-rate conversion, filtering, echo processing, and voice-feature extraction. The 179-ball NFBGA interface density permits concurrent access to program or data memory and multiple peripherals, enabling a compact module with substantial processing capability. Deployment should preserve strict separation between clock, memory, and I/O routing to avoid degrading signal integrity around sensitive audio circuitry. The 1.60 V core and 3.30 V I/O rails require independent filtering and appropriate plane construction, while production software must be validated for channel timing, interrupt behavior, and the exact peripheral assignments used by the design.
Recomendado
Embedded Signal Processing Module
The TMS320VC5507GBB is appropriate for a compact embedded module dedicated to real-time filtering, spectral analysis, or waveform transformation. Its 200 MHz processing clock allows a dedicated processor to handle a defined signal-processing task without continuous interference from general-purpose control software. The 179-ball package provides the connection density needed for external memory and multiple interfaces, although the resulting board requires disciplined BGA layout, power delivery, and thermal planning. A module designer should use the manufacturer’s recommended decoupling network and preserve continuous supply and ground planes beneath the device. Software should be structured around deterministic real-time constraints, verified buffer sizes, and a controlled peripheral configuration. For long product lifetimes, also confirm lifecycle status and second-source requirements before freezing the mechanical design.
Recomendado
Datos de referencia de ingeniería para TMS320VC5507GBB — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto |
|---|---|
| Brand | Texas Instruments |
| Package | 179-NFBGA (GBB), 12 x 12 mm |
| Processor Type | Fixed-point digital signal processor |
| Maximum Clock Frequency | 200 MHz |
| DSP Word Length | 16 bit |
| Core Supply Voltage | 1.60 V |
| I/O Supply Voltage | 3.30 V |
| Terminal Count | 179 balls |
| Temperature Grade | Industrial |
| Mounting Type | Surface mount |
Diferenciadores clave
- High-rate fixed-point processing in a compact package (frente a TMS320VC5507 device-family options in other packages)
- Industrial-grade ordering option (frente a Consumer-temperature package variants)
- Dedicated processor partitioning for real-time workloads (frente a General-purpose microcontrollers)
Notas de diseño
Plan separate, low-impedance distribution for the 1.60 V core and 3.30 V I/O rails. Place local decoupling capacitors at the appropriate package power and ground balls, following the manufacturer’s recommended values, voltage ratings, and placement. Establish power-up and power-down behavior in the system controller so internal rails are not exposed to an unsupported sequence. Review peak core and I/O current requirements against the selected clock and peripheral configuration before finalizing supply capacity.
Use the Texas Instruments GBB land pattern and the 179-ball mechanical drawing rather than a generic BGA footprint. Account for solder-mask definition, pad size, paste stencil, ball pitch, and assembly requirements in the PCB library. Because the package is only 12 x 12 mm with a high ball count, escape routing can constrain component placement and via access; perform stack-up and routing studies before committing the board outline.
Route clocks and high-speed memory interfaces on controlled layers with continuous reference planes and minimal return-path discontinuities. Match external clock, memory, and serial-interface timing to the electrical characteristics in the manufacturer data manual. Keep analog inputs and sensitive audio or sensor paths away from processor clock and memory activity, and provide intentional return paths beneath switching circuitry to limit common-mode noise and electromagnetic coupling.
Evaluate junction temperature using the actual board stack-up, copper distribution, airflow, and worst-case clock and I/O activity. The BGA footprint provides many solder connections, but total thermal performance depends on spreading heat through the PCB rather than relying only on package geometry. Keep uninterrupted ground-plane copper beneath the processor where the manufacturer layout permits it, and avoid placing heat-generating components in the device’s immediate thermal path. Validate the final assembly in its intended enclosure.
Do not treat another package in the TMS320VC5507 family, or a functionally similar DSP from another architecture, as a drop-in replacement. A valid exchange must preserve the GBB ball map, electrical limits, peripheral allocation, boot behavior, memory interface, and required software image. Review revision-specific device details and errata as well. Mechanical similarity alone is insufficient because a BGA package can match in body size while differing substantially in ball count, pitch, or signal assignment.
Información de cumplimiento
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations are present in the available product information. The industrial temperature grade is stated, but it does not establish AEC-Q100 qualification.