USB2534I-1080AEN - 4-Port USB 2.0 Hub | Microchip
N.º de pieza: USB2534I-1080AEN ✓ ActivoUSB2534I-1080AEN Descripción general
A USB hub controller is an interface semiconductor that manages traffic between one upstream host connection and multiple downstream USB ports. Within the USB interface hierarchy, it belongs to the USB hub-controller family of USB interface ICs. The MTT architecture helps consolidate low-speed and Full-Speed transaction handling through a high-speed path, reducing the number of direct host connections required by an embedded system.
Key features include four downstream USB 2.0 ports, OEM configurability, low-power operation, and compliance with the USB 2.0 Specification and its Link Power Management Addendum. The industrial-temperature option is identified by the I designation in the ordering code. The SQFN-36 surface-mount package supports compact integration on embedded equipment while exposing the hub-control and power-management functions required in systems with multiple peripheral connections.
The USB2534I-1080AEN can attach to an upstream Full-Speed port as a Full-Speed hub or operate as a Full-Speed and Hi-Speed hub when the upstream link supports Hi-Speed operation. Its transaction-translation architecture separates low-speed device traffic from the high-speed host path, allowing one controller to support a mixture of USB device speeds. Exact electrical ratings, configuration requirements, and operating limits must be confirmed in the manufacturer datasheet.
Typical uses include industrial HMIs, point-of-sale terminals, medical equipment, printers, data-acquisition systems, set-top boxes, and embedded computing platforms that need to consolidate several USB peripherals behind one host port. The device is particularly relevant where a product requires more peripherals than the host controller directly supports or where separate USB transceivers would increase board complexity.
Design work should begin with the hub controller's reference configuration, required external crystal or clock source, power rails, port-protection components, and the USB 2.0 routing guidance in the manufacturer datasheet. Differential pair routing, return-path continuity, grounding, and connector-side protection are as important as logical hub configuration because these controllers must coordinate multiple high-speed links in one enclosure.
This product page combines manufacturer feature data, exact-order-code identification, practical application guidance, and a parameter-by-parameter comparison with related USB2534 variants. It also distinguishes confirmed drop-in candidates from configurations that require schematic, firmware, and PCB verification before substitution.
Alternativas directas para USB2534I-1080AEN — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con USB2534I-1080AEN (mismo factor de forma y huella) — difiere en Package.
USB2534-1080AEN
✅ Sustitución directaConsulte el precio
Ver hoja de datos →USB2534I-1081AEN
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
USB2534I-1050AEN
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
USB2534I-1080AEN Especificaciones
| Product Type | USB 2.0 hub controller |
| Downstream Port Count | 4 ports |
| USB Specification | USB 2.0 |
| Upstream Full-Speed Hub Support | Supported |
| Upstream Hi-Speed Hub Support | Supported |
| Transaction Architecture | MTT (Multi-Transaction Translator) |
| OEM Configurability | Supported |
| Link Power Management | USB 2.0 Link Power Management Addendum support |
| Temperature Grade | Industrial temperature |
| Encapsulado | 36-SQFN (6 x 6 mm) |
| Tipo de montaje | Surface mount |
Guía de configuración de pines de USB2534I-1080AEN 36-sqfn (6 x 6 mm)
Configuración de pines para USB2534I-1080AEN (encapsulado 36-sqfn (6 x 6 mm)). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.
No hay datos detallados de patillaje disponibles para USB2534I-1080AEN.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
USB2534I-1080AEN es adecuado para 6 aplicacións: Industrial Human-Machine Interfaces, Point-of-Sale Terminals, Medical Diagnostic Consoles, Embedded Data-Acquisition Systems, Printers and Multifunction Peripherals, Set-Top and Connected Media Systems.
Industrial Human-Machine Interfaces
The USB2534I-1080AEN fits industrial HMI platforms that must connect keyboards, touch controllers, barcode scanners, storage devices, and service interfaces through one upstream USB connection. Its four downstream ports consolidate peripheral connectivity, while MTT transaction translation manages the mixture of Full-Speed, Low-Speed, and Hi-Speed devices typically attached to an embedded operator panel. The industrial-temperature designation supports deployments subject to extended temperature requirements. Use the manufacturer reference configuration to establish upstream and downstream routing, and preserve continuous ground returns beneath every USB 2.0 differential pair.
Point-of-Sale Terminals
Point-of-sale equipment commonly combines a touchscreen, printer, card reader, scanner, and removable storage behind a single host interface. The USB2534I-1080AEN provides four downstream USB 2.0 ports and transaction translation for this mixed-speed peripheral environment. Its OEM-configurable design allows port behavior to be aligned with the product's firmware and power-management architecture. Place the hub controller near the connector exit, apply the datasheet's high-speed layout practices, and verify power-switching limits for externally attached devices before finalizing the enclosure and connector design.
Medical Diagnostic Consoles
A medical diagnostic console may require dedicated USB connections for a display interface, keyboard, printer, service adapter, and isolated peripheral while preserving a manageable host-port budget. The USB2534I-1080AEN's four-port USB 2.0 hub architecture and MTT transaction handling fit that requirement, and the I ordering option identifies an industrial-temperature variant for equipment subject to broader environmental conditions. Medical suitability must be assessed for the complete system, including isolation, EMC, patient-contact boundaries, and applicable regulatory procedures. The controller's datasheet configuration must not replace system-level safety validation.
Embedded Data-Acquisition Systems
Data-acquisition equipment often mixes high-bandwidth storage with control peripherals, measurement interfaces, and configuration adapters. The USB2534I-1080AEN allows one upstream host connection to expand into four downstream USB 2.0 ports while MTT separates low-speed and Full-Speed transactions from the hub's high-speed path. This is useful when the host controller has limited direct port capacity or when each external interface benefits from controlled hub topology. Validate enumeration behavior, bus-power budgets, cable lengths, and connector protection against the acquisition system's operating environment.
Printers and Multifunction Peripherals
Printers and multifunction peripherals can benefit from an internal USB hub when they need to expose a host connection together with removable-media, status, or service interfaces. The USB2534I-1080AEN supports four downstream ports in a compact 36-SQFN package, helping reduce connector wiring and board-area requirements. Because external USB devices may request substantial current, the system must evaluate available bus power and enforce protection at every exposed port. High-speed pairs should be routed as controlled 90-ohm differential links with uninterrupted reference planes and no stubs.
Set-Top and Connected Media Systems
Set-top boxes and connected media systems often require USB connectivity for storage, keyboards, network adapters, and service diagnostics. The USB2534I-1080AEN provides four downstream USB 2.0 ports with MTT transaction translation and Full-Speed or Hi-Speed upstream operation, allowing the design to scale peripheral support without allocating multiple host-controller ports. Its OEM-configurable architecture can support product-specific port behavior and power management. Implement the manufacturer's reference clock, decoupling, and layout recommendations, then test enumeration across every intended peripheral-speed combination.
Datos de referencia de ingeniería para USB2534I-1080AEN — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | USB2534-1080AEN | USB2534I-1081AEN | USB2534I-1050AEN |
|---|---|---|---|---|
| Package | 36-SQFN (6 x 6 mm) | 36-SQFN (6 x 6 mm) | 36-SQFN (6 x 6 mm) | 36-SQFN (6 x 6 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| USB Specification | USB 2.0 | USB 2.0 | USB 2.0 | USB 2.0 family |
Diferenciadores clave
- Industrial-temperature ordering option within the four-port USB2534 family (frente a USB2534-1080AEN)
- Four downstream ports with MTT transaction translation (frente a USB2514BI-AEZG)
- OEM-configurable architecture for embedded product integration (frente a USB2534I-1081AEN)
Notas de diseño
Route every USB 2.0 high-speed differential pair as a controlled-impedance 90-ohm connection over a continuous reference plane. Keep upstream and downstream traces matched in geometry, avoid stubs, minimize layer transitions, and do not run high-speed signals adjacent to switching nodes or crystal circuitry. Maintain a continuous ground reference beneath each pair and place connector ESD protection close to the board entry point.
Calculate the worst-case port-current budget for all four downstream connections before assigning USB power switching. Check the hub controller's operating voltage, regulator headroom, inrush behavior, and the current rating of every power-distribution element against the manufacturer limits. Place local decoupling at the supply pins using the capacitance and placement specified in the reference design, and keep high-current switching paths away from sensitive USB routing.
Do not treat a shared package name as sufficient proof of interchangeability. Review the exact ordering-code table for temperature grade, crystal or clock configuration, firmware features, port personalities, and exposed-pad requirements. USB2514 and USB2512 family parts should not be assumed to match USB2534 pin assignments. Before substitution, compare every numbered SQFN pin, power sequence, configuration pins, and firmware configuration.
USB hub designs combine several cable-connected ports, increasing the chance of ESD, radiated-noise, and ground-bounce problems. Use short protection paths to chassis or device ground as directed by the system architecture, maintain low-impedance grounding around connectors, and separate external cable entry points. Validate emissions and immunity with the final cable lengths, enclosure, power supply, and peripheral mix because laboratory performance at the controller alone does not represent the finished product.
Estimate the controller's dissipation from its actual supply voltage, operating current, and activity level rather than using only the maximum bus-load label. Include regulator loss and downstream power-switching loss when assessing enclosure temperature. Keep the SQFN thermal pad connected to the ground plane with the manufacturer-recommended via pattern, but verify that the pad and exposed thermal features are not misassigned as signal pins in the PCB library.
Información de cumplimiento
The exact MPN's RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive-qualification declarations were not established from the exact product records and must be confirmed with Microchip Technology.