VBUS054DD-HF4 - 4-Line USB ESD Protection TVS Array | Vishay
N.º de pieza: VBUS054DD-HF4 ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $0.62 | $0,62 |
| 10 | $0.55 | $5,50 |
| 100 | $0.41 | $41,00 |
| 500 | $0.32 | $160,00 |
| 1.000 | $0.27 | $270,00 |
| 3.000 | $0.21 | $630,00 |
VBUS054DD-HF4 Descripción general
A TVS (Transient Voltage Suppressor) diode array is a discrete semiconductor protection device that clamps fast transient overvoltages to safe levels, protecting downstream ICs from ESD, cable discharge, and surge events. TVS arrays belong to the broader protection-device hierarchy of diodes -> discrete semiconductors, and are commonly co-packaged as multi-channel arrays for high-speed serial interfaces where low capacitance is critical to avoid degrading signal integrity.
Key features include a working range of 5 V, snap-back clamping behavior, an operating temperature range of -40 °C to +125 °C, and a maximum peak pulse power dissipation tailored for USB 2.0 hot-plug and VBUS short-to-battery events. The LLP1010-5L package (1.0 mm × 1.0 mm) is roughly one-fourth the footprint of an SOT-23, enabling ultra-compact designs in mobile phones, wearables, and HDMI/USB-C accessories where board real estate is at a premium.
Architecturally, the VBUS054DD-HF4 integrates zener-based steering diodes that divert transient current away from protected data lines into the ground rail. The flow-through pinout routes D+/D- straight through the package while pin 5 serves as the common ground return, minimizing parasitic inductance and stub effects that would otherwise degrade USB 2.0 high-speed eye diagrams.
Typical applications include USB 2.0 / OTG port protection on smartphones and tablets, HDMI / DisplayPort interface ESD clamps, and 5 V VBUS rail transient protection on docking stations. The 0.8 pF typical capacitance makes it compatible with both USB 2.0 (480 Mbps) and low-speed USB 1.1 signaling.
When designing with this device, place it as close as possible to the external connector and ensure a low-impedance ground connection to pin 5. For USB 2.0 high-speed links, maintain 90 Ω differential impedance through the array and avoid routing high-current transient return paths underneath signal traces.
Alternativas directas para VBUS054DD-HF4 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
VBUS054DD-HF4-GS08
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
VBUS054DD-HF4-GS18
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
VBUS054DD-HF4 Especificaciones
| Configuration | 4-line bus-port ESD protection |
| Working Voltage (Vrwm) | 5 V |
| Clamping Voltage | 19 V at 3 A (8/20 µs) |
| Peak Pulse Current (Ipp) | 3 A (8/20 µs) |
| ESD Air Discharge | ±15 kV per IEC 61000-4-2 |
| Line Capacitance | 0.8 pF typical |
| Breakdown Voltage (VBR) | 6.9 V to 8.7 V |
| Number of Protected Lines | 4 |
| Diode Type | Transient Voltage Suppressor (TVS), Zener steering |
| Arrangement | Common anode / steering-diode array |
| Encapsulado | LLP1010-5L (1.0 mm × 1.0 mm) |
| Tipo de montaje | Surface Mount |
| Temperatura de funcionamiento | -40 °C to +125 °C |
| Marking Code | xC |
| Estado RoHS | Compliant (HF4 suffix = Halogen-Free, RoHS-compliant) |
| Pinout | Flow-through (D1+, D2+, D1-, D2- on pins 1-4; GND on pin 5) |
Configuración de pines de VBUS054DD-HF4
| Pin 1 | D1+ — Data line 1 positive (USB D+ or HDMI TMDS0+) |
| Pin 2 | D2+ — Data line 2 positive (USB VBUS or HDMI TMDS1+) |
| Pin 3 | D1- — Data line 1 negative (USB D- or HDMI TMDS0-) |
| Pin 4 | D2- — Data line 2 negative (HDMI TMDS1-) |
| Pin 5 | GND — Common ground return for all four protected lines; tie to chassis ground with low-impedance path |
Aplicaciones típicas
VBUS054DD-HF4 es adecuado para 6 aplicacións: USB 2.0 Type-A Port ESD Protection, Smartphone / Mobile Device Charging Port, HDMI / DisplayPort Interface ESD Clamp, Docking Station / Hub Downstream Port, Automotive Infotainment USB Port, Wearable / Fitness Tracker Side Port.
USB 2.0 Type-A Port ESD Protection
The VBUS054DD-HF4 protects two USB 2.0 high-speed data lines (D+/D-) and the 5 V VBUS rail on a type-A connector. With 0.8 pF typical line capacitance the array adds <1 dB insertion loss at 240 MHz, preserving the USB 2.0 high-speed eye mask. The 19 V clamp voltage and ±15 kV air-discharge rating handle cable-discharge events that occur when a charged cable is plugged into an unpowered host. Place the array within 3 mm of the connector body and tie pin 5 (GND) to the chassis ground plane through 4 vias to maximize transient energy dissipation.
Recomendado
Smartphone / Mobile Device Charging Port
Smartphone micro-USB / USB-C connectors experience daily mechanical wear and ESD events from human contact. The VBUS054DD-HF4's ultra-compact 1.0 mm × 1.0 mm LLP1010-5L footprint saves ~70% board area versus SOT-23 alternatives, a critical advantage in compact phones. The -HF4 halogen-free, RoHS-compliant finish meets Apple and Samsung green-material requirements. Its 19 V clamp tolerates VBUS inductive kickback from in-rush currents during hot-plug charging events, preventing downstream USB controller damage.
Recomendado
HDMI / DisplayPort Interface ESD Clamp
HDMI and DisplayPort TMDS pairs (4 high-speed differential lines per connector) require sub-1 pF capacitance to maintain the 3.4 Gbps / 5.4 Gbps link signal integrity. The VBUS054DD-HF4's 4-line array protects exactly one TMDS pair plus the +5 V supply and hot-plug-detect pin. Its 0.8 pF typical capacitance introduces minimal jitter, while ±15 kV air-discharge rating complies with HDMI 1.4 ESD stress tests. Place the array immediately adjacent to the HDMI connector body to minimize loop area on the discharge path.
Recomendado
Docking Station / Hub Downstream Port
Docking stations typically expose 4-8 downstream USB ports that each need independent ESD protection. The VBUS054DD-HF4's small footprint allows one TVS array per port without crowding the PCB. Its 19 V clamp and 3 A peak pulse current handle the energy from a VBUS short-to-battery fault on an attached device, protecting the upstream hub controller (such as USB2513B-AEZC). Tie pin 5 to the chassis ground plane to bleed chassis-coupled transients.
Recomendado
Automotive Infotainment USB Port
In-vehicle USB ports experience harsher ESD events from occupant contact plus ISO 7637-2 transient disturbances on the 12 V supply rail. The VBUS054DD-HF4's -40 °C to +125 °C operating range covers the AEC-Q100 automotive temperature window, and its 19 V clamp tolerates the load-dump transients typical of automotive power nets. Pair the array with a bulk TVS such as the SMBJ24A on the VBUS rail for two-stage protection.
Recomendado
Wearable / Fitness Tracker Side Port
Fitness bands and smartwatches expose charging pins that, while not true USB, mimic the D+/D-/VBUS topology and require the same ±15 kV ESD robustness. The VBUS054DD-HF4's 1 mm × 1 mm footprint fits within a 6 mm × 6 mm PCB corner near the pogo-pin landing pad. Its 19 V clamp tolerates the inductive kick from the magnetic charging-cable disconnect event, protecting the battery-management IC. Choose the -HF4 halogen-free finish to comply with medical-adjacent wearable material standards.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para VBUS054DD-HF4 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | VBUS054DD-HF4-GS08 | VBUS054DD-HF4-GS18 | USBLC6-2SC6 | RClamp0521P |
|---|---|---|---|---|---|
| Brand | Vishay Intertechnology | Vishay Intertechnology | Vishay Intertechnology | STMicroelectronics | Semtech |
| Package | LLP1010-5L (1.0 × 1.0 mm) | LLP1010-5L - same | LLP1010-5L - same | SOT-23-6 - different (not pin-compatible) | SLP1006P2 - different (not pin-compatible) |
| Working Voltage (Vrwm) | 5 V | 5 V | 5 V | 5 V | 5 V |
| Clamping Voltage | 19 V at 3 A | 19 V at 3 A | 19 V at 3 A | 17 V at 5 A (tighter clamp) | 13 V at 1 A (tighter clamp) |
| Peak Pulse Current (8/20 µs) | 3 A | 3 A | 3 A | 5 A (higher rating) | 1 A (lower rating) |
| Line Capacitance | 0.8 pF typical | 0.8 pF | 0.8 pF | 1 pF (slightly higher) | 0.5 pF (lower) |
| Number of Protected Lines | 4 | 4 | 4 | 4 (2 data + VBUS + ID) | 1 (single line) |
| RoHS / Halogen-Free | Yes (HF4 suffix) | Yes | Yes | Yes (ECOPACK) | Yes |
Diferenciadores clave
- Ultra-compact 1.0 × 1.0 mm LLP1010-5L footprint (frente a USBLC6-2SC6 (SOT-23-6))
- Flow-through pinout matches D+/D-/VBUS routing (frente a USBLC6-2SC6 (SOT-23-6))
- Halogen-free, RoHS-compliant -HF4 finish (frente a Older Vishay VBUS054DD variants without -HF4 suffix)
Notas de diseño
Place the VBUS054DD-HF4 within 3 mm of the USB or HDMI connector body to minimize the transient discharge loop. The flow-through pinout (pins 1-4 carry D+/D-/VBUS signals; pin 5 is GND) requires that pin 5 be tied to the chassis ground plane through a minimum of 4 vias to provide a low-impedance return path for ESD current. Avoid routing high-current transient return paths underneath the protected signal traces to prevent coupling.
For USB 2.0 high-speed (480 Mbps) operation, maintain 90 Ω differential impedance through the VBUS054DD-HF4 footprint. The 0.8 pF typical capacitance introduces <1 dB insertion loss at 240 MHz, but PCB stub effects from improper pin 1/2/3/4 fanout can dominate signal degradation. Use a symmetrical pinout with matched trace lengths on D+ and D- and avoid via transitions within 5 mm of the array.
Estimated: under an 8/20 µs 3 A peak pulse, instantaneous power dissipation reaches 57 W in the VBUS054DD-HF4. While the pulse duration is short, repeated stress events (e.g., a hot-plug arc every few minutes in a test environment) can raise junction temperature. Ensure at least 10 mm² of 1 oz copper under the LLP1010-5L thermal pad for heat spreading, and consider the SMBJ24A on the VBUS rail as a coarser first-stage clamp to reduce stress on this part.
Do not use the VBUS054DD-HF4 to protect CC/SBU lines on USB Type-C ports without verifying that the 19 V clamp voltage is within the CC pin's 5 V tolerant specification - the 19 V clamp may damage the CC logic. For USB Type-C, use a dedicated CC protection part such as the TPD4E05U06 or ESD8004 instead. Also note that the -HF4 suffix indicates halogen-free finish; if a non-halogen-free version is required, the bare VBUS054DD-HF4 (without -HF4) is no longer widely stocked.
Información de cumplimiento
The -HF4 suffix indicates Halogen-Free and RoHS-compliant finish. Not AEC-Q100 qualified - consult Vishay's automotive-grade TVS arrays for AEC-Q100 requirements.
