VSC8582XKS-10 - Dual-Port Gigabit Ethernet PHY | Microchip
N.º de pieza: VSC8582XKS-10 ✓ ActivoVSC8582XKS-10 Descripción general
A Gigabit Ethernet PHY is the physical-layer component that converts digital network data into electrical signaling for copper or optical media and converts received signaling back into data for the MAC and host system. In the product hierarchy, the VSC8582 belongs to Ethernet interface ICs, then network interface controllers, then integrated interface semiconductors. Integrating two Gigabit ports in one device reduces the component count and simplifies control of paired copper-and-fiber network links.
Key features include two Gigabit Ethernet ports, support for 10BASE-T, 100BASE-TX, and 1000BASE-T operation, IEEE 1588 precision timing, and QSGMII/SGMII MAC connectivity. The device also incorporates Microchip Intellisec security capabilities and VeriTime timing technology, as identified by the manufacturer. Its 4 ns timing specification supports high-speed packet-processing environments where deterministic network timing matters.
The VSC8582 architecture connects each Ethernet port to an external MAC through high-speed serial or quad serial interfaces. QSGMII provides four parallel Gigabit channels, while SGMII carries one Gigabit channel over a serial link. This flexibility lets designers select the MAC interface appropriate to the switch, router, or endpoint controller while retaining shared copper-and-fiber front ends.
Typical uses include enterprise access switches, industrial Ethernet equipment, smart-grid infrastructure, video-network endpoints, cloud-network appliances, and secure communications systems. The dual copper/fiber arrangement is especially useful for equipment that must bridge traditional copper LAN ports and fiber uplinks without relying on separate physical-layer devices.
A primary design consideration is matching the MAC clocking, SerDes, and reference-clock architecture to the selected QSGMII or SGMII interface. The manufacturer datasheet should be used to assign power, ground, clock, reset, management, and media-side connections before PCB routing. Decoupling, controlled clock distribution, and high-speed differential return paths are essential for reliable operation.
This product page combines the exact VSC8582XKS-10 ordering information, verified technical attributes, interface-use guidance, and clearly bounded drop-in comparison information. It also distinguishes directly documented variants from similarly named devices that cannot be assumed to be replacements.
Alternativas directas para VSC8582XKS-10 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con VSC8582XKS-10 (mismo factor de forma y huella) — difiere en MAC Interface, Mounting Type, Number of Ethernet Ports, Package.
VSC8582XKS-14
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
VSC8582XKS-10 Especificaciones
| Number of Ethernet Ports | 2 ports |
| Maximum Ethernet Data Rate | 1000 Mbit/s |
| Supported Copper Rates | 10BASE-T, 100BASE-TX, and 1000BASE-T |
| Copper/Fiber Support | Dual-port Cu/Fiber PHY |
| MAC Interface | QSGMII/SGMII |
| Timing Standard | IEEE 1588 |
| Timing Performance | 4 ns |
| Parallel Interface Width | 128/256 bits |
| Synchronous Ethernet Support | Supported |
| Security Feature | Intellisec |
| Timing Feature | VeriTime |
| Encapsulado | 256-PBGA (17 x 17 mm) |
| Lead-Free Status | Lead-free |
| Tipo de montaje | Surface mount |
| Ethernet Media Type | Copper and fiber |
| Product Family | VSC8582 |
Guía de configuración de pines de VSC8582XKS-10 256-pbga (17 x 17 mm)
Configuración de pines para VSC8582XKS-10 (encapsulado 256-pbga (17 x 17 mm)). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.
No hay datos detallados de patillaje disponibles para VSC8582XKS-10.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
VSC8582XKS-10 es adecuado para 6 aplicacións: Enterprise Access Switching, Industrial Ethernet Equipment, Smart-Grid Communications, Secure Network Appliances, Video Network Equipment, Fiber-Copper Network Bridges.
Enterprise Access Switching
The VSC8582XKS-10 fits access-switch designs requiring two Gigabit network links per PHY section. Its dual-port architecture places 10/100/1000BASE-T copper connectivity alongside fiber capability, while QSGMII and SGMII provide flexible MAC-facing options. A QSGMII switch or endpoint controller can use the parallel interface for aggregate traffic, whereas SGMII can simplify a one-port-per-connection architecture. The 4 ns timing characteristic is relevant when the switching system also carries synchronized traffic. Board design must preserve the high-speed clock and differential-signal integrity demanded by the selected MAC interface, while the dual media support can reduce the number of separate PHY devices needed at an access panel.
Recomendado
Industrial Ethernet Equipment
The VSC8582XKS-10 is suitable for industrial controllers, communication gateways, and field equipment that need two high-speed network ports. Copper connectivity supports conventional plant networks, while the fiber capability allows longer or electrically isolated links to be introduced without changing to an entirely different PHY family. IEEE 1588 and VeriTime support can assist designs that require deterministic packet timing across industrial networks. The QSGMII option can reduce external serial links when connected to a compatible switch ASIC, and SGMII provides a lower-pin-count option for simpler MAC connections. Final product qualification should confirm the device's operating-temperature limits, isolation requirements, grounding strategy, and compliance with the applicable industrial network specification.
Recomendado
Smart-Grid Communications
The VSC8582XKS-10 can support smart-grid endpoints that combine copper-connected field equipment with fiber links between substations or control centers. IEEE 1588 timing support and the listed 4 ns timing performance are useful in systems where message synchronization matters across wide physical distances. The two-port configuration also allows a local copper diagnostic or management link to coexist with an uplink. QSGMII may be appropriate for centralized packet switching, while SGMII can suit a controller with a dedicated serial interface. Engineering validation must include the final grid topology, synchronization algorithm, reference-clock quality, isolation boundary, and network timing budget rather than relying on the PHY's timing specification alone.
Recomendado
Secure Network Appliances
The VSC8582XKS-10 is appropriate for secure gateways and cloud-network appliances that need two Gigabit physical-network connections. Intellisec provides the manufacturer-identified security capability, while the dual copper/fiber PHY supports flexible WAN or LAN connectivity. QSGMII can connect the PHY to a high-throughput packet engine when parallel throughput is preferred, and SGMII can reduce pin requirements where a single high-speed serial channel is sufficient. The 128/256-bit interface description supports the device's use in data-plane-oriented networking equipment. Security-sensitive designs should still implement authentication, key management, boot protection, and secure firmware controls at the system level rather than treating the PHY's security feature as a complete product security solution.
Recomendado
Video Network Equipment
The VSC8582XKS-10 can serve IP-camera gateways, video aggregation systems, and networked display controllers that require high-throughput Ethernet links. Two Gigabit ports allow an upstream connection and a downstream or pass-through connection to coexist, while copper/fiber support helps bridge installations that mix media types. The 4 ns timing characteristic is useful in synchronized multimedia systems, although end-to-end synchronization also depends on the host clocking and network infrastructure. QSGMII suits packet engines requiring parallel traffic paths, whereas SGMII can simplify connections to embedded controllers. PCB implementation should account for high-speed clock routing, controlled impedance, adequate connector launch geometry, and separation between sensitive timing and power-conversion circuitry.
Recomendado
Fiber-Copper Network Bridges
The VSC8582XKS-10 is well suited to network bridges and communication gateways that need both copper and fiber media in a compact design. Its two Gigabit PHY ports can support a copper-side local connection and a fiber-side uplink, reducing the need for separate physical-layer components. The QSGMII interface can support a quad-Gigabit switching arrangement, while SGMII allows a more compact connection to a dedicated MAC. IEEE 1588 and VeriTime features provide timing functions that may benefit industrial or infrastructure networks. In practice, optical media requires external PHY or transceiver circuitry where appropriate, and the finished design must follow the manufacturer's media-side circuit and layout guidance to maintain reliable data transmission and compliant network behavior.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para VSC8582XKS-10 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | VSC8582XKS-14 |
|---|---|---|
| Package | 256-PBGA (17 x 17 mm) | 256-PBGA (17 x 17 mm) |
| Brand | Microchip Technology | Microchip Technology |
| Product Family | VSC8582 | VSC8582 |
| Ethernet Ports | 2 ports | 2 ports |
| Maximum Ethernet Rate | 1000 Mbit/s | 1000 Mbit/s |
| Copper and Fiber Support | Cu/Fiber | Cu/Fiber |
| MAC Interface | QSGMII/SGMII | QSGMII/SGMII |
| IEEE 1588 Support | Supported | Supported |
| Interface Width | 128/256 bits | 128/256 bits |
Diferenciadores clave
- Combines two Gigabit copper/fiber PHY ports in one package (frente a VSC8582XKS-14)
- Supports both parallel and serial MAC-facing architectures (frente a VSC8582XKS-14)
- Combines precision timing with network security functions (frente a VSC8582XKS-14)
Notas de diseño
Route QSGMII and SGMII signals as controlled-impedance differential pairs with continuous reference planes and minimized stubs. Keep clock distribution symmetrical and isolate noisy switching nodes from the PHY's timing-sensitive nets. The manufacturer's VMDS-10421 layout guidance should be treated as the authority for exact ball assignments, trace spacing, via construction, and media-side component placement.
Use the manufacturer's recommended power-supply topology and decoupling network at every supply ball, paying particular attention to the 256-PBGA package's power and ground distribution. Place high-frequency bypass capacitors close to their associated device connections and provide adequate return paths beneath high-speed links. Confirm supply tolerances, sequencing, and startup behavior against the datasheet before releasing the PCB.
Do not treat the -10 and -14 suffixes as interchangeable without checking the ordering information. Both are identified with the VSC8582 family and 256-PBGA format, but the manufacturer documentation must establish whether the suffix changes device function, temperature grade, or another ordering attribute. Also avoid confusing a similar VSC family such as VSC8574 with a direct replacement.
Account for connector and package transitions when designing a 1000 Mbit/s link, including impedance discontinuities, via stubs, return-path discontinuities, and loss from long traces. Use the manufacturer's media-interface circuit and PCB guidance, and validate the completed assembly through signal-integrity and Ethernet compliance testing rather than relying only on nominal clock frequency.
Información de cumplimiento
The product listing identifies the VSC8582XKS-10 as lead-free. RoHS, REACH, halogen-free, and conflict-minerals status are not explicitly established by the available manufacturer product information.