XA7A100T-2CSG324I - 101440-Cell FPGA | AMD | Industrial Control
N.º de pieza: XA7A100T-2CSG324I ✓ ActivoXA7A100T-2CSG324I Descripción general
An FPGA is a semiconductor whose digital circuits are configured after manufacture. In the device hierarchy, an FPGA sits below programmable logic and system-level programmable devices, while providing parallel configurable resources rather than a fixed instruction sequence. Artix-7 devices combine configurable logic blocks, programmable I/O, DSP resources, block RAM, clocking, and high-speed serial transceivers for embedded, industrial, communications, and test applications.
The Artix-7 XA family provides 101,440 logic cells, 7,925 LABs/CLBs, 4,976,640 RAM bits, and 210 user I/O according to the manufacturer-related product information. The 324-LFBGA package reduces PCB footprint compared with larger packages, making the device suitable for compact modules and control systems. Its industrial -2 speed grade supports predictable performance across temperature-qualified industrial operating conditions.
The architecture allows parallel data acquisition, protocol bridging, control-loop execution, image processing, and hardware acceleration without relying on a general-purpose processor for every operation. Dedicated RAM and DSP resources can handle buffering and fixed-point arithmetic, while the 210 available I/O support external interfaces and high-speed data paths. Designers should still verify timing, voltage requirements, pin constraints, and thermal performance for the complete design.
Typical uses include industrial automation, camera and vision preprocessing, communications infrastructure, instrumentation, and embedded control. The large logic capacity supports multiple parallel channels, while the compact CSPBGA package makes dense systems possible when careful ball-out, assembly, and thermal management are required.
The most important PCB consideration is power delivery around the large BGA package. Use the manufacturer package-pinout files and device power requirements to define plane splits, decoupling, and via placement. Confirm that the PCB stack-up, assembly process, and test access meet the requirements for a 324-ball device before committing to a board revision.
This product page combines exact ordering information, package and resource details, drop-in replacement analysis, comparison parameters, and practical design guidance to support faster FPGA sourcing and hardware planning.
Alternativas directas para XA7A100T-2CSG324I — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con XA7A100T-2CSG324I (mismo factor de forma y huella) — difiere en Package, Block RAM, Logic Cells, Speed Grade, Process Technology.
XC7A100T-2CSG324I
✅ Sustitución directa✓ En stock
$105 / unidad
Ver hoja de datos →XC7A100T-2CSG324C
✅ Sustitución directa✓ En stock
$59.5 / unidad
Ver hoja de datos →XC7A100T-1CSG324C
✅ Sustitución directa✓ En stock
$59.9 / unidad
Ver hoja de datos →XA7A100T-1CSG324I
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XA7A100T-1CSG324Q
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
XC7A75T-L1CSG324I
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XA7A100T-2CSG324I Valores máximos y características eléctricas
| Device Type | Artix-7 XA Field Programmable Gate Array (FPGA) |
| Logic Cells | 101,440 cells |
| Configurable Logic Blocks | 7,925 LABs/CLBs |
| Block RAM | 4,976,640 bits |
| User I/O | 210 I/O |
| Process Technology | 28 nm |
| Core Supply Voltage | 1 V |
| Encapsulado | 324-LFBGA CSPBGA, 324 balls |
| Device Family | Artix-7 XA |
| Speed Grade | -2 |
| Temperature Grade | Industrial |
| Tipo de montaje | Surface-mount BGA |
| AEC-Q100 Qualification | Qualified |
Guía de configuración de pines de XA7A100T-2CSG324I 324-lfbga cspbga, 324 balls
Configuración de pines para XA7A100T-2CSG324I (encapsulado 324-lfbga cspbga, 324 balls). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para XA7A100T-2CSG324I.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
XA7A100T-2CSG324I es adecuado para 6 aplicacións: Industrial Motion Control, Machine Vision Preprocessing, Communications Protocol Bridging, Test and Measurement Instrumentation, High-Speed Data Acquisition, Embedded Control and Networking.
Industrial Motion Control
The XA7A100T-2CSG324I fits industrial motion controllers because its 101,440 logic cells and 210 I/O can host several deterministic control channels in parallel. A practical architecture would allocate logic for encoder capture, motion sequencing, and safety monitoring while using the 4,976,640 RAM bits for trajectory and position-history buffering. The -2 industrial performance grade is appropriate for a design requiring repeatable timing behavior, although every external clock, isolation boundary, and actuator interface must be validated against the industrial operating environment. The compact 324-LFBGA package also helps reduce controller size, but its fine pitch requires careful layer design, decoupling, and assembly planning.
Recomendado
Machine Vision Preprocessing
The XA7A100T-2CSG324I is suitable for machine-vision preprocessing where parallel pixel streams must be filtered, thresholded, segmented, or converted between interface formats before reaching a processor. Its 101,440 logic cells support wide parallel datapaths, while 4,976,640 RAM bits can provide line buffers and multi-frame working storage. The 210 user I/O allow camera and interface logic to be placed close to the FPGA without excessive routing congestion. Designers should budget pipeline registers for clock-rate matching and use the AMD device timing tools to verify setup and hold timing for each selected I/O bank and clock domain.
Recomendado
Communications Protocol Bridging
The XA7A100T-2CSG324I can bridge dissimilar communication formats by terminating multiple streams, translating packet formats, and adding timing or routing logic in parallel. The 101,440-cell fabric can support several independent protocol engines, while the 4,976,640 RAM bits accommodate packet FIFOs and frame buffering. Its 210 I/O provide substantial connectivity for parallel buses, serial transceivers, status signals, and synchronization. A production implementation should isolate the fabric between clock domains, constrain every high-speed interface with appropriate timing exceptions, and verify electrical standards, termination, and impedance against the target board stack-up.
Recomendado
Test and Measurement Instrumentation
The XA7A100T-2CSG324I is well suited to parallel test and measurement systems that must acquire many channels, run calibration, and generate precisely timed outputs. The 101,440 logic cells support concurrent acquisition paths, digital pattern generation, and trigger processing, while the available RAM can store calibration tables and measurement records. With 210 user I/O, the device can combine data inputs, control outputs, and status signaling without relying on a processor for every timing-critical operation. The design must include clock jitter budgeting, input threshold strategy, calibration storage, and deterministic reset behavior so that results remain repeatable across power cycles and temperature conditions.
Recomendado
High-Speed Data Acquisition
The XA7A100T-2CSG324I can support high-speed data acquisition when parallel logic channels, substantial buffering, and programmable timing are needed. Its 101,440 logic cells allow multiple acquisition pipelines to run concurrently, while 4,976,640 RAM bits provide enough storage for short high-rate bursts, decimation stages, and control metadata. The 210-I/O device offers broad connectivity for ADC interfaces, parallel buses, and external clocks. For sustained operation, use the AMD pinout files to map dedicated clock and configuration pins correctly, apply bank-specific voltage rules, and confirm that the selected I/O standard and data rate are supported in the chosen package variant.
Recomendado
Embedded Control and Networking
The XA7A100T-2CSG324I fits embedded control platforms that combine network handling, local decision logic, and real-time peripheral coordination. Its programmable resources can implement packet processing, state machines, data aggregation, and hardware-assisted control without a rigid processor instruction sequence. The 4,976,640 RAM bits support protocol buffers and application state, while 210 I/O connect external sensors, memory, and communications devices. The -2 grade is suitable for industrial embedded systems, but the final design must verify boot configuration, clock stability, power sequencing, and watchdog recovery paths so a fault does not leave an industrial node in an undefined state.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para XA7A100T-2CSG324I — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | XC7A100T-2CSG324I | XC7A100T-2CSG324C | XC7A100T-1CSG324C | XA7A100T-1CSG324I | XA7A100T-1CSG324Q | XC7A75T-L1CSG324I |
|---|---|---|---|---|---|---|---|
| Package | 324-LFBGA CSPBGA | 324-LFBGA CSPBGA | 324-CSBGA | 324-CSBGA | 324-CSBGA | 324-CSBGA | 324-CSBGA |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD | AMD |
| FPGA Family | Artix-7 XA | Artix-7 | Artix-7 | Artix-7 | Artix-7 XA | Artix-7 XA | Artix-7 |
| Speed Grade | -2 | -2 | -2 | -1 | -1 | -1 | L1 |
| Temperature Qualification | Industrial | Industrial | Commercial | Commercial | Industrial | Q qualified | Industrial |
Diferenciadores clave
- Full 101,440-cell Artix-7 XA implementation (frente a XC7A75T-L1CSG324I)
- -2 industrial performance grade (frente a XC7A100T-1CSG324C)
- Industrial qualification aligned with controlled environments (frente a XC7A100T-2CSG324C)
- Wide parallel connectivity for FPGA-centric systems (frente a XC7A100T-1CSG324I)
Notas de diseño
Build the power tree directly from the AMD CSG324 package files and device power requirements. Separate core and I/O supply domains according to their permitted voltage combinations, place local high-frequency decoupling at each supply ball, and use plane transitions or orthogonal routing to minimize loop area. Confirm sequencing, voltage tolerance, and current margin with the selected package variant before releasing the PCB because the same 324-ball footprint can contain parts with different family resources.
Use the exact AMD CSG324 land pattern and pinout files rather than a generic 324-ball BGA footprint. Account for package orientation, ball map, solder-mask and paste design, thermal-via requirements, and board registration marks. Because the FPGA has 324 physical balls but only 210 user I/O, many balls are dedicated to power, ground, configuration, clocks, or other functions; every assignment must come from the exact device file.
An Artix-7 XA device can dissipate meaningful power in a dense 324-ball package even though its 28 nm process is efficient. Use the AMD power estimator with the actual design utilization, selected I/O standards, clock rates, and environmental assumptions. Spread heat through the BGA footprint and inner copper planes, then check junction-temperature margin against the selected -2 industrial temperature grade before defining the enclosure and airflow strategy.
Do not substitute solely by cell count and package suffix. Verify configuration behavior, supported I/O standards, bank voltage rules, pin assignments, speed grade, temperature qualification, and bitstream compatibility. A lower-density XC7A75T-L1CSG324I may use the same footprint but cannot reproduce a design that requires the target's full 101,440-cell capacity or -2 timing performance.
Información de cumplimiento
The product information identifies the XA7A100T-2CSG324I as AEC-Q100 qualified. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation.