XC3S1500-4FG456I - 1.5M Gate Spartan-3 FPGA | AMD
N.º de pieza: XC3S1500-4FG456I ✗ Fin de vidaXC3S1500-4FG456I Descripción general
A field-programmable gate array is a digital integrated circuit whose logic, interconnect, memory, and peripheral functions can be programmed after manufacture. Within the semiconductor hierarchy, an FPGA sits above fixed-function logic and below an ASIC when development flexibility, field updates, and configurable parallel processing are more important than maximum unit cost or lowest power consumption. The Spartan-3 family targets general-purpose embedded logic, control, communication, and signal-processing systems.
The XC3S1500 provides 29,952 logic cells, approximately 1.5 million equivalent system gates, 576 Kb of block RAM, and up to 333 user I/O. Its listed operating performance reaches 630 MHz, while its 1.2 V core voltage is suitable for modern FPGA board power architectures. The -4 suffix identifies the performance grade, FG456 identifies the 456-ball package, and the final I suffix denotes the industrial temperature option.
Internally, the device is organized around configurable logic and interconnect resources rather than a fixed processor pipeline. Parallel modules can execute control, filtering, protocol, or arithmetic functions simultaneously, allowing one FPGA to consolidate several discrete logic devices. Block RAM supports buffering and data storage without consuming large amounts of LUT-based logic, while dedicated multipliers accelerate selected arithmetic operations. This architecture favors flexible parallel datapaths over sequential general-purpose processing.
Typical uses include industrial control and automation, embedded communications, data acquisition, test equipment, video and image processing, network interface controllers, and embedded systems requiring parallel hardware acceleration. A design can assign interfaces and control functions to programmable I/O, use dedicated RAM for frame or packet buffering, and implement filters or protocol engines in parallel logic. The Spartan-3 architecture also supports field configuration updates when the system architecture permits controlled reconfiguration.
The primary PCB constraint is the 456-ball FBGA footprint, whose fine pitch, dense escape routing, and via requirements need careful stack-up and signal-integrity planning. Use the manufacturer pinout, differential-pair rules, and decoupling guidance when assigning pins and laying out power, ground, clock, and high-speed interfaces. Legacy tools and device support should also be checked before beginning a new design because the Spartan-3 generation predates current FPGA families.
This product record combines the exact device identity, package and logic-resource details, verified cross-reference candidates, and practical design guidance. It supports faster component identification while preserving the distinction between a genuine pin-compatible replacement and a device that merely belongs to the broader Spartan-3 family.
Alternativas directas para XC3S1500-4FG456I — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con XC3S1500-4FG456I (mismo factor de forma y huella) — difiere en Package, Process Technology, Speed Grade.
XC3S1500-4FG456C
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XC3S1500-4FG456L
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
XC3S1500-4FG456CL
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
XC3S1500-4FGG456C
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
XC3S1500-4FGG456I
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
XC3S1500-4FG456I Valores máximos y características eléctricas
| Device Type | Spartan-3 field-programmable gate array (FPGA) |
| System Gates | Approximately 1,500,000 gates |
| Logic Cells | 29,952 cells |
| Block RAM | 576 Kb |
| User I/O | 333 I/O |
| Maximum Performance Frequency | 630 MHz |
| Core Supply Voltage | 1.2 V |
| Process Technology | 90 nm |
| Encapsulado | 456-pin FBGA (FG456) |
| Package Dimensions | 23 mm x 23 mm |
| Tipo de montaje | Surface mount |
| Speed Grade | Grade -4 |
| Industrial Temperature Range | -40 °C to +100 °C junction |
| Programmable Logic | 29,952 configurable logic cells |
| Estado RoHS | unknown |
| REACH Status | unknown |
Guía de configuración de pines de XC3S1500-4FG456I 23 mm x 23 mm
Configuración de pines para XC3S1500-4FG456I (encapsulado 23 mm x 23 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para XC3S1500-4FG456I.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
XC3S1500-4FG456I es adecuado para 6 aplicacións: Industrial Automation Controller, Data Acquisition and Signal Processing, Embedded Communications Gateway, Video and Image Processing, Test and Measurement Equipment, Network Packet Processing.
Industrial Automation Controller
The XC3S1500-4FG456I fits industrial automation because its 29,952 logic cells can implement multiple machine-control functions in parallel, while 333 I/O support encoders, sensors, actuators, communications, and discrete logic. The 1.2 V core reduces distribution complexity in modern control boards, and the industrial temperature designation supports operation from -40 °C to +100 °C junction. A typical design would assign deterministic control loops to configurable logic, use block RAM for trace and state buffers, and reserve differential I/O for noisy factory environments. Because the device uses a dense 456-ball FBGA, the PCB should provide controlled return paths, ample ground connectivity, and decoupling close to the power and ground balls.
Recomendado
Data Acquisition and Signal Processing
The XC3S1500-4FG456I is useful in parallel data-acquisition systems where filtering, correlation, triggering, and buffer management benefit from dedicated hardware rather than sequential software. Its 576 Kb of block RAM provides storage for sampled data and processing windows, while 29,952 logic cells can implement multiple filters or measurement channels concurrently. The listed 630 MHz device performance gives designers additional timing margin for clocked logic. A practical instrument might use programmable I/O for converter interfaces, dedicated logic for parallel filtering, and block RAM for ping-pong buffering. Clock and data routing must remain deterministic, while analog converter isolation and reference quality should be handled separately from the FPGA core and I/O supplies.
Recomendado
Embedded Communications Gateway
The XC3S1500-4FG456I can consolidate parallel protocol engines, packet buffers, and control logic in a legacy embedded communication gateway. Its 29,952 logic cells and 576 Kb of block RAM are well matched to segmented Ethernet, serial bridging, bus arbitration, and store-and-forward tasks, while 333 I/O provide substantial connectivity to transceivers and control peripherals. The programmable architecture permits multiple channels to operate concurrently instead of forcing all traffic through a single state machine. For a new product, a current FPGA family is generally preferable; for an existing Spartan-3 design, however, the -4 grade and industrial-temperature option provide substantial timing and environmental headroom when the original controller must be replicated.
Recomendado
Video and Image Processing
The XC3S1500-4FG456I supports parallel image-processing pipelines using configurable logic for pixel operations and block RAM for line or frame buffers. Its 333 I/O can accommodate parallel sensors or converted video streams, and the 29,952 logic cells allow several filters or stages to operate concurrently. A typical camera or imaging controller could use programmable I/O for synchronization and data capture, dedicated logic for color conversion or thresholding, and RAM for double buffering. The 456-ball FBGA supports fine-pitch routing but requires careful ball-escape planning, uninterrupted supply planes, and impedance-controlled signal paths. For new high-resolution video systems, current devices offer substantially greater resources, efficiency, and tooling support, so this device is primarily suited to maintaining an established Spartan-3 platform.
Recomendado
Test and Measurement Equipment
The XC3S1500-4FG456I is appropriate for legacy test and measurement equipment that needs parallel stimulus generation, pattern processing, timing control, and data capture in one programmable device. Its configurable logic can operate several test channels concurrently, 576 Kb of block RAM can hold vectors and results, and the 333 I/O provide extensive connectivity to instruments and fixture hardware. The listed 630 MHz performance is useful for timing-critical pattern generation, while the industrial grade supports wider deployment environments. A practical implementation should constrain critical paths, use dedicated clock-capable pins where required, and separate analog measurement circuitry from digital routing. For new laboratory platforms, newer FPGA families should be evaluated for better resource density, power performance, and ongoing software-tool support.
Recomendado
Network Packet Processing
The XC3S1500-4FG456I can implement parallel packet classification, header inspection, traffic shaping, and buffer-management functions for a dedicated network interface. Its 29,952 logic cells support concurrent paths through the packet header, while 576 Kb of block RAM can absorb short packet bursts and support queueing. Up to 333 I/O accommodate parallel bus interfaces or multiple narrow channels, and the -4 speed grade provides a useful timing margin for legacy designs. A practical implementation would use clock-capable inputs, constrain the critical receive and transmit paths, and maintain continuous return paths beneath high-speed routing. Because the device is obsolete, engineers should use it for product maintenance and compatible redesigns rather than assume that a current FPGA will offer direct software or pin compatibility.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para XC3S1500-4FG456I — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | XC3S1500-4FG456C | XC3S1500-4FG456L | XC3S1500-4FG456CL | XC3S1500-4FGG456C | XC3S1500-4FGG456I |
|---|---|---|---|---|---|---|
| Package | 456-pin FBGA (FG456) | 456-pin FBGA (FG456) | 456-pin FBGA (FG456) | 456-pin FBGA (FG456) | 456-pin FBGA (FG456) | 456-pin FBGA (FG456) |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| FPGA Family | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3 |
| Logic Cells | 29,952 cells | 29,952 cells | 29,952 cells | 29,952 cells | 29,952 cells | 29,952 cells |
| System Gates | Approximately 1,500,000 gates | Approximately 1,500,000 gates | Approximately 1,500,000 gates | Approximately 1,500,000 gates | Approximately 1,500,000 gates | Approximately 1,500,000 gates |
| Block RAM | 576 Kb | 576 Kb | 576 Kb | 576 Kb | 576 Kb | 576 Kb |
| User I/O | 333 I/O | 333 I/O | 333 I/O | 333 I/O | 333 I/O | 333 I/O |
| Core Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Performance Grade | -4 | -4 | -4 | -4 | -4 | -4 |
| Temperature Grade | Industrial | Commercial | Legacy extended-temperature grade | Legacy commercial and extended-temperature grade | Commercial | Industrial |
Diferenciadores clave
- Maintains the full XC3S1500 resource profile (frente a XC3S1500-4FG456C)
- Uses the same 456-ball board footprint (frente a XC3S1500-4FGG456I)
- Provides substantially more capacity than a smaller Spartan-3 comparison device (frente a XC3S1000-4FGG456I)
Notas de diseño
Treat the 456-ball FBGA as a high-density routing problem. Define the PCB stack-up and impedance targets before assigning the 1.2 V core, auxiliary I/O supplies, clock inputs, and high-speed interfaces. Use the manufacturer ball map to route each signal to the correct BGA location, maintain uninterrupted reference planes where practical, and provide short supply and ground connections through dedicated via arrays. Validate escape-routing geometry and via current capacity with the PCB fabricator before releasing the layout.
Separate the 1.2 V core rail from the I/O supply requirements in the power tree. Place bulk and high-frequency decoupling capacitors close to the associated package balls, with additional decoupling distributed around the device for high fan-out switching loads. Validate voltage sequencing against the device configuration and I/O constraints. Estimated: if the design assumes 2.0 A total dynamic current at a 1.2 V core, the ideal core supply power is 2.4 W; actual input power will be higher after allowing for conversion and regulator losses.
Use clock-capable pins for system and high-speed clocks, constrain all timing-critical paths, and maintain controlled rise and fall times at the FPGA boundary. Differential interfaces require matched length and impedance according to the manufacturer pinout and board-design guidance. Avoid routing memory or bus signals through power-plane splits, and keep switching I/O away from sensitive clock and configuration nets. Validate the final design with post-route timing analysis and board-level signal-integrity simulation where clock rates or edge rates are high.
Do not assume that every XC3S1500 suffix is interchangeable. The FG456 and FGG456 markings both use the same 456-ball footprint, but temperature qualifications differ among I, C, L, and CL variants. The FGG676 option is not package-compatible because it uses 676 balls. Before substitution, compare the complete ordering code, inspect the manufacturer pin table, confirm that the replacement supports the required I/O standards and temperature range, and verify that the existing configuration bitstream remains valid.
Información de cumplimiento
No definitive compliance declaration for the exact XC3S1500-4FG456I was identified. AEC-Q100 is not applicable because this is an FPGA rather than an automotive-qualified discrete semiconductor.