XC3S5000-5FGG676C - 5M Gate Spartan-3 FPGA | AMD Xilinx
N.º de pieza: XC3S5000-5FGG676C ✗ Fin de vidaXC3S5000-5FGG676C Descripción general
An FPGA is a configurable semiconductor whose logic, interconnect, and I/O resources can be programmed after manufacture. Within the programmable-logic hierarchy, the Spartan-3 FPGA combines dense logic fabric, block RAM, dedicated multipliers, and programmable I/O. This makes the XC3S5000 suitable for embedded systems requiring considerable parallelism without the complexity or cost of a larger application-specific integrated circuit.
The XC3S5000-5FGG676C provides 74,880 logic cells in a 5 million system-gate Spartan-3 device and is identified with a speed grade of 5. Its 676-pin FBGA package supports a high pin count and dense board-level integration, while the commercial temperature range extends from 0°C to 85°C. The lead-free package designation makes it suitable for modern production boards with controlled environmental and assembly requirements.
Spartan-3 devices combine configurable logic, dedicated arithmetic resources, block RAM, and digital I/O in one programmable device. The device family supports high-throughput parallel processing, protocol bridging, data acquisition, control logic, and embedded display or communication interfaces. Exact I/O counts, supported memory interfaces, clock resources, and configuration limits should be confirmed against the relevant Spartan-3 family documentation before a new board is released.
Typical applications include industrial control systems, data-acquisition equipment, video-processing pipelines, communications infrastructure, instrumentation, and high-density embedded peripherals. The 676-ball package is most appropriate for multilayer PCB layouts where fine-pitch routing, via density, thermal management, and assembly capability are already established.
When planning the PCB, allocate all 676 balls in the package symbol, including power, ground, configuration, and unused balls. Check the exact Spartan-3 package pinout, differential-pair rules, supply decoupling requirements, and FPGA configuration interface before fabrication. Validate the assembled board with the intended bitstream and operating conditions rather than relying only on simulation results.
This product page combines the published device identity, package, capacity, speed, voltage, and temperature information with engineering-oriented selection guidance and qualified cross-reference notes. It also emphasizes why a visually similar package designation is not enough to qualify an FPGA substitution: configuration compatibility, supported I/O, speed grade, lifecycle status, and the exact manufacturer part number must all be reviewed before replacement.
Alternativas directas para XC3S5000-5FGG676C — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con XC3S5000-5FGG676C (mismo factor de forma y huella) — difiere en Device Type.
XC3S5000-5FG676C
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XC3S5000-5FGG676C-ND
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
XC3S5000-5FGG676C Valores máximos y características eléctricas
| Device Type | Spartan-3 field-programmable gate array (FPGA) |
| System Gates | 5,000,000 gates |
| Logic Cells | 74,880 cells |
| FPGA Family | Spartan-3 |
| Process Technology | 90 nm |
| Core Supply Voltage | 1.2 V |
| Speed Grade | 5 |
| Frecuencia de reloj máxima | 725 MHz |
| Package Type | 676-pin fine-pitch ball grid array (FBGA) |
| Total Package Pins | 676 pins |
| Temperatura de funcionamiento | 0°C to 85°C |
| Tipo de montaje | Surface mount |
| Lead-Free Status | Lead free |
| Programmable Logic Type | SRAM-configurable FPGA |
| Manufacturer | AMD Xilinx |
Guía de configuración de pines de XC3S5000-5FGG676C 676 pins
Configuración de pines para XC3S5000-5FGG676C (encapsulado 676 pins). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para XC3S5000-5FGG676C.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
XC3S5000-5FGG676C es adecuado para 6 aplicacións: Industrial Control and Automation, Data Acquisition and Instrumentation, Communications and Protocol Bridging, Video and Image Processing, Embedded Audio Processing, High-Density Programmable Logic Platform.
Industrial Control and Automation
The XC3S5000-5FGG676C fits industrial control systems that require parallel logic, state-machine processing, and programmable I/O on one device. Its 74,880 logic cells provide substantial capacity for sequencing, interlocks, counters, data validation, and communication control, while the 676-pin FBGA exposes the full device interface set. The device uses a 1.2 V core supply, so the design should separate core and I/O supply planes and validate every external voltage standard. Although the published operating range is 0°C to 85°C, enclosure temperature, power dissipation, and system reliability must be evaluated for the installation environment.
Recomendado
Data Acquisition and Instrumentation
The XC3S5000-5FGG676C is suitable for coordinating parallel ADC capture, digital filtering, trigger logic, calibration tables, and data packaging. Its 74,880 logic cells allow multiple acquisition channels and supporting control functions to share one FPGA, while dedicated Spartan-3 resources can accelerate fixed arithmetic operations. The 676-ball FBGA provides extensive I/O access but demands a multilayer PCB with careful routing. Confirm pin constraints, supported I/O standards, clock topology, and acquisition timing against the manufacturer documentation. Use the on-chip RAM only after accounting for widths, depth, and inferred-clock performance.
Recomendado
Communications and Protocol Bridging
The XC3S5000-5FGG676C can implement parallel protocol conversion, packetization, clock-domain isolation, and interface bridging because 74,880 logic cells provide substantial configurable throughput. The 5 million system-gate Spartan-3 family is particularly useful when several finite-state machines and buffers must operate concurrently. The 676-pin FBGA exposes many differential and single-ended I/O resources, but each interface must be checked for voltage tolerance and bank constraints. Engineers should budget logic for framing, error recovery, buffering, and flow control instead of reserving all cells for the primary datapath.
Recomendado
Video and Image Processing
The XC3S5000-5FGG676C can support parallel pixel pipelines, line buffers, color processing, synchronization, and interface adapters in cost-sensitive embedded video systems. Its 74,880 logic cells and dedicated multiplier resources allow several stages of filtering or scaling to be implemented concurrently, while the 676-pin FBGA provides enough external connections for wide buses and multiple video interfaces. Actual video throughput depends on pixel format, resolution, memory mapping, and timing closure. Confirm supported I/O standards and external memory requirements in the Spartan-3 documentation, and validate timing at the intended clock frequencies.
Recomendado
Embedded Audio Processing
The XC3S5000-5FGG676C can serve as the control and signal-routing element in embedded audio equipment, implementing sample-rate conversion coordination, filtering, mixing control, and digital interface adaptation. Its large logic capacity allows audio streams and control logic to coexist without using a separate microcontroller for every routine task. The 1.2 V core supply requires a stable low-noise rail, and the 676-ball package requires deliberate decoupling and return-path planning. For clock-synchronous interfaces, constrain input and output timing carefully and test the complete design under the required sample rate and channel count.
Recomendado
High-Density Programmable Logic Platform
The XC3S5000-5FGG676C is useful as a general-purpose logic platform for legacy products that need high pin count, substantial parallelism, and deterministic configurable behavior. Its 5 million system gates and 74,880 logic cells support elaborate control architectures, lookup-based algorithms, and multiple peripheral blocks within one device. The 676-pin FBGA is appropriate only where a board team can manufacture and inspect fine-pitch assemblies with controlled build quality. Plan decoupling, configuration storage or programming access, clock distribution, and test access early in the PCB layout to avoid last-stage redesigns.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para XC3S5000-5FGG676C — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | XC3S5000-5FG676C | XC3S5000-5FGG676C-ND |
|---|---|---|---|
| Brand | AMD | AMD | AMD |
| Package | 676-pin FBGA | 676-pin FBGA | 676-pin FBGA |
| FPGA Family | Spartan-3 | Spartan-3 | Spartan-3 |
| System Gates | 5,000,000 gates | 5,000,000 gates | 5,000,000 gates |
| Logic Cells | 74,880 cells | 74,880 cells | 74,880 cells |
| Process Technology | 90 nm | 90 nm | 90 nm |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V |
| Speed Grade | 5 | 5 | 5 |
Diferenciadores clave
- Exact 5 million system-gate Spartan-3 configuration (frente a XC3S5000-5FG676C)
- Established 90 nm, 1.2 V architecture (frente a XC3S5000-5FGG676C-ND)
- High-density 676-ball FBGA integration (frente a XC3S5000-5FG676C)
Notas de diseño
Use the manufacturer 676-ball FBGA land pattern and complete ball map rather than creating a symbol from the package name alone. Reserve every power and ground ball, connect unused balls according to the package guidance, and route high-speed differential pairs with controlled length and impedance. A multilayer PCB is generally necessary because dense escape routing and multiple supply domains cannot be implemented reliably on a simple two-layer board.
Separate the 1.2 V core rail from any other voltage domain and follow the manufacturer guidance for decoupling, regulator selection, and power sequencing. Place bulk and high-frequency capacitors close to the relevant supply and ground balls, with very short return paths. Confirm startup current, I/O current, and the worst-case power budget because legacy FPGA designs often overlook simultaneous I/O loading when selecting supplies.
Assign clock inputs and configuration signals before routing general user I/O, and keep configuration lines away from noisy switching nodes. Follow the manufacturer guidance for dedicated configuration pins, JTAG or other programming access, and startup behavior. Validate bitstream loading on the intended board because a functionally correct design can still fail during configuration if signal integrity, voltage levels, or pin constraints are incorrect.
Do not treat XC3S5000-5FG676C or XC3S5000-5FGG676C-ND as automatic substitutions without checking the official ordering information, package drawing, speed grade, temperature grade, and configuration compatibility. The suffix changes can carry ordering or commercial-status meaning even when the logic-cell count and FBGA format match. Also confirm that the installed ISE toolchain supports the exact device and produces the required configuration bitstream.
Información de cumplimiento
The published component listing identifies the package as lead free. Specific RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals declarations were not identified and require confirmation from the manufacturer or authorized supply documentation.