XC4VLX15-10SFG363I - Virtex-4 LX FPGA | AMD Xilinx
N.º de pieza: XC4VLX15-10SFG363I ✗ Fin de vidaXC4VLX15-10SFG363I Descripción general
A field-programmable gate array is a semiconductor device whose digital logic, interconnect, and dedicated hardware blocks are configured after manufacture. The Virtex-4 LX platform belongs to the FPGA hierarchy, where an FPGA combines configurable logic, block RAM, programmable I/O, dedicated arithmetic resources, and parallel processing in one device. This integration allows a system designer to implement control, datapath, interface, and protocol functions without using a fixed-function ASIC.
The XC4VLX15-10SFG363I provides 13,824 logic cells and 240 I/O, making it suitable for designs requiring substantial parallel logic and broad external connectivity. Its -10 speed designation identifies the performance grade, while the G suffix denotes the industrial-temperature option. The package data identifies RoHS compliance and lead-free construction. Dedicated FPGA resources also make the device relevant to parallel data acquisition, signal processing, communications, industrial control, and embedded accelerator workloads.
The 90 nm Virtex-4 LX implementation balances programmable functionality with relatively high-density logic integration. In a design, the FPGA fabric can execute parallel pipelines or state machines while block RAM buffers samples and I/O banks connect the device to external interfaces. Configuration determines the final circuit, but the physical design still requires correct power sequencing, clocking, decoupling, configuration-memory connection, and signal-integrity control to achieve reliable operation.
Typical uses include industrial automation controllers, communications equipment, data-acquisition systems, test and measurement platforms, embedded signal processors, and control systems with numerous external connections. The 240 I/O count is especially valuable when a design must bridge multiple buses, capture parallel data, drive displays, or interface with external converters and memories. Parallel workloads can also exploit the FPGA fabric more effectively than a sequential microcontroller architecture.
For layout, follow the manufacturer’s pinout, power-decoupling, and ball-assignment instructions exactly because FCBGA routing and configuration requirements are package-specific. Place bypass capacitors close to the relevant supply balls, provide a low-impedance ground reference, and validate high-speed interfaces with controlled impedance. Because configuration and startup behavior are integral to FPGA operation, review the device programming guidance before releasing the board layout.
This page combines the principal device characteristics, package-specific sourcing information, drop-in ordering alternatives, application guidance, and engineering design notes. It also distinguishes temperature and speed-grade variants so engineers can identify a valid replacement without confusing a different package or functional implementation with a true board-level substitute.
Alternativas directas para XC4VLX15-10SFG363I — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con XC4VLX15-10SFG363I (mismo factor de forma y huella) — difiere en Package, Speed Grade, Architecture, Device Type.
XC4VLX15-10SFG363C
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →XC4VLX15-12SFG363I
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
XC4VLX15-9SFG363I
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
XC4VLX15-8SFG363I
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
XC4VLX15-7SFG363I
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
XC4VLX15-10SFG363I Valores máximos y características eléctricas
| FPGA Family | Virtex-4 LX |
| Logic Cells | 13,824 cells |
| User I/O | 240 I/O |
| Speed Grade | 10 |
| Encapsulado | 363-pin FCBGA (SFG) |
| FPGA Technology | 90 nm |
| Core Supply Voltage | 1.2 V |
| Industrial Temperature Range | -40°C to 100°C junction |
| Tipo de montaje | Surface mount |
| Lead-Free Status | Lead free |
| Estado RoHS | RoHS compliant |
| Architecture | ASMBL architecture |
Guía de configuración de pines de XC4VLX15-10SFG363I 363-pin fcbga (sfg)
Configuración de pines para XC4VLX15-10SFG363I (encapsulado 363-pin fcbga (sfg)). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para XC4VLX15-10SFG363I.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
XC4VLX15-10SFG363I es adecuado para 6 aplicacións: Industrial Data-Acquisition Systems, Communications Line-Card Control, FPGA-Based Signal Processing, Test and Measurement Instrumentation, Industrial Automation and Motion Control, Embedded Parallel Processing.
Industrial Data-Acquisition Systems
The XC4VLX15-10SFG363I fits multichannel acquisition systems that must sample, filter, and format several data streams in parallel. Its 13,824 logic cells support substantial pipelining and control logic, while 240 user I/O provide connections to converters, sensors, memory, clocks, and isolation devices. The 10 speed grade supports higher clock rates than lower-grade family members when timing margins permit. For an industrial enclosure, the -40°C to 100°C junction specification is relevant, but designers must still verify ambient temperature, airflow, board copper, and supply stability against the complete power budget.
Communications Line-Card Control
The Virtex-4 LX FPGA can implement protocol engines, packet classifiers, timing controllers, and parallel data paths within one communications line card. The XC4VLX15-10SFG363I provides 13,824 logic cells and 240 I/O, allowing multiple narrow interfaces and a centralized control plane to coexist without relying on several discrete logic devices. Its 10 speed grade can improve timing margin in moderately fast packet-processing paths. Board-level use requires controlled clock distribution, terminated transmission lines, and careful separation between sensitive configuration signals and high-speed data paths.
FPGA-Based Signal Processing
The XC4VLX15-10SFG363I is suitable for digital filtering, waveform transformation, correlation, and other parallel signal-processing pipelines. Its 13,824 logic cells allow multiple arithmetic operations to execute concurrently, while 240 I/O provide sufficient bandwidth for parallel converters, memory interfaces, and test ports. The 10 speed grade offers a useful balance between throughput and power when the design is not timing-critical. Designers should use registered pipeline stages, device-aware timing constraints, and synchronous interfaces to prevent combinational routing from limiting the intended sampling or processing rate.
Test and Measurement Instrumentation
The XC4VLX15-10SFG363I can coordinate acquisition, triggering, calibration, and result processing inside modular test equipment. Its 240 user I/O are valuable for synchronizing multiple instruments, driving display and control interfaces, and connecting to precision converters. The 13,824 logic cells permit real-time measurement pipelines to run in parallel rather than relying on a single processor task. The -40°C to 100°C industrial junction range supports controlled laboratory or industrial environments, although precision analog accuracy is determined mainly by external references, converters, clock sources, and calibration.
Industrial Automation and Motion Control
The XC4VLX15-10SFG363I is appropriate for machine controllers that must combine deterministic logic, parallel I/O, and embedded protocol handling. Its 240 I/O can connect digital encoders, actuator drivers, safety-oriented discrete signals, and field-bus transceivers, while 13,824 logic cells support state machines and real-time motion pipelines. The 10 speed grade can help close timing on faster control loops. In a motor or machine application, separate analog and digital power sections, grounded return paths, and careful isolation design are as important as the FPGA timing closure itself.
Embedded Parallel Processing
The XC4VLX15-10SFG363I can serve as a dedicated accelerator when a control processor requires deterministic parallel work. Video preprocessing, packet analysis, table lookups, or custom filtering can be distributed across the FPGA’s 13,824 logic cells, while 240 I/O connect the accelerator to host processors and external memories. The 10 speed grade helps sustain moderately clocked pipelines, and the industrial temperature option supports equipment operating beyond typical commercial conditions. A practical implementation should define the host-to-FPGA interface, buffering strategy, interrupt behavior, and clock-reset scheme before optimizing fabric utilization.
Datos de referencia de ingeniería para XC4VLX15-10SFG363I — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | XC4VLX15-10SFG363C | XC4VLX15-12SFG363I | XC4VLX15-9SFG363I | XC4VLX15-8SFG363I | XC4VLX15-7SFG363I |
|---|---|---|---|---|---|---|
| Brand | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx |
| Package | 363-pin FCBGA (SFG) | 363-pin FCBGA (SFG) | 363-pin FCBGA (SFG) | 363-pin FCBGA (SFG) | 363-pin FCBGA (SFG) | 363-pin FCBGA (SFG) |
| FPGA Family | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX |
| Logic Cells | 13,824 cells | 13,824 cells | 13,824 cells | 13,824 cells | 13,824 cells | 13,824 cells |
| User I/O | 240 I/O | 240 I/O | 240 I/O | 240 I/O | 240 I/O | 240 I/O |
| Speed Grade | 10 | 10 | 12 | 9 | 8 | 7 |
| FPGA Technology | 90 nm | 90 nm | 90 nm | 90 nm | 90 nm | 90 nm |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Temperature Suffix | G industrial grade | C commercial grade | G industrial grade | G industrial grade | G industrial grade | G industrial grade |
Diferenciadores clave
- Matches the closest same-package commercial-temperature ordering code (frente a XC4VLX15-10SFG363C)
- Uses the familiar 10 speed grade rather than the 12 grade (frente a XC4VLX15-12SFG363I)
- Provides more timing grade than the 8 grade option (frente a XC4VLX15-8SFG363I)
- Maintains higher speed grade than the 7 grade option (frente a XC4VLX15-7SFG363I)
Notas de diseño
Use the manufacturer power specification for the selected XC4VLX15 configuration and follow its supply-sequencing diagram exactly. The device uses a 1.2 V core supply, but peripheral I/O supplies and configuration rails may have separate ramp requirements. Place the prescribed bypass capacitors at the nearest compatible power balls, provide uninterrupted ground planes, and avoid sharing narrow supply paths with switching converters or motors. Validate droop, ripple, and startup behavior with the highest expected I/O activity because dynamic current can be much higher than the idle-state estimate.
Treat the 363-pin FCBGA assignment as a complete electrical and mechanical constraint. Route power and ground on dedicated layers, use short vertical connections where the package design calls for them, and maintain the prescribed ball-pad geometry. Configuration pins, JTAG, clock inputs, and user I/O must follow the official pinout table rather than a generic FCBGA drawing. Before fabrication, compare the CAD component, pad map, and assembly drawing against the exact SFG package and include appropriate assembly and inspection controls.
Drive clock and high-speed interface signals through controlled-impedance structures, and keep configuration and programming nets away from noisy switching nodes where practical. The 240 I/O can support many interfaces, but simultaneous switching may increase current transients and coupling between adjacent balls. Use the manufacturer I/O guidance to select suitable standards and terminations, route sensitive signals over continuous reference planes, and reserve test points that do not disturb edge rates. Validate the final stack-up and routing with the selected Vivado implementation constraints.
Do not approve a substitute solely because it has 363 balls and the XC4VLX15 family name. The speed grade changes timing margin and potentially power behavior, while the G and C suffixes change the temperature range. A valid board-level substitution must preserve the configuration architecture, pin functions, supply requirements, I/O standards, and acceptable operating environment. Re-run synthesis, implementation, timing analysis, and board checks after changing the exact device part, even when the package and logic-cell count remain unchanged.
Información de cumplimiento
RoHS-compliant and lead-free status are identified for the exact part. No REACH, halogen-free, conflict-minerals, or automotive qualification statement is provided for this ordering code.