XC9572XL-7VQG64C - 72-Macrocell 3.3V CPLD | AMD
N.º de pieza: XC9572XL-7VQG64C ✗ Fin de vidaXC9572XL-7VQG64C Descripción general
A complex programmable logic device, or CPLD, is a programmable semiconductor that implements digital logic through a structured collection of macrocells and programmable interconnect. In the product hierarchy, a CPLD is a programmable logic device, a type of semiconductor and a practical alternative to small gate arrays. Its nonvolatile configuration allows the implemented logic to remain in the device after power is removed, which is useful for control, decoding, interface, and glue-logic designs.
The XC9572XL provides 72 macrocells organized into four logic-element or function-block groups. This architecture supports compact state machines, bus arbitration, address decoding, protocol translation, and general-purpose control logic. The -7 speed designation corresponds to a 7.5 ns maximum propagation delay, while the device is specified at 3.3 V. In-system programmability supports configuration updates without removing the device, and the XC9500XL architecture supports a minimum of 10,000 program or erase cycles.
The XC9572XL uses a flash-based, reprogrammable configuration approach rather than volatile SRAM configuration. Its macrocell-based structure provides predictable timing through fixed product-term paths and programmable interconnect. With 52 user I/O pins in the 64-pin package, the device can support substantial mixed logic and external interface requirements while remaining smaller than a large FPGA.
Typical applications include industrial control and automation, legacy peripheral emulation, communication interface logic, display and video control, embedded boot and sequencing logic, and compact glue-logic subsystems. The XC9500XL family is particularly relevant to designs that need nonvolatile logic and in-system updates but do not require the resources or complexity of a larger FPGA.
PCB implementation requires careful review of the manufacturer's pin descriptions, supply connections, configuration interface, and unused-pin treatment. The 64-pin package has fine-pitch leads, so trace geometry, solder-paste volume, and thermal or power distribution should be checked against the package drawing and board-fabrication capabilities. Confirm compatibility with the active design toolchain before starting a new design.
This page combines the device architecture, timing and I/O characteristics with package-aware alternatives, application guidance, and practical design notes. It is intended to support engineering selection while preserving the distinction between a true pin-compatible alternative and a device that merely belongs to the same broader CPLD category.
Alternativas directas para XC9572XL-7VQG64C — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con XC9572XL-7VQG64C (mismo factor de forma y huella) — difiere en Package, Usable Gates, Device Type, Speed Grade, Boundary Scan.
XC9572XL-7VQG64I
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
XC9572XL-7VQ64C
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →XC9572XL-7VQ64I
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XC9572XL-10VQG64C
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →XC9572XL-10VQG64I
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
XC9572XL-7VQG64C Valores máximos y características eléctricas
| Device Type | Complex programmable logic device (CPLD) |
| Product Family | XC9500XL |
| Macrocell Count | 72 macrocells |
| Usable Gate Count | 1,600 gates |
| Logic Element or Function Block Count | 4 blocks |
| User I/O Count | 52 user I/O pins |
| Maximum Propagation Delay | 7.5 ns |
| Frecuencia de reloj máxima | 125 MHz |
| Tensión de alimentación | 3.3 V |
| Programming Type | In-system programmable |
| Configuration Memory | Flash |
| Minimum Program or Erase Endurance | 10,000 cycles |
| Process Technology | 0.35 µm CMOS |
| Rango de temperatura de funcionamiento | 0°C to 70°C |
| Encapsulado | 64-pin TQFP |
| Tipo de montaje | Surface mount |
| Shipping Package | Tray |
Guía de configuración de pines de XC9572XL-7VQG64C tray
Configuración de pines para XC9572XL-7VQG64C (encapsulado tray). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para XC9572XL-7VQG64C.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
XC9572XL-7VQG64C es adecuado para 6 aplicacións: Industrial Control and Automation, Peripheral Interface and Protocol Bridging, Display and Video Control Logic, Embedded System Sequencing and Glue Logic, Communication Interface Consolidation, Legacy Peripheral Emulation.
Industrial Control and Automation
The XC9572XL-7VQG64C suits compact control logic because its 72 macrocells and 1,600 usable gates can implement state machines, interlocks, sequencing, and discrete control functions. The 52 user I/O pins provide useful connectivity for sensors, actuators, and machine-interface signals without requiring a large FPGA. A 7.5 ns maximum propagation delay supports moderate-speed logic, while 3.3 V operation aligns with modern industrial peripherals. The commercial 0°C to 70°C rating should be checked against the cabinet environment; use the industrial suffix when wider temperature operation is required.
Peripheral Interface and Protocol Bridging
The XC9572XL-7VQG64C can serve as a deterministic interface controller when a system must translate or qualify signals between mismatched peripherals. Its macrocell-based interconnect supports fixed logic structures such as command decoding, FIFO-like control, interrupt arbitration, and state sequencing. Fifty-two user I/O pins allow multiple buses or parallel interfaces to share the device. Because the part is legacy flash-programmable logic, confirm signal standards, voltage compatibility, and supported I/O modes against DS057 before using it where a newer CPLD would provide a longer product-life path.
Display and Video Control Logic
The XC9572XL-7VQG64C is appropriate for legacy display and video designs requiring compact timing, positioning, routing, and control logic rather than a large programmable video pipeline. Its 72 macrocells can consolidate synchronization, blanking, cursor, overlay, and status functions, while 1,600 usable gates provide moderate design capacity. The 7.5 ns propagation delay can support short combinational control paths and moderate clock-domain logic. Validate horizontal and vertical timing margins, I/O standards, and synchronization requirements with the system simulator and the timing information in DS057.
Embedded System Sequencing and Glue Logic
The XC9572XL-7VQG64C is useful as nonvolatile glue logic between processors, memories, and peripheral devices. Typical functions include reset sequencing, interrupt routing, address decode, watchdog control, boot arbitration, and power-state coordination. Seventy-two macrocells and 52 I/O pins give an existing board a meaningful amount of programmable logic without expanding to a large FPGA. In-system programming allows updates without removing the device, and flash configuration preserves the implemented logic across power cycles. Keep the programming interface accessible and include a recovery strategy for field configuration updates.
Communication Interface Consolidation
The XC9572XL-7VQG64C can consolidate protocol framing, command parsing, flow control, and status decoding in communication equipment built around the XC9500XL architecture. Its fixed macrocell structure provides repeatable implementation of parallel and low-speed serial interface logic, while 52 user I/O pins support transceiver connections and control signals. A 7.5 ns maximum delay is appropriate for many control and framing paths, although the exact protocol timing must be checked. For new high-speed or multi-protocol products, assess whether the legacy toolchain and device roadmap satisfy the full product lifecycle.
Legacy Peripheral Emulation
The XC9572XL-7VQG64C is a practical fit for emulating a discontinued peripheral or preserving an existing board revision that depends on its exact 64-pin footprint. Seventy-two macrocells can implement address decoding, register behavior, arbitration, and legacy handshake sequences, while the -7 grade provides 7.5 ns maximum propagation delay. The commercial-temperature suffix supports 0°C to 70°C operation. Before substitution, compare the replacement’s pin table, configuration protocol, timing constraints, and power behavior with the original schematic and DS057, rather than relying on package appearance alone.
Datos de referencia de ingeniería para XC9572XL-7VQG64C — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | XC9572XL-7VQG64I | XC9572XL-7VQ64C | XC9572XL-7VQ64I | XC9572XL-10VQG64C | XC9572XL-10VQG64I |
|---|---|---|---|---|---|---|
| Package | 64-pin TQFP | 64-pin TQFP | 64-pin TQFP | 64-pin TQFP | 64-pin TQFP | 64-pin TQFP |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Device Type | Flash-based in-system programmable CPLD | Flash-based in-system programmable CPLD | Flash-based in-system programmable CPLD | Flash-based in-system programmable CPLD | Flash-based in-system programmable CPLD | Flash-based in-system programmable CPLD |
| Macrocell Count | 72 macrocells | 72 macrocells | 72 macrocells | 72 macrocells | 72 macrocells | 72 macrocells |
| Usable Gate Count | 1,600 gates | 1,600 gates | 1,600 gates | 1,600 gates | 1,600 gates | 1,600 gates |
| User I/O Count | 52 user I/O pins | 52 user I/O pins | 52 user I/O pins | 52 user I/O pins | 52 user I/O pins | 52 user I/O pins |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Speed Grade | -7, 7.5 ns maximum propagation delay | -7, 7.5 ns maximum propagation delay | -7, 7.5 ns maximum propagation delay | -7, 7.5 ns maximum propagation delay | -10 speed grade, approximately 10 ns maximum propagation delay | -10 speed grade, approximately 10 ns maximum propagation delay |
| Temperature Grade | Commercial, 0°C to 70°C | Industrial | Commercial | Industrial | Commercial | Industrial |
Diferenciadores clave
- Commercial -7 timing class with a 64-pin controlled footprint (frente a XC9572XL-10VQG64C)
- Direct industrial-temperature path for footprint-preserving upgrades (frente a XC9572XL-7VQG64I)
- Nonvolatile flash configuration with in-system programmability (frente a XC9572XL-7VQ64C)
Notas de diseño
Follow the AMD DS057 package drawing and pin-description table when laying out the 64-pin TQFP. Keep configuration signals and clock inputs away from noisy switching nodes, provide a continuous return path beneath the device where the recommended layout permits, and route decoupling directly between the appropriate supply and ground pins. Treat all unused pins according to the datasheet rather than assigning them by analogy with another CPLD.
Do not treat the -7 and -10 order codes as equivalent without rerunning timing analysis. The -7 grade has a 7.5 ns maximum propagation delay, whereas the -10 grade is approximately 10 ns, about 33.3% slower. A design that closes timing with the original grade can fail with the slower device because combinational paths, setup windows, and external interface timing margins may no longer overlap.
The 64-pin fine-pitch TQFP requires PCB construction rules appropriate to its lead pitch and pad geometry. Verify copper pads against the current package drawing, define a paste mask appropriate for the component, and evaluate solder fillets with the assembly process. Program the device only after the assembly has passed the appropriate continuity, short, and cleanliness checks to avoid damaging the configuration interface.
Place the required supply and ground capacitors close to their associated pins, with the shortest possible current loops and a low-impedance ground reference. Because this is a 3.3 V legacy CPLD, avoid substituting supply pins from the package drawing without checking the exact suffix and revision of DS057. Validate the assembled rail under worst-case I/O activity because simultaneous output and configuration activity can produce dynamic-current peaks.
Información de cumplimiento
The available product information does not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements for this exact suffix.