XCKU035-1FBVA676I - 444343-Cell Kintex UltraScale FPGA | AMD
N.º de pieza: XCKU035-1FBVA676I ✓ ActivoXCKU035-1FBVA676I Descripción general
An FPGA is a semiconductor whose digital functionality is defined after manufacture through a configuration bitstream. The Kintex UltraScale family belongs to the broader programmable-logic hierarchy: FPGA, programmable-logic device, digital semiconductor, and integrated circuit. This architecture combines parallel programmable logic with dedicated DSP slices, block RAM, high-speed I/O, clocking resources, and serial transceivers, allowing one device to implement control, signal processing, connectivity, and hardware acceleration functions.
The XCKU035-1FBVA676I provides 1,700 DSP slices and 19,456 Kbits of block RAM alongside 444,343 logic cells. Its 312 user I/O support connections to external memory, data converters, network transceivers, and industrial peripherals. Sixteen GTH transceivers enable high-speed serial links, while the -1 speed designation identifies the device's performance grade within the Kintex UltraScale ordering system.
The 20 nm Kintex UltraScale implementation combines programmable logic fabric with dedicated arithmetic, memory, and transceiver resources. Its 676-pin FCBGA package provides a large, complex interconnect arrangement for power, ground, high-speed I/O, configuration, and general-purpose signals. Proper implementation therefore depends on the AMD package pinout, board power planning, decoupling, and high-speed layout guidance rather than generic BGA assumptions.
Typical applications include industrial automation, test and measurement, networking equipment, high-speed data acquisition, signal processing, embedded vision, and communications infrastructure. The combination of 1,700 DSP slices and 16 GTH transceivers makes the device particularly suitable when parallel processing and multi-gigabit serial communication must coexist in one FPGA package.
A key design consideration is power delivery. This high-pin-count FCBGA requires a dense multilayer PCB, numerous decoupling capacitors, carefully controlled power sequencing, and thermal analysis for the configured Kintex UltraScale device. Differential and high-speed routes also need compliant impedance-controlled stackups and return-path planning to prevent signal-integrity degradation.
This page consolidates device specifications, package information, same-footprint alternatives, application guidance, and engineering design notes into an implementation-oriented resource for engineers evaluating the XCKU035-1FBVA676I.
Alternativas directas para XCKU035-1FBVA676I — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con XCKU035-1FBVA676I (mismo factor de forma y huella) — difiere en Mounting Type, Logic Cells, Package, Speed Grade, Process Node.
XCKU035-2FBVA676I
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XCKU035-L1FBVA676I
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XCKU035-2FBVA676E
✅ Sustitución directaConsulte el precio
Ver hoja de datos →XCKU035-1FBVA676C
✅ Sustitución directa✓ En stock
$467.66 / unidad
Ver hoja de datos →XCKU035-2FBVA676C
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
XCKU035-1FBVA676I Valores máximos y características eléctricas
| Device Type | Kintex UltraScale FPGA |
| Logic Cells | 444343 cells |
| User I/O | 312 I/O |
| DSP Slices | 1700 slices |
| Block RAM | 19456 Kbits |
| GTH Transceivers | 16 transceivers |
| Process Technology | 20 nm |
| Core Supply Voltage | 0.95 V |
| Encapsulado | 676-pin FCBGA |
| Package Pin Count | 676 pins |
| Device Speed Grade | -1 |
| Temperature Grade | Industrial, -40 °C to +100 °C |
| Programmable Logic | FPGA |
| Transceiver Type | GTH |
| Tipo de montaje | Surface-mount FCBGA |
Guía de configuración de pines de XCKU035-1FBVA676I 676 pins
Configuración de pines para XCKU035-1FBVA676I (encapsulado 676 pins). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para XCKU035-1FBVA676I.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
XCKU035-1FBVA676I es adecuado para 6 aplicacións: Industrial Automation and Control, High-Speed Data Acquisition, High-Speed Communications, Test and Measurement, Embedded Vision and Signal Processing, Aerospace and Defense Systems.
Industrial Automation and Control
The XCKU035-1FBVA676I fits industrial controllers that combine deterministic parallel control with substantial data processing. Its 444,343 logic cells can implement multiple communication protocols, state machines, timing channels, and machine-control logic, while 1,700 DSP slices accelerate motion, signal, or sensor-processing workloads. The 312 I/O provide connections for encoders, sensors, actuators, and safety-related discrete signals. For equipment operating from -40 °C to +100 °C, the industrial-grade ordering code is relevant, although system validation must still cover vibration, power quality, thermal cycling, and functional safety requirements.
Recomendado
High-Speed Data Acquisition
The XCKU035-1FBVA676I is well suited to parallel and mixed-signal data-acquisition systems requiring programmable filtering, buffering, and digital signal processing. Its 1,700 DSP slices can implement decimation, correlation, FFT, and other fixed-point or floating-point pipelines, while 19,456 Kbits of block RAM can buffer samples between acquisition and processing stages. The 312 I/O support wide parallel buses and control signals. Engineers should select pin assignments carefully for timing-critical interfaces and verify that the selected memory and external interfaces meet the acquisition timing budget.
Recomendado
High-Speed Communications
The 16 GTH transceivers in the XCKU035-1FBVA676I enable compact multi-gigabit communication links within a single Kintex UltraScale package. A designer can implement endpoint logic, serialization, clocking, protocol framing, and data buffering without relying exclusively on discrete PHY devices. The 444,343 logic cells provide substantial parallelism for network aggregation, monitoring, and traffic processing, while 19,456 Kbits of block RAM supports packet buffering. PCB implementation must use the AMD-recommended transceiver and differential-routing rules to control insertion loss, skew, and electromagnetic emissions.
Recomendado
Test and Measurement
The XCKU035-1FBVA676I can consolidate complex test and measurement functions into one programmable device. Its 444,343 logic cells support instrument control, pattern generation, acquisition sequencing, and protocol handling, while 1,700 DSP slices accelerate filtering, modulation, demodulation, and numerical processing. The 312 I/O give designers access to external instruments, fixtures, reference clocks, and trigger systems. For laboratory-grade performance, engineers should evaluate bitstream timing, I/O standards, clock jitter, reference-voltage requirements, and thermal margins at the intended operating frequency.
Recomendado
Embedded Vision and Signal Processing
The XCKU035-1FBVA676I supports embedded vision systems that must combine pixel-rate processing, control logic, and external connectivity. The 1,700 DSP slices can accelerate correlation, convolution, filtering, and feature extraction, while the programmable logic fabric manages frame timing, sensor control, and data movement. The 19,456 Kbits of block RAM provides on-chip storage for line buffers and working sets, and the 312 I/O can connect image sensors, memory, and display or network interfaces. Practical designs must account for bandwidth balance so sustained sensor rates do not exceed the available memory and I/O resources.
Recomendado
Aerospace and Defense Systems
The XCKU035-1FBVA676I is potentially suitable for programmable signal-processing and control platforms requiring a combination of logic, DSP, memory, and serial connectivity. The 444,343 logic cells and 1,700 DSP slices allow substantial functions to be consolidated, while 16 GTH transceivers support high-speed data links. Because the available part information identifies an industrial temperature grade rather than an explicitly stated aerospace qualification, deployment in flight or defense systems requires review of the exact ordering code, screening level, radiation performance, qualification status, and export-control requirements before design approval.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para XCKU035-1FBVA676I — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | XCKU035-2FBVA676I | XCKU035-L1FBVA676I | XCKU035-2FBVA676E | XCKU035-1FBVA676C | XCKU035-2FBVA676C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 676-pin FCBGA | 676-pin FCBGA | 676-pin FCBGA | 676-pin FCBGA | 676-pin FCBGA | 676-pin FCBGA |
| Speed Designation | -1 | -2 | -L1 | -2 | -1 | -2 |
| Terminal Ordering Grade | I | I | I | E | C | C |
Diferenciadores clave
- Matches the principal XCKU035 package and resource configuration (frente a XCKU035-2FBVA676I)
- Retains the -1 speed tier while offering another package-matched ordering configuration (frente a XCKU035-1FBVA676C)
- Combines substantial parallel logic with integrated high-speed serial resources (frente a XCKU035-2FBVA676E)
Notas de diseño
The 676-pin FCBGA requires a multilayer power distribution network with multiple voltage rails, dedicated high-current routing, and dense local decoupling. Follow the AMD power-delivery guidance for each rail, place decoupling capacitors close to the device pins, and validate voltage sequencing at startup and shutdown. Do not infer rail requirements from the 0.95 V core value alone; consult the device power specification for auxiliary, I/O, and transceiver supplies.
Kintex UltraScale power and junction temperature depend on the selected speed grade, utilization, switching activity, ambient temperature, and PCB heat-removal capability. Perform power estimation with the actual design rather than a generic device-level number, then calculate junction-temperature margin from the package thermal model. Use both top and bottom copper where the board construction permits, and plan thermal vias under the BGA while maintaining electrical isolation between different potential regions.
Use the AMD UltraScale Device Packaging and Pinouts specification as the controlling source for the FCBGA footprint and ball assignments. Preserve symmetry in power and ground distribution, avoid discontinuities in high-speed return paths, and maintain the required via and fanout geometry around the package. Because the device includes GTH transceivers, assign differential pairs with controlled impedance and follow the recommended layer transitions, length compensation, and reference-plane treatment.
High-speed GTH links, memory interfaces, clocks, and parallel I/O can interact through package and board parasitics even when static pin assignments appear correct. Establish a target stackup and impedance rules before layout, use the AMD recommended transceiver reference design as a baseline, and simulate the complete channel with realistic connectors, vias, and escape routing. Validate eye diagrams and jitter margins with measured or approved channel models rather than relying on trace length alone.
Información de cumplimiento
No explicit compliance declarations for RoHS, REACH, AEC-Q100, lead-free construction, halogen-free construction, or conflict-minerals reporting were identified. Confirm the current declarations for the exact ordering code with AMD or the authorized supply channel before qualification.