XMC4200Q48K256BAXUMA1 - 80MHz Cortex-M4 MCU | Infineon
N.º de pieza: XMC4200Q48K256BAXUMA1 ✓ ActivoXMC4200Q48K256BAXUMA1 Descripción general
An industrial microcontroller is a semiconductor device designed to execute real-time control, monitoring, and communication tasks in demanding embedded systems. The XMC4000 family belongs to the ARM Cortex-M4 microcontroller class, combining processor performance, embedded nonvolatile memory, RAM, communication peripherals, timers, and analog interfaces. This integration places the XMC4200 within the broader hierarchy of embedded processor, microcontroller, and industrial automation semiconductor categories.
Principal features include an 80 MHz ARM Cortex-M4 core, 256 KB flash, 40 KB SRAM, hardware floating-point capability, dual CAN/LIN-oriented networking support, and high-resolution PWM timers. The 256 KB flash capacity provides room for application code, configuration data, and firmware updates, while the 40 KB SRAM supports real-time control state, communication buffers, and mixed-signal processing. The industrial temperature range extends from -40°C to 125°C.
The target device is based on the Infineon XMC4200-Q48K256-BA, whose ordering information identifies 256 KB flash, 40 KB SRAM, and industrial-grade temperature operation. Distributor records describe the programmable part as a 48-lead PG-VQFN-53 package with an exposed thermal pad. Its CAN, LIN, timer/PWM, and mixed-signal resources support designs requiring deterministic control and networked fieldbus communication without relying solely on a general-purpose processor.
Typical applications include servo and motor controllers, industrial CAN and LIN nodes, factory automation equipment, industrial sensor hubs, motion-control platforms, and mixed-signal monitoring systems. In each case, the MCU consolidates real-time processing and communication while reducing the number of discrete interface components required on the board.
Designers should verify every peripheral assignment, pin multiplexing option, and exposed-pad connection against the manufacturer datasheet before layout release. Input and output signal integrity, CAN and LIN termination, clock configuration, decoupling, and thermal management are especially important in electrically noisy industrial environments. Firmware should also include watchdog, fault-state, and brownout recovery behavior appropriate to the target system.
This page combines verified manufacturer and distributor specifications, commercial availability information, a strict drop-in assessment, and application-oriented design guidance. It distinguishes documented values from missing technical data so engineers can make sourcing and design decisions without mistaking unsupported assumptions for manufacturer specifications.
Alternativas directas para XMC4200Q48K256BAXUMA1 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
XMC4200-Q48K256-BA
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
XMC4200Q48K256BAXUMA1 Valores máximos y características eléctricas
| Product Type | Industrial 32-bit ARM Cortex-M4 microcontroller |
| Series | XMC4000 |
| Processor Core | ARM Cortex-M4 |
| Frecuencia de reloj máxima | 80 MHz |
| Architecture | 32-bit |
| Flash Memory | 256 KB |
| Flash Organization | 256K x 8 |
| SRAM | 40 KB |
| Floating Point Unit | Hardware FPU |
| Communication Interfaces | CAN and LIN |
| Timer and PWM Resources | High-resolution PWM timers |
| Analog and Mixed-Signal Resources | Mixed-signal acquisition peripherals |
| Rango de temperatura de funcionamiento | -40°C to +125°C |
| Encapsulado | PG-VQFN-48-53 with exposed pad |
| Lead Count | 48 leads plus exposed pad |
| Tipo de montaje | Surface mount |
| Product Qualification | Industrial-grade |
Guía de configuración de pines de XMC4200Q48K256BAXUMA1 pg-vqfn-48-53 with exposed pad
Configuración de pines para XMC4200Q48K256BAXUMA1 (encapsulado pg-vqfn-48-53 with exposed pad). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para XMC4200Q48K256BAXUMA1.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
XMC4200Q48K256BAXUMA1 es adecuado para 6 aplicacións: Industrial Servo Motor Control, CAN-Based Industrial Controller, LIN Sub-Networking Node, Mixed-Signal Condition Monitoring, Factory Automation Equipment, Real-Time Power Conversion Control.
Industrial Servo Motor Control
The XMC4200Q48K256BAXUMA1 fits industrial servo-control platforms that require deterministic PWM generation, high-speed computation, and dependable fieldbus communication. Its 80 MHz ARM Cortex-M4 core and hardware floating-point unit provide computational capacity for filtering, coordinate transforms, and current-control calculations, while the high-resolution PWM timers support precise actuator command generation. The 256 KB flash and 40 KB SRAM leave room for control firmware, parameter storage, telemetry, and diagnostic buffers. CAN and LIN connectivity also allows the controller to exchange commands and fault information with supervisory equipment. According to the manufacturer data, the -40°C to 125°C range fits industrial environments, provided the exposed pad is connected and thermally assessed as directed in the datasheet.
Recomendado
CAN-Based Industrial Controller
The XMC4200Q48K256BAXUMA1 is suitable for a CAN-connected industrial controller that must combine protocol handling with real-time signal processing. Its CAN support enables communication with drives, remote I/O, sensors, and operator interfaces, while the 80 MHz Cortex-M4 core can execute control tasks concurrently with message handling. The 256 KB flash provides practical code capacity for networking stacks and application firmware, and 40 KB of SRAM can support packet buffers and control state. According to the verified manufacturer and distributor information, this part is specifically associated with industrial XMC4000 control systems. Exact baud-rate range, transceiver interface, termination requirements, and peripheral multiplexing must be confirmed against the official datasheet before PCB implementation.
Recomendado
LIN Sub-Networking Node
The XMC4200Q48K256BAXUMA1 can serve as a LIN-connected node in a distributed industrial system where local control and network diagnostics must coexist. LIN support is useful for inexpensive peripheral networks connected to sensors, actuators, and operator panels, while the Cortex-M4 processor supplies more computation than a simple communication controller. Its 40 KB SRAM allows communication buffers and application state to coexist with control logic, and 256 KB flash supports the relevant protocol stack and diagnostics. According to verified product information, the device combines CAN, LIN, timers, PWM, and mixed-signal acquisition resources. The implementation must still include the correct physical-layer transceiver, approved termination, ESD protection, and firmware handling for LIN faults and wake-up behavior.
Recomendado
Mixed-Signal Condition Monitoring
The XMC4200Q48K256BAXUMA1 is appropriate for mixed-signal condition-monitoring equipment that must acquire sensor information and communicate results. Its mixed-signal acquisition resources can support industrial monitoring functions, while the 80 MHz ARM Cortex-M4 core provides enough performance for digital filtering, scaling, fault detection, and communication processing. The 40 KB SRAM supports working buffers for acquired samples, while the 256 KB flash can retain firmware, calibration tables, and event logs. According to verified distributor and embedded-device information, the XMC4200 combines high-resolution PWM, CAN/LIN, and mixed-signal capabilities. Signal conditioning remains essential: sensor outputs require appropriate filtering, scaling, protection, and grounding before being connected to the MCU, and analog limits must be checked directly in the manufacturer datasheet.
Recomendado
Factory Automation Equipment
The XMC4200Q48K256BAXUMA1 fits factory-automation modules that coordinate sensors, actuators, and networked factory equipment. The 80 MHz Cortex-M4 core can execute real-time control and communication tasks, while CAN and LIN support connectivity across different industrial network segments. Its industrial temperature rating of -40°C to 125°C supports deployment across controlled industrial temperature ranges, and the combination of 256 KB flash with 40 KB SRAM provides a practical memory balance for embedded applications. According to the verified Infineon product page, this device is intended for industrial ARM Cortex-M4 designs. A production design should include brownout recovery, watchdog handling, safe-state outputs, diagnostics, and verified electrostatic and surge-protection provisions rather than relying on firmware alone for system safety.
Recomendado
Real-Time Power Conversion Control
The XMC4200Q48K256BAXUMA1 can support real-time power-conversion control where high-resolution PWM, fast computation, and deterministic communication are important. The Cortex-M4 processor at up to 80 MHz is suitable for executing sampled control loops and supervisory logic, while the hardware floating-point unit accelerates arithmetic commonly used in filtering and transformations. Its mixed-signal resources complement the timer and PWM functions, although the actual converter application depends on the documented ADC, comparator, and timer capabilities of the exact package. According to the verified product information, the XMC4200 targets motor-drive and motion-control workloads. Designers should verify switching timing, input-voltage limits, analog accuracy, fault-response latency, and thermal performance before using the MCU in a power stage.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para XMC4200Q48K256BAXUMA1 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | XMC4200-Q48K256-BA |
|---|---|---|
| Brand | Infineon | Infineon |
| Package | PG-VQFN-48-53 | PG-VQFN-48-53 - same device ordering designation |
| Processor Core | ARM Cortex-M4 | ARM Cortex-M4 |
| Maximum Clock Frequency | 80 MHz | 80 MHz |
| Flash Memory | 256 KB | 256 KB |
| SRAM | 40 KB | 40 KB |
| Communication Interfaces | CAN and LIN | CAN and LIN |
| Operating Temperature Range | -40°C to +125°C | -40°C to +125°C |
| Floating Point Unit | Hardware FPU | Hardware FPU |
Diferenciadores clave
- Combines 256 KB flash with 40 KB SRAM in an industrial Cortex-M4 device (frente a XMC4108-Q48K64BA)
- Provides CAN and LIN connectivity for distributed industrial control (frente a ATMEGA2560-16AUR)
- Supports an industrial temperature range of -40°C to +125°C (frente a ATMEGA2560V-8AUR)
- Combines an 80 MHz Cortex-M4 core with a hardware floating-point unit (frente a XMC4108-Q48K64BA)
Notas de diseño
Confirm the complete operating-voltage range, absolute maximum ratings, internal supply architecture, and permitted startup sequence in the Infineon datasheet before selecting decoupling capacitors. The verified search data identifies a nominal 1.3 V figure but does not expose the complete supply limits. Place required local bypass capacitance close to the corresponding power pins, provide a controlled power-up path, and test brownout behavior across the full expected input range.
Treat the exposed pad as both an electrical connection and the principal thermal path. Follow the datasheet's land-pattern and paste recommendations rather than adding arbitrary copper beyond the specified geometry. Verify junction-temperature margin using the actual PCB copper, enclosure airflow, ambient temperature, and switching losses. Estimated calculations should use measured or manufacturer-specified thermal parameters; no thermal resistance value was available in the supplied data.
Assign pins directly from the official XMC4100/XMC4200 package-pin table and cross-check every alternate-function setting against the firmware initialization sequence. Keep sensitive analog inputs away from high-current switching nodes and fast digital edges, provide a continuous ground reference, and reserve the exposed-pad vias specified by the package guidance. Verify CAN and LIN routing against their transceiver and connector locations to minimize return-path discontinuities.
Do not assume that similarly named XMC4100 or XMC4108 devices are drop-in replacements for this XMC4200. Their flash, SRAM, and peripheral configurations differ, and the supplied cross-reference data does not establish pin-to-pin equivalence. A valid redesign must compare the exact package-pin table, clock tree, memory map, analog functions, communication interfaces, voltage requirements, and firmware dependencies rather than relying only on family name or package similarity.
Información de cumplimiento
The supplied verified results identify the device as industrial-grade and state a -40°C to 125°C operating range, but they do not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. These fields remain unknown rather than assuming compliance.
