محصولات (46,000+)

STM32F072RBH6 - 48MHz Cortex-M0 128KB MCU | STMicroelectronics
STM32F072RBH6

STM32F072RBH6 - 48MHz Cortex-M0 128KB MCU | STMicroelectronics

The STMicroelectronics STM32F072RBH6 is a 32-bit ARM Cortex-M0 microcontroller operating at 48 MHz, with 128 KB of Flash memory, 16 KB of SRAM, USB, CAN, and CEC connectivity, and a 64-pin UFBGA package measuring 5 mm by 5 mm. Designed for compact embedded systems, this STM32F0 device combines a low-cost microcontroller platform with USB and CAN support in a very small package. A microcontroller is a semiconductor device that integrates a processor core, memory, peripherals, and communication interfaces into one embedded-control component. The ARM Cortex-M0 core uses a compact instruction set intended for cost-sensitive applications, while the STM32F072RBH6 adds 128 KB of Flash for firmware and 16 KB of SRAM for working data. USB, CAN, and CEC interfaces allow the device to connect to host systems, industrial networks, and consumer-electronics control signals. Key verified features include a 32-bit ARM Cortex-M0 core, a maximum CPU frequency of 48 MHz, 128 KB of 128 K x 8 Flash, and 16 KB of SRAM. The device is identified as a mainstream USB-line MCU with CAN and CEC functions. Its 64-UFBGA package supports compact board layouts, but the dense 5 mm by 5 mm land pattern requires careful PCB design, inspection, and assembly planning. The STM32F072RBH6 belongs to the STM32F0 family and is positioned between simple control MCUs and more highly integrated connectivity devices. Its combination of USB and CAN is useful for portable accessories, industrial monitoring nodes, USB-to-CAN gateways, and embedded human-interface systems. The exact peripheral configuration, operating-temperature range, voltage limits, pin functions, and electrical timing values require confirmation from the manufacturer datasheet. Typical applications include USB-connected control devices, CAN-based industrial or automotive-adjacent monitoring equipment, consumer peripherals, low-cost embedded controllers, and compact sensor-interface products. Firmware development should use the STM32F0 toolchain and account for the package's fine-pitch ball assignment and exposed-pad requirements. For a new design, verify every ball assignment, power domain, decoupling requirement, and exposed-pad connection against the official STM32F072RBH6 documentation before layout release. Because the verified search results identify the package as 64-UFBGA (5 x 5), use the exact manufacturer land pattern rather than a generic 64-pin QFN footprint. This product page consolidates distributor specifications, source links, procurement information, and engineering-oriented usage guidance for the STM32F072RBH6. It is intended to support initial component selection while directing engineers to the official STMicroelectronics datasheet for authoritative pinout, electrical, and reliability data.

RFQ تماس
STM32F072RBH6TR - 48MHz Cortex-M0 128KB MCU | STMicroelectronics (Tape & Reel)
STM32F072RBH6TR

STM32F072RBH6TR - 48MHz Cortex-M0 128KB MCU | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F072RBH6TR is a 32-bit ARM Cortex-M0 microcontroller operating at 48 MHz, with 128 KB of Flash memory, 16 KB of SRAM, USB, CAN, and CEC connectivity, and a 64-pin UFBGA package measuring 5 mm by 5 mm. Designed for compact embedded systems, this STM32F0 device combines a low-cost microcontroller platform with USB and CAN support in a very small package. A microcontroller is a semiconductor device that integrates a processor core, memory, peripherals, and communication interfaces into one embedded-control component. The ARM Cortex-M0 core uses a compact instruction set intended for cost-sensitive applications, while the STM32F072RBH6TR adds 128 KB of Flash for firmware and 16 KB of SRAM for working data. USB, CAN, and CEC interfaces allow the device to connect to host systems, industrial networks, and consumer-electronics control signals. Key verified features include a 32-bit ARM Cortex-M0 core, a maximum CPU frequency of 48 MHz, 128 KB of 128 K x 8 Flash, and 16 KB of SRAM. The device is identified as a mainstream USB-line MCU with CAN and CEC functions. Its 64-UFBGA package supports compact board layouts, but the dense 5 mm by 5 mm land pattern requires careful PCB design, inspection, and assembly planning. The STM32F072RBH6TR belongs to the STM32F0 family and is positioned between simple control MCUs and more highly integrated connectivity devices. Its combination of USB and CAN is useful for portable accessories, industrial monitoring nodes, USB-to-CAN gateways, and embedded human-interface systems. The exact peripheral configuration, operating-temperature range, voltage limits, pin functions, and electrical timing values require confirmation from the manufacturer datasheet. Typical applications include USB-connected control devices, CAN-based industrial or automotive-adjacent monitoring equipment, consumer peripherals, low-cost embedded controllers, and compact sensor-interface products. Firmware development should use the STM32F0 toolchain and account for the package's fine-pitch ball assignment and exposed-pad requirements. For a new design, verify every ball assignment, power domain, decoupling requirement, and exposed-pad connection against the official STM32F072RBH6TR documentation before layout release. Because the verified search results identify the package as 64-UFBGA (5 x 5), use the exact manufacturer land pattern rather than a generic 64-pin QFN footprint. This product page consolidates distributor specifications, source links, procurement information, and engineering-oriented usage guidance for the STM32F072RBH6TR. It is intended to support initial component selection while directing engineers to the official STMicroelectronics datasheet for authoritative pinout, electrical, and reliability data.

RFQ تماس
STM32F072RBT6 - 48MHz Cortex-M0 MCU, 128KB Flash, USB/CAN | ST
STM32F072RBT6

STM32F072RBT6 - 48MHz Cortex-M0 MCU, 128KB Flash, USB/CAN | ST

The STMicroelectronics STM32F072RBT6 is a 32-bit ARM Cortex-M0 mainstream microcontroller operating at up to 48 MHz, integrating 128 KB of embedded Flash and 16 KB of SRAM in a 64-pin LQFP (10x10 mm) surface-mount package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals on one die, sitting at the lowest level of the embedded-system hierarchy: MCU -> embedded processor -> computing system. The STM32F0 series is positioned inside ST's broader STM32 family of ARM-based 32-bit MCUs, targeting cost-sensitive mainstream designs that still require modern connectivity such as USB and CAN. Key specifications of the STM32F072RBT6 include a crystal-less USB 2.0 full-speed device interface, which eliminates the need for an external USB clock crystal and reduces bill-of-materials cost and PCB area, plus a CAN bus controller, HDMI-CEC hardware, and up to 51 general-purpose I/O pins in the 64-LQFP package, many of them 5V-tolerant for direct legacy interfacing. The device also embeds a 12-bit 1 Msps ADC, a 12-bit DAC, multiple 16-bit and 32-bit timers, USART, SPI, I2C, and support for low-power Sleep, Stop and Standby modes. Architecturally, the STM32F072RBT6 is built around the high-performance ARM Cortex-M0 32-bit RISC core with single-cycle I/O access, executing the Thumb-2 instruction set at up to 48 MHz (1.25 DMIPS/MHz). The internal bus matrix connects the core to Flash, SRAM, and peripherals via AHB and APB bridges, while the clock tree is driven by an internal 8 MHz RC and a 48 MHz RC that supports the USB clock domain directly, which is what enables crystal-less USB operation. Typical applications include USB device accessories (HID keyboards, game controllers, USB-C debug probes), CAN-based industrial nodes and automotive-adjacent peripherals, motor control and consumer appliances, and smart-home IoT endpoints where the combination of USB, CAN, and rich 5V-tolerant GPIO density all in a 64-LQFP fits a wide range of mainstream designs. When designing with this part, note that the crystal-less USB relies on the internal 48 MHz HSI48 clock, so compliance testing against USB-IF limits should be planned early; for designs needing tighter USB jitter, an external crystal can be tied to the OSC pins. Also, the 5V-tolerant I/Os are tolerant only when the related VDD is present - do not back-power unpowered banks. This page synthesizes distributor pricing context, drop-in alternative analysis, and practical design notes not found in the manufacturer datasheet, providing information gain for engineers comparing STM32F0 options against NXP LPC, GigaDevice GD32, and other Cortex-M0 mainstream MCUs.

RFQ تماس
STM32F072RBT6TR - 48MHz Cortex-M0 MCU, 128KB Flash, USB/CAN | ST (Tape & Reel)
STM32F072RBT6TR

STM32F072RBT6TR - 48MHz Cortex-M0 MCU, 128KB Flash, USB/CAN | ST (Tape & Reel)

The STMicroelectronics STM32F072RBT6TR is a 32-bit ARM Cortex-M0 mainstream microcontroller operating at up to 48 MHz, integrating 128 KB of embedded Flash and 16 KB of SRAM in a 64-pin LQFP (10x10 mm) surface-mount package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals on one die, sitting at the lowest level of the embedded-system hierarchy: MCU -> embedded processor -> computing system. The STM32F0 series is positioned inside ST's broader STM32 family of ARM-based 32-bit MCUs, targeting cost-sensitive mainstream designs that still require modern connectivity such as USB and CAN. Key specifications of the STM32F072RBT6TR include a crystal-less USB 2.0 full-speed device interface, which eliminates the need for an external USB clock crystal and reduces bill-of-materials cost and PCB area, plus a CAN bus controller, HDMI-CEC hardware, and up to 51 general-purpose I/O pins in the 64-LQFP package, many of them 5V-tolerant for direct legacy interfacing. The device also embeds a 12-bit 1 Msps ADC, a 12-bit DAC, multiple 16-bit and 32-bit timers, USART, SPI, I2C, and support for low-power Sleep, Stop and Standby modes. Architecturally, the STM32F072RBT6TR is built around the high-performance ARM Cortex-M0 32-bit RISC core with single-cycle I/O access, executing the Thumb-2 instruction set at up to 48 MHz (1.25 DMIPS/MHz). The internal bus matrix connects the core to Flash, SRAM, and peripherals via AHB and APB bridges, while the clock tree is driven by an internal 8 MHz RC and a 48 MHz RC that supports the USB clock domain directly, which is what enables crystal-less USB operation. Typical applications include USB device accessories (HID keyboards, game controllers, USB-C debug probes), CAN-based industrial nodes and automotive-adjacent peripherals, motor control and consumer appliances, and smart-home IoT endpoints where the combination of USB, CAN, and rich 5V-tolerant GPIO density all in a 64-LQFP fits a wide range of mainstream designs. When designing with this part, note that the crystal-less USB relies on the internal 48 MHz HSI48 clock, so compliance testing against USB-IF limits should be planned early; for designs needing tighter USB jitter, an external crystal can be tied to the OSC pins. Also, the 5V-tolerant I/Os are tolerant only when the related VDD is present - do not back-power unpowered banks. This page synthesizes distributor pricing context, drop-in alternative analysis, and practical design notes not found in the manufacturer datasheet, providing information gain for engineers comparing STM32F0 options against NXP LPC, GigaDevice GD32, and other Cortex-M0 mainstream MCUs.

RFQ تماس
STM32F072RBT7 - 48MHz Cortex-M0 128KB MCU | STMicroelectronics
STM32F072RBT7

STM32F072RBT7 - 48MHz Cortex-M0 128KB MCU | STMicroelectronics

The STMicroelectronics STM32F072RBT7 is a 32-bit ARM Cortex-M0 microcontroller operating at up to 48 MHz, with 128 KB of embedded Flash memory and a 64-LQFP 10 mm × 10 mm package. The verified distributor data identifies USB, CAN, a 2.5 V or 3.3 V supply context, and 64 pins. These characteristics place it in the STM32F0 family of low-complexity embedded microcontrollers for compact control, connectivity, and industrial designs. A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, peripherals, and I/O into one embedded-control platform. The STM32F0 series belongs to the ARM Cortex-M microcontroller hierarchy and combines a low-complexity 32-bit instruction set with dedicated communication and timing peripherals. This makes the STM32F072RBT7 suitable for systems that need deterministic control without a higher-performance application processor. The STM32F072RBT7 combines a 48 MHz ARM Cortex-M0 core with 128 KB of Flash. Verified distributor records also identify USB and CAN connectivity, which can reduce the need for external interface controllers in connected equipment. Its 64-LQFP package provides 64 physical pins and is suitable for through-hole assembly or mixed-technology PCB layouts where a fine-pitch BGA package would be unnecessary. The available evidence confirms a mainstream STM32F0-series product with USB and CAN support, 128 KB Flash, and operation up to 48 MHz. Detailed peripheral assignments, SRAM capacity, voltage limits, pin functions, bootloader behavior, and electrical timing values are not included in the supplied verified data. Those parameters must be confirmed in the manufacturer datasheet before final schematic or firmware release. Typical uses include USB-connected control accessories, CAN-based industrial nodes, compact motor and actuator controllers, sensor-hub boards, and general embedded products where a 32-bit ARM Cortex-M0 MCU is sufficient. The 64-LQFP package is particularly useful when production teams prefer visible solder joints and straightforward inspection. The main design consideration is interface assignment. USB, CAN, oscillators, reset, programming pins, and general-purpose I/O must be mapped against the manufacturer pinout and application requirements before PCB routing. Firmware support, clock configuration, transceiver requirements, and USB or CAN bus protection are outside the supplied data and should be verified against the official documentation. This page consolidates verified manufacturer and distributor information, technical search coverage, pricing context, and design-oriented interpretation. It does not infer undocumented electrical values, and it distinguishes confirmed specifications from data that still requires engineer verification.

RFQ تماس
STM32F072RBT7TR - 48MHz Cortex-M0 128KB MCU | STMicroelectronics (Tape & Reel)
STM32F072RBT7TR

STM32F072RBT7TR - 48MHz Cortex-M0 128KB MCU | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F072RBT7TR is a 32-bit ARM Cortex-M0 microcontroller operating at up to 48 MHz, with 128 KB of embedded Flash memory and a 64-LQFP 10 mm × 10 mm package. The verified distributor data identifies USB, CAN, a 2.5 V or 3.3 V supply context, and 64 pins. These characteristics place it in the STM32F0 family of low-complexity embedded microcontrollers for compact control, connectivity, and industrial designs. A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, peripherals, and I/O into one embedded-control platform. The STM32F0 series belongs to the ARM Cortex-M microcontroller hierarchy and combines a low-complexity 32-bit instruction set with dedicated communication and timing peripherals. This makes the STM32F072RBT7TR suitable for systems that need deterministic control without a higher-performance application processor. The STM32F072RBT7TR combines a 48 MHz ARM Cortex-M0 core with 128 KB of Flash. Verified distributor records also identify USB and CAN connectivity, which can reduce the need for external interface controllers in connected equipment. Its 64-LQFP package provides 64 physical pins and is suitable for through-hole assembly or mixed-technology PCB layouts where a fine-pitch BGA package would be unnecessary. The available evidence confirms a mainstream STM32F0-series product with USB and CAN support, 128 KB Flash, and operation up to 48 MHz. Detailed peripheral assignments, SRAM capacity, voltage limits, pin functions, bootloader behavior, and electrical timing values are not included in the supplied verified data. Those parameters must be confirmed in the manufacturer datasheet before final schematic or firmware release. Typical uses include USB-connected control accessories, CAN-based industrial nodes, compact motor and actuator controllers, sensor-hub boards, and general embedded products where a 32-bit ARM Cortex-M0 MCU is sufficient. The 64-LQFP package is particularly useful when production teams prefer visible solder joints and straightforward inspection. The main design consideration is interface assignment. USB, CAN, oscillators, reset, programming pins, and general-purpose I/O must be mapped against the manufacturer pinout and application requirements before PCB routing. Firmware support, clock configuration, transceiver requirements, and USB or CAN bus protection are outside the supplied data and should be verified against the official documentation. This page consolidates verified manufacturer and distributor information, technical search coverage, pricing context, and design-oriented interpretation. It does not infer undocumented electrical values, and it distinguishes confirmed specifications from data that still requires engineer verification.

RFQ تماس
STM32F072V8H6 - 48MHz Cortex-M0 64KB MCU | STMicroelectronics
STM32F072V8H6

STM32F072V8H6 - 48MHz Cortex-M0 64KB MCU | STMicroelectronics

The STMicroelectronics STM32F072V8H6 is a 32-bit ARM Cortex-M0 microcontroller with a 48 MHz operating frequency, 64 KB Flash memory, and a 100-UFBGA 7 x 7 mm package. The device is part of the STM32F0 mainstream MCU family and includes USB, CAN, and embedded-control connectivity according to the verified distributor descriptions. Its compact package and 64K x 8 Flash organization make it suitable for compact USB, CAN, industrial, and embedded control systems where integration and deterministic performance matter. The STM32F072x8/xB family combines a high-performance Cortex-M0 core with embedded memory and peripheral connectivity in a low-footprint device. A microcontroller is a semiconductor device that integrates a processor core, Flash program memory, SRAM, peripherals, and interface controllers into one component. In the hierarchy of semiconductor components, an MCU sits below embedded processor and general-purpose controller categories and above application-specific control devices. The STM32F072V8H6 is therefore positioned between simple fixed-function controllers and higher-performance microprocessors, providing a programmable platform for control loops, communications, and peripheral coordination. Key verified characteristics include the ARM Cortex-M0 core, 32-bit architecture, 48 MHz maximum operating frequency, 64 KB Flash memory, and 100-UFBGA packaging. The product listing also identifies USB, CAN, and an embedded-control-oriented STM32F0 platform. These features make the MCU appropriate for USB-connected peripherals, CAN nodes, industrial interfaces, and compact control products. Compared with a discrete controller, the integrated MCU reduces the number of external components required for processing, firmware storage, communication, and control. The 100-UFBGA package is a compact surface-mount ball-grid package. Ball-grid construction supports dense PCB routing when the board area is constrained, but assembly and inspection require processes suitable for fine-pitch BGA packages. The 7 x 7 mm package should be laid out according to STMicroelectronics land-pattern and assembly guidance rather than treated as a generic QFN footprint. Exact electrical limits, pin names, memory sizes beyond the verified Flash figure, and peripheral details should be confirmed in the manufacturer datasheet. Typical applications include USB peripherals, CAN communication endpoints, industrial automation modules, compact motor-control boards, and low-cost USB power or data products. In each case, the 48 MHz Cortex-M0 core provides the processing baseline for real-time control, while USB and CAN connectivity reduce the need for external interface components. The 64 KB Flash capacity is most appropriate for firmware that requires moderate code density and local storage rather than large application images. Designers should verify the exact package pinout, exposed-ball assignments, power requirements, clock configuration, decoupling, and programming interface against the official STM32F072x8/xB datasheet. BGA assembly should include adequate thermal and electrical design checks. This page consolidates the verified manufacturer and distributor descriptions, package information, pricing references, cross-reference results, and engineering guidance while clearly identifying information that was not supplied by the source data.

RFQ تماس
STM32F072V8T6 - 48MHz 64KB Cortex-M0 MCU | STMicroelectronics
STM32F072V8T6

STM32F072V8T6 - 48MHz 64KB Cortex-M0 MCU | STMicroelectronics

The STMicroelectronics STM32F072V8T6 is a 32-bit ARM Cortex-M0 microcontroller operating at up to 48 MHz, with 64 KB of Flash memory and 16 KB of SRAM, supplied in a 100-pin LQFP package measuring 14 x 14 mm. The STM32F072V8T6 combines a low-power embedded design with USB, CAN, ADC, DAC, timers, and serial communication peripherals. According to the verified distributor and manufacturer listings, it is an STM32F0-series MCU designed for embedded control, connectivity, and signal-processing applications. Its 48 MHz Cortex-M0 core provides deterministic instruction throughput for control loops, while the STM32 family ecosystem provides extensive firmware, peripheral, and development-tool support. What is an STM32F0-series microcontroller? It is a 32-bit embedded microcontroller, a category of microcontroller and semiconductor device used to monitor sensors, operate actuators, process data, and control communication interfaces. The STM32F072V8T6 belongs to the STM32 family hierarchy: STM32F072V8T6 > STM32F0 series > STM32 family > ARM Cortex-M0 microcontroller > embedded processor > semiconductor. Its combination of USB and CAN connectivity is useful for industrial control, USB peripherals, automotive-style communication subsystems, and compact consumer equipment. Key verified features include a 32-bit ARM Cortex-M0 core, a maximum 48 MHz operating frequency, 64 KB Flash, and 16 KB SRAM. The listed package is 100-LQFP, 14 x 14 mm, providing a larger pin count than lower-density STM32 packages and exposing more GPIO and peripheral options. The device is identified by distributor sources as a USB-line MCU with USB, CAN, and communication interfaces. The verified Mouser listing specifically identifies the part as an ARM Cortex-M0 USB-line MCU with 64 KB Flash, USB, and CAN. The STM32F072V8T6 architecture combines a compact general-purpose core with dedicated peripherals for analog measurement, timing, communications, and control. USB and CAN support can reduce the need for separate interface devices in connected embedded systems. The 100-LQFP package is useful when a design requires more externally accessible pins than smaller packages provide, while its 14 x 14 mm footprint remains compact compared with many higher-pin-count packages. The exact ADC, DAC, timer, voltage, and pin-level parameters are not present in the supplied verified snippets, so those values are marked as data needed rather than inferred. Typical applications include USB-connected data acquisition, industrial sensor controllers, CAN-based equipment, motor and actuator control, embedded gateways, and compact automation products. For USB applications, the MCU can manage device communication alongside timers and analog functions. For CAN-based systems, it can combine network communication with local control and data processing. Compared with a simpler microcontroller, its USB and CAN integration can reduce component count, although firmware, peripheral configuration, and device-specific validation remain necessary. The primary design consideration is package planning. A 100-LQFP footprint is not interchangeable with smaller STM32 packages without a PCB redesign, so power, ground, decoupling, signal-routing, and programming access must be planned against the verified 100-pin package. Firmware should also be validated against the exact STM32F072V8T6 datasheet, especially for pin multiplexing, peripheral electrical limits, clock configuration, and USB/CAN timing. Pricing shown in the verified LCSC result is $2.7757 as of 2026-10-22; distributor availability and prices can change. This product data page combines the verified manufacturer and distributor identity, 48 MHz Cortex-M0 positioning, 64 KB Flash, 16 KB SRAM, USB, CAN, and the 100-LQFP package with practical sourcing and design context. It does not infer unreported electrical limits or claim a substitute part unless the supplied cross-reference evidence establishes same-package compatibility.

RFQ تماس
STM32F072VBH6 - 48MHz Cortex-M0 128KB MCU | STMicroelectronics
STM32F072VBH6

STM32F072VBH6 - 48MHz Cortex-M0 128KB MCU | STMicroelectronics

The STMicroelectronics STM32F072VBH6 is a 32-bit ARM Cortex-M0 RISC microcontroller operating up to 48 MHz, with 128 KB of Flash memory and a 100-UFBGA 7 x 7 mm package. It is designed for embedded USB, CAN, general-purpose control, and connected-device applications requiring a compact high-pin-count MCU. A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, peripherals, and communication interfaces into one package. The STM32F0 family belongs to the broader embedded microcontroller hierarchy and is positioned for cost-sensitive applications that need 32-bit processing without the complexity of higher-performance MCU families. The STM32F072VBH6 specifically combines 48 MHz processing, 128 KB Flash, USB, and CAN capabilities. Verified distributor data identifies the part as an ARM Cortex-M0 32-bit MCU with 128 KB Flash, USB, CAN, and a 100-UFBGA 7 x 7 mm package. Mouser describes it as a mainstream ARM Cortex-M0 USB-line MCU, while DigiKey lists the same 48 MHz operating frequency, 128 KB Flash organization, and 100-UFBGA package. The package supports dense PCB integration while exposing the device's broader peripheral and signal capabilities. The device family is appropriate for USB peripherals, CAN-connected equipment, industrial control modules, sensor interfaces, data acquisition systems, and consumer accessories. USB and CAN are especially relevant where a design needs short-range connectivity or robust network communication in an embedded controller. Firmware development should account for the exact STM32F072x8/xB device variant, pin multiplexing, clock configuration, and peripheral mapping before PCB release. The H6 ordering suffix identifies the supplied temperature and packaging configuration within STMicroelectronics' ordering system, but the supplied data does not state a complete temperature range, pinout, memory map, or electrical limits. Those parameters must be confirmed against the official STM32F072VB product page and manufacturer datasheet before design sign-off. For sourcing, compare the exact STM32F072VBH6 ordering code with STM32F072VBH6TR, which is identified in the verified distributor results as a distinct listing with the same 100-UFBGA 7 x 7 mm format. Package, temperature grade, firmware assumptions, and lifecycle requirements should be checked rather than assuming that a related ordering code is interchangeable. This page consolidates verified manufacturer and distributor information, preserves missing technical fields rather than guessing, and provides practical sourcing context for engineers evaluating the STM32F072VBH6.

RFQ تماس
STM32F072VBH6TR - 48MHz Cortex-M0 128KB MCU | STMicroelectronics (Tape & Reel)
STM32F072VBH6TR

STM32F072VBH6TR - 48MHz Cortex-M0 128KB MCU | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F072VBH6TR is a 32-bit ARM Cortex-M0 RISC microcontroller operating up to 48 MHz, with 128 KB of Flash memory and a 100-UFBGA 7 x 7 mm package. It is designed for embedded USB, CAN, general-purpose control, and connected-device applications requiring a compact high-pin-count MCU. A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, peripherals, and communication interfaces into one package. The STM32F0 family belongs to the broader embedded microcontroller hierarchy and is positioned for cost-sensitive applications that need 32-bit processing without the complexity of higher-performance MCU families. The STM32F072VBH6TR specifically combines 48 MHz processing, 128 KB Flash, USB, and CAN capabilities. Verified distributor data identifies the part as an ARM Cortex-M0 32-bit MCU with 128 KB Flash, USB, CAN, and a 100-UFBGA 7 x 7 mm package. Mouser describes it as a mainstream ARM Cortex-M0 USB-line MCU, while DigiKey lists the same 48 MHz operating frequency, 128 KB Flash organization, and 100-UFBGA package. The package supports dense PCB integration while exposing the device's broader peripheral and signal capabilities. The device family is appropriate for USB peripherals, CAN-connected equipment, industrial control modules, sensor interfaces, data acquisition systems, and consumer accessories. USB and CAN are especially relevant where a design needs short-range connectivity or robust network communication in an embedded controller. Firmware development should account for the exact STM32F072x8/xB device variant, pin multiplexing, clock configuration, and peripheral mapping before PCB release. The H6 ordering suffix identifies the supplied temperature and packaging configuration within STMicroelectronics' ordering system, but the supplied data does not state a complete temperature range, pinout, memory map, or electrical limits. Those parameters must be confirmed against the official STM32F072VB product page and manufacturer datasheet before design sign-off. For sourcing, compare the exact STM32F072VBH6TR ordering code with STM32F072VBH6TRTR, which is identified in the verified distributor results as a distinct listing with the same 100-UFBGA 7 x 7 mm format. Package, temperature grade, firmware assumptions, and lifecycle requirements should be checked rather than assuming that a related ordering code is interchangeable. This page consolidates verified manufacturer and distributor information, preserves missing technical fields rather than guessing, and provides practical sourcing context for engineers evaluating the STM32F072VBH6TR.

RFQ تماس
STM32F072VBH7 - 48MHz Cortex-M0 128KB MCU | STMicroelectronics
STM32F072VBH7

STM32F072VBH7 - 48MHz Cortex-M0 128KB MCU | STMicroelectronics

The STMicroelectronics STM32F072VBH7 is a 32-bit ARM Cortex-M0 microcontroller with a 48 MHz CPU, 128 KB of Flash, USB, CAN, 12 timers, ADC, DAC, and communication interfaces, supplied in a 100-UFBGA 7 mm x 7 mm package. A microcontroller is an integrated semiconductor device that combines a processor core, program memory, data memory, peripherals, and interface circuitry into one compact component. The STM32F072 series belongs to the STM32F0 mainstream MCU line and is designed for embedded control, communications, data acquisition, USB connectivity, and industrial equipment requiring low power and real-time peripheral integration. The verified source data identifies the STM32F072VBH7 as an ARM Cortex-M0 MCU operating at up to 48 MHz with 128 KB Flash. The device also includes USB full-speed 2.0, CAN, 12 timers, ADC, DAC, and communication interfaces. Its stated operating supply condition includes 2.5 V or 3.3 V, while the distributor listings identify a maximum operating voltage of 3.6 V in the component summary. The 100-UFBGA package provides a compact physical solution for high-density embedded designs while supporting exposed-pad thermal management. Compared with larger leaded packages, UFBGA is particularly useful when board area is constrained. Its fine pitch also increases manufacturing sensitivity, making land-pattern accuracy, solder-paste control, and reflow-profile validation essential. Typical applications include USB-connected embedded peripherals, CAN-based industrial or automotive-adjacent control equipment, motor and power-control systems, data loggers, sensor hubs, consumer products, and communication gateways. The combination of USB, CAN, timers, analog conversion functions, and a 48 MHz ARM core makes the MCU suitable for designs that need multiple peripheral functions without a higher-complexity processor. Designs using this MCU should verify every power rail, decoupling requirement, pin multiplexing option, boot configuration, clock source, and programming interface against the manufacturer datasheet before layout release. For BGA assembly, thermal vias, pad geometry, solder-mask design, and inspection requirements should be reviewed with the PCB assembly provider. STM32F072VBH7 availability and price should be checked directly with authorized distributors, as the supplied search data does not include numeric distributor pricing.

RFQ تماس
STM32F072VBT6 - 48MHz Cortex-M0 128KB MCU | STMicroelectronics
STM32F072VBT6

STM32F072VBT6 - 48MHz Cortex-M0 128KB MCU | STMicroelectronics

The STMicroelectronics STM32F072VBT6 is a 32-bit ARM Cortex-M0 microcontroller operating at up to 48 MHz, with 128 KB of Flash memory, 16 KB of SRAM, USB, CAN, and CEC connectivity, and a 2 V to 3.6 V operating-voltage range. It is housed in a 100-pin LQFP package measuring 14 mm by 14 mm. What is a microcontroller? A microcontroller, or MCU, integrates a processor core, nonvolatile program memory, volatile data memory, peripherals, and power-management functions into one semiconductor device. The STM32F0 MCU family belongs to the embedded-processor hierarchy and combines an Arm Cortex-M0 RISC core with GPIO, timers, serial interfaces, analog functions, communications peripherals, and debugging support. This integration allows a controller to execute firmware, acquire inputs, control outputs, and manage connected equipment without a separate external processor. Key features of the STM32F072VBT6 include its 48 MHz maximum operating frequency, 128 KB Flash, 16 KB SRAM, integrated USB and CAN interfaces, and 100-LQFP packaging. The MCU is identified by DigiKey as an STM32F0 series device with a 32-bit Arm Cortex-M0 core. Mouser identifies the same family position as a mainstream Arm Cortex-M0 USB-line MCU with 128 KB Flash, 48 MHz CPU, USB, and CAN connectivity. The STM32F0 architecture is intended for embedded control tasks that require deterministic peripheral access and broad I/O capability in a relatively large package. Its 100-pin LQFP format provides more externally accessible pins than smaller packages, making it useful when a design requires numerous GPIO, communication, timer, or analog-control connections. The verified distributor results specifically identify 128 KB Flash, 16 KB SRAM, 48 MHz operation, 2 V to 3.6 V operation, and USB/CAN features; other detailed electrical and peripheral limits are not provided in the supplied source text. Typical uses include USB-connected embedded controls, CAN-connected industrial or consumer equipment, data-acquisition systems, compact control boards, and products requiring a larger pin count. A design should allocate the MCU supply and ground pins correctly, configure the 2 V to 3.6 V operating environment, and route USB, CAN, and other high-speed or noisy signals according to the manufacturer’s complete datasheet and reference guidance. The main engineering benefit is integration: USB, CAN, Cortex-M0 processing, 128 KB Flash, and 16 KB SRAM are available in one 100-LQFP device, reducing the number of external components. The tradeoff is that the 14 mm by 14 mm package is larger than common 48-pin or 64-pin MCUs, so board area and routing complexity must be considered in compact products. This page consolidates verified distributor specifications, pricing observations, package information, application guidance, and selection considerations. It distinguishes verified values from parameters that require confirmation from the manufacturer datasheet, helping engineers plan sourcing and hardware design without treating unprovided specifications as guaranteed facts.

RFQ تماس
STM32F072VBT6TR - 48MHz Cortex-M0 128KB MCU | STMicroelectronics (Tape & Reel)
STM32F072VBT6TR

STM32F072VBT6TR - 48MHz Cortex-M0 128KB MCU | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F072VBT6TR is a 32-bit ARM Cortex-M0 microcontroller operating at up to 48 MHz, with 128 KB of Flash memory, 16 KB of SRAM, USB, CAN, and CEC connectivity, and a 2 V to 3.6 V operating-voltage range. It is housed in a 100-pin LQFP package measuring 14 mm by 14 mm. What is a microcontroller? A microcontroller, or MCU, integrates a processor core, nonvolatile program memory, volatile data memory, peripherals, and power-management functions into one semiconductor device. The STM32F0 MCU family belongs to the embedded-processor hierarchy and combines an Arm Cortex-M0 RISC core with GPIO, timers, serial interfaces, analog functions, communications peripherals, and debugging support. This integration allows a controller to execute firmware, acquire inputs, control outputs, and manage connected equipment without a separate external processor. Key features of the STM32F072VBT6TR include its 48 MHz maximum operating frequency, 128 KB Flash, 16 KB SRAM, integrated USB and CAN interfaces, and 100-LQFP packaging. The MCU is identified by DigiKey as an STM32F0 series device with a 32-bit Arm Cortex-M0 core. Mouser identifies the same family position as a mainstream Arm Cortex-M0 USB-line MCU with 128 KB Flash, 48 MHz CPU, USB, and CAN connectivity. The STM32F0 architecture is intended for embedded control tasks that require deterministic peripheral access and broad I/O capability in a relatively large package. Its 100-pin LQFP format provides more externally accessible pins than smaller packages, making it useful when a design requires numerous GPIO, communication, timer, or analog-control connections. The verified distributor results specifically identify 128 KB Flash, 16 KB SRAM, 48 MHz operation, 2 V to 3.6 V operation, and USB/CAN features; other detailed electrical and peripheral limits are not provided in the supplied source text. Typical uses include USB-connected embedded controls, CAN-connected industrial or consumer equipment, data-acquisition systems, compact control boards, and products requiring a larger pin count. A design should allocate the MCU supply and ground pins correctly, configure the 2 V to 3.6 V operating environment, and route USB, CAN, and other high-speed or noisy signals according to the manufacturer’s complete datasheet and reference guidance. The main engineering benefit is integration: USB, CAN, Cortex-M0 processing, 128 KB Flash, and 16 KB SRAM are available in one 100-LQFP device, reducing the number of external components. The tradeoff is that the 14 mm by 14 mm package is larger than common 48-pin or 64-pin MCUs, so board area and routing complexity must be considered in compact products. This page consolidates verified distributor specifications, pricing observations, package information, application guidance, and selection considerations. It distinguishes verified values from parameters that require confirmation from the manufacturer datasheet, helping engineers plan sourcing and hardware design without treating unprovided specifications as guaranteed facts.

RFQ تماس
STM32F091CBT6 - 48MHz 128KB MCU | STMicroelectronics
STM32F091CBT6

STM32F091CBT6 - 48MHz 128KB MCU | STMicroelectronics

STMicroelectronics STM32F091CBT6 is an ARM Cortex-M0 32-bit RISC microcontroller operating up to 48 MHz, with 128 KB of Flash memory, 32 KB of SRAM, and a 48-pin LQFP package measuring 7 x 7 mm. It operates from a 2.0 V to 3.6 V supply and is positioned for cost-sensitive embedded applications requiring CAN communication, analog conversion, timers, and multiple serial interfaces. A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals in one device. The STM32F091CBT6 belongs to the STM32F0 access-line family, where Cortex-M0 provides a compact instruction set for control-oriented embedded products. This hierarchy places the device among general-purpose microcontrollers, embedded processors, and semiconductor components used to monitor sensors, operate actuators, and manage communication links. Key device features include an ARM Cortex-M0 core operating at up to 48 MHz, 128 KB of Flash, 32 KB of SRAM with hardware parity, a hardware CRC calculation unit, and a 2.0 V to 3.6 V operating range. The STM32F091 series also incorporates CAN capability, 12 timers, ADC, DAC, and communication interfaces, making it suitable for compact industrial controls and connected peripherals. The architecture uses a 32-bit RISC core with integrated high-speed embedded Flash and SRAM. Hardware CRC supports reliable data integrity checks, while the timer, analog, and communications resources reduce the need for external companion ICs. In a typical design, firmware executes from Flash, static data resides in SRAM, and the integrated peripherals handle sensing, timing, communications, and control functions under a common clock and power-management framework. Typical uses include industrial sensor nodes, CAN-connected motor and equipment controllers, compact instrumentation, access-control terminals, and communication equipment. The 48 MHz core supports responsive control loops, while CAN enables deterministic communication between distributed nodes. The LQFP package also provides accessible leads for inspection, rework, and lower-cost automated assembly. Designers should verify pin multiplexing, peripheral instance availability, clock requirements, and the selected Flash-memory and SRAM allocation against the STM32F091CB technical documentation. Because the device provides numerous alternate-function assignments, one physical pin can serve several purposes depending on the firmware configuration. Decoupling, reset, boot, and programming connections should follow the manufacturer reference circuit. This product page consolidates the principal electrical characteristics, application guidance, drop-in comparison options, and practical PCB considerations. Its value is not limited to basic identification: it helps engineers connect the exact memory, core, package, voltage, and interface capabilities to an appropriate embedded-system design.

RFQ تماس
STM32F091CBU6 - 48MHz Cortex-M0 MCU 128KB Flash | STMicroelectronics
STM32F091CBU6

STM32F091CBU6 - 48MHz Cortex-M0 MCU 128KB Flash | STMicroelectronics

The STMicroelectronics STM32F091CBU6 is a 32-bit ARM Cortex-M0 microcontroller operating up to 48 MHz, with 128 KB of flash memory, 32 KB of SRAM, 38 I/O, and CAN connectivity in a 48-pin UFQFPN 7 x 7 mm package. The STM32F091xB/xC family targets cost-sensitive embedded systems that need more performance and peripheral integration than the entry-level STM32F0 devices. A microcontroller is a programmable system-on-chip that integrates a processor core, nonvolatile program memory, volatile working memory, peripherals, and communication interfaces on one package. Within the hierarchy of embedded semiconductors, the STM32F091CBU6 is an ARM Cortex-M0 microcontroller, an STM32 embedded MCU, and a member of the STM32F0 series. Its compact package and broad peripheral set support space-constrained industrial, consumer, communications, and control applications. Key features include a maximum 48 MHz operating frequency, 128 KB of flash, 32 KB of SRAM, and a 2 V to 3.6 V supply range. The device provides a 12-bit ADC, a 12-bit DAC, 12 timers, and CAN support according to the available product summaries. The 38 I/O provide practical connectivity for sensors, actuators, communication transceivers, human-interface interfaces, and board-level control signals within the 48-pin UFQFPN footprint. The STM32F091CBU6 combines an ARM Cortex-M0 RISC core with integrated memory and peripherals intended for embedded control workloads. Its 32-bit architecture provides 32-bit arithmetic and addressing, while the 48 MHz operating point supports time-sensitive control loops and responsive communication handling. The integrated CRC calculation unit, real-time clock functions, and communication peripherals broaden its utility in compact industrial controllers and connected products. Typical uses include CAN-connected industrial controls, compact sensor hubs, motor and actuator controllers, consumer appliances, and communication equipment. It is particularly appropriate when a design benefits from 128 KB of embedded flash and 32 KB of SRAM but does not require the larger memory or faster core of higher STM32 families. For CAN networks, an external transceiver remains necessary between the MCU and physical bus. Designers should verify the complete UFQFPN land pattern, exposed-pad connection, decoupling requirements, and peripheral pin assignments against the manufacturer documentation before layout. Because the verified sources identify the device and package but do not provide the complete numbered pinout, pin-level assignment should not be inferred from the generic QFN drawing. Firmware migration also requires validation of clocks, interrupts, peripherals, and board-level support rather than assuming that package compatibility alone guarantees identical behavior. This page consolidates the verified STM32F091CBU6 specifications, distributor references, same-package comparison candidates, and practical selection guidance. It distinguishes confirmed electrical and packaging facts from details that still require the manufacturer datasheet, helping engineers evaluate this MCU without treating incomplete cross-reference snippets as a substitute for pin-level qualification.

RFQ تماس
STM32F091CCT6 - 48MHz Cortex-M0 MCU with 256KB Flash | ST
STM32F091CCT6

STM32F091CCT6 - 48MHz Cortex-M0 MCU with 256KB Flash | ST

The STMicroelectronics STM32F091CCT6 is a 32-bit ARM Cortex-M0 microcontroller operating up to 48 MHz, with 256 KB of Flash memory and a 48-LQFP 7 x 7 mm package. It supports a 2.0 V to 3.6 V operating range and integrates CAN communication, 12 timers, an ADC, a DAC, and multiple communication interfaces for compact embedded control systems. A microcontroller is a programmable semiconductor that combines a processor core, memory, peripherals, and interface circuitry on one integrated circuit. The STM32F0 access-line MCU family belongs to the broader embedded-controller hierarchy: ARM Cortex-M0 processor core, 32-bit microcontroller, embedded system controller, and semiconductor. Its combination of processing speed, peripheral coverage, and compact package makes it suitable for industrial equipment, sensor nodes, motor controls, and CAN-connected products. Key features include a 48 MHz ARM Cortex-M0 core, 256 KB of Flash, and CAN support capable of operating up to 1 Mbit/s. The device also provides 12 timers, a 12-bit ADC, and a DAC according to the manufacturer datasheet. These resources support applications that require simultaneous digital control, analog measurement, waveform generation, and field-bus communication without using several separate integrated circuits. The STM32F091xB and STM32F091xC devices use a 32-bit RISC architecture and integrate high-speed embedded Flash memory. The CAN interface supports specifications 2.0A and 2.0B, including standard 11-bit and extended 29-bit identifiers. This makes the MCU appropriate for industrial networking, actuator control, and embedded gateways where deterministic protocol support and compact integration are important. Typical applications include CAN-connected sensor hubs, industrial motor controllers, compact PLC modules, medical or diagnostic instrumentation, LED-control systems, and battery-powered IoT equipment. The ADC can acquire analog process variables, the DAC can generate reference or control waveforms, and the timer bank can generate PWM signals for motors, valves, lamps, and power-conversion stages. PCB design should follow the manufacturer pinout and reference-circuit guidance. Place all decoupling capacitors close to the appropriate supply pins, provide a stable clock circuit, route sensitive analog inputs away from switching nodes, and confirm programming, reset, and boot-strapping connections before layout release. The LQFP package also requires adequate solder mask clearance and thermal copper for dependable manufacturing. This product page combines the manufacturer specifications with application guidance, package information, comparison parameters, and practical design considerations. It helps engineers evaluate the STM32F091CCT6 for 48 MHz Cortex-M0 designs that require 256 KB Flash, CAN connectivity, 12 timers, ADC and DAC resources, and a 48-LQFP footprint.

RFQ تماس
STM32F091CCT7 - 48MHz Cortex-M0 MCU | STMicroelectronics
STM32F091CCT7

STM32F091CCT7 - 48MHz Cortex-M0 MCU | STMicroelectronics

The STMicroelectronics STM32F091CCT7 is a 32-bit ARM Cortex-M0 microcontroller operating at up to 48 MHz, with 256 KB of Flash memory and a 48-LQFP 7 x 7 mm package. It belongs to the STM32F0 access-line MCU family, combining a compact RISC core with embedded control peripherals for cost-sensitive industrial, consumer, communications, and automation products. A microcontroller is a semiconductor integrated circuit that integrates a processor core, program memory, data memory, and peripherals such as timers, communication interfaces, and analog-to-digital converters on one device. Within the device hierarchy, the STM32F091CCT7 is an ARM Cortex-M0 microcontroller, an embedded processor, an integrated circuit, and a semiconductor intended for real-time control rather than general-purpose computing. The manufacturer identifies three headline characteristics for this device: a 48 MHz ARM Cortex-M0 core, 256 KB of Flash organized as 256K x 8, and a 48-pin LQFP package measuring 7 x 7 mm. The C package variant provides a practical balance between processing performance, code capacity, and a manageable pin count for medium-density control designs. The manufacturer product page also identifies the STM32F091xB/xC family as a high-performance Cortex-M0 platform operating at up to 48 MHz. The integrated Flash provides space for boot code, application firmware, configuration data, and field-upgrade logic within one package. This can simplify board layout by reducing the need for external program-memory devices. The 48 MHz operating rate supports responsive control loops and time-sensitive peripheral operation, although final real-time performance depends on the selected peripheral, interrupt configuration, firmware architecture, and external clock arrangement. The STM32F091CCT7 is suitable for compact embedded systems requiring a conventional microcontroller footprint and broad embedded-control functionality. Potential design areas include industrial sensing equipment, small motor-control boards, communication modules, consumer controls, and compact instrumentation. A design should be selected only after checking the exact peripheral mix, pin multiplexing, voltage limits, clock tree, and memory requirements in the manufacturer documentation for the STM32F091xB/xC family. Package selection and PCB design require particular attention because the device uses a 48-LQFP rather than a leadless package. The exposed leads provide a larger assembly tolerance than fine-pitch QFN packages and offer straightforward visual inspection, but they require adequate copper routing, solder-mask definition, and thermal-via planning. Use the manufacturer pin-description table and package drawing to assign every ball, power pin, ground pin, and alternate-function signal before layout release. This page combines the exact orderable MPN, manufacturer product information, distributor listings, package hierarchy, replacement considerations, and practical selection guidance. It also distinguishes true pin-compatible family variants from broader MCU alternatives so engineers can evaluate replacement risk before committing a board to production.

RFQ تماس
STM32F091CCU6 - 48MHz 256KB Cortex-M0 MCU | STMicroelectronics
STM32F091CCU6

STM32F091CCU6 - 48MHz 256KB Cortex-M0 MCU | STMicroelectronics

The STMicroelectronics STM32F091CCU6 is a 32-bit ARM Cortex-M0 microcontroller with a 48 MHz operating frequency, 256 KB of embedded Flash memory, and 32 KB of SRAM in a 48-pin UFQFPN package. It combines a compact 48-pin surface-mount format with embedded CAN connectivity, 12 timers, ADC, DAC, and CRC capabilities for cost-sensitive embedded control systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The STM32F0 family belongs to the MCU, embedded-controller, and semiconductor hierarchy. The STM32F091CCU6 is particularly useful when a design needs deterministic peripheral control, serial communication, and analog signal handling without requiring the processing power or memory of a higher-end Cortex-M processor. The STM32F091CCU6 operates from 2 V to 3.6 V and executes instructions at up to 48 MHz. Its 256 KB Flash provides room for application firmware, while 32 KB of SRAM supports working data and stack operations. The integrated CRC calculation unit helps protect data integrity in communications and storage-oriented firmware. Its 12 timers support periodic events, input capture, output compare, and other time-based control functions. Embedded CAN is a major technical feature of this device. According to the STMicroelectronics manufacturer datasheet, the CAN interface complies with CAN 2.0A and CAN 2.0B and supports bit rates up to 1 Mbit/s. It can process standard 11-bit identifiers and extended 29-bit identifiers, making the MCU suitable for distributed control and communication nodes that need both protocol flexibility and compact integration. Typical uses include industrial control modules, motor and actuator controllers, building automation endpoints, CAN-connected sensors, and compact data-acquisition units. The ADC and DAC can support analog monitoring and signal generation, while the CAN peripheral simplifies communication with remote nodes. Firmware can also use the timer resources for precise periodic control without depending on an external real-time clock. PCB design should prioritize a short, low-impedance ground return and place decoupling capacitors close to the power pins. The 48-pin exposed-pad UFQFPN requires careful thermal-pad layout and adequate copper area for heat dissipation. Confirm the complete pin assignment, exposed-pad connection, and recommended decoupling network in the manufacturer datasheet before routing the board.

RFQ تماس
STM32F091CCU7 - 48MHz Cortex-M0 MCU | STMicroelectronics
STM32F091CCU7

STM32F091CCU7 - 48MHz Cortex-M0 MCU | STMicroelectronics

STMicroelectronics STM32F091CCU7 is a 32-bit ARM Cortex-M0 microcontroller operating up to 48 MHz, with 256 KB of embedded Flash memory and 32 KB of SRAM, in a 48-pin UFQFPN package measuring 7 x 7 mm. The device combines a compact general-purpose MCU format with CAN connectivity, a 12-timer subsystem, ADC, DAC, and extensive serial peripherals for embedded control applications. A microcontroller is a programmable semiconductor that integrates a CPU core, nonvolatile program memory, volatile data memory, and peripherals such as communications controllers, timers, analog converters, and digital I/O. Within the embedded-system hierarchy, the STM32F091 belongs to STMicroelectronics’ STM32F0 family of 32-bit ARM Cortex-M0 microcontrollers, combining low-complexity control with a broad peripheral set in a surface-mount package. The principal features include a 48 MHz ARM Cortex-M0 RISC core, 256 KB of Flash, and 32 KB of SRAM with hardware parity-CRC capability. The integrated CAN controller supports CAN 2.0A and CAN 2.0B active specifications, including standard 11-bit and extended 29-bit identifiers, with bit rates up to 1 Mbit/s. Twelve timers support timing, PWM, motor-control, and input-capture tasks, while the ADC and DAC reduce the need for external analog components in measurement and signal-generation systems. The STM32F091 architecture is suited to cost-conscious embedded platforms requiring deterministic peripheral access without a high-complexity processor. Its 32-bit Cortex-M0 instruction set supports efficient event handling and control loops, while integrated communication peripherals allow the device to operate as a local CAN controller. The 256 KB Flash capacity is suitable for firmware, configuration data, and application logic, while 32 KB of SRAM supports working state, stacks, buffers, and peripheral data structures. Typical uses include industrial CAN nodes, motor and solenoid controllers, building automation equipment, sensor hubs, actuator interfaces, and compact consumer-control products. The CAN interface is particularly useful when the MCU must exchange cyclic or diagnostic data across a multi-node network. The ADC supports analog measurement, the DAC supports programmable analog output, and the timer bank enables precise timing relationships for motor-drive, lighting, and general-purpose control applications. Board design should account for the dense 7 x 7 mm UFQFPN footprint, exposed-pad thermal requirements, and clean supply routing. Place input and output decoupling capacitors close to the relevant power pins, provide adequate high-frequency return paths beneath the device, and follow the manufacturer’s land-pattern and exposed-pad guidance. Firmware should be validated for startup sequencing, peripheral clock configuration, CAN termination, and analog-reference noise before production release. This product page combines the manufacturer’s technical specification, package information, interface details, sourcing availability, and engineering guidance. It also organizes same-family drop-in candidates by memory and temperature options, helping designers evaluate PCB reuse while recognizing that firmware, qualification, and production validation remain necessary for each replacement decision.

RFQ تماس
STM32F091RBT6 - 48MHz ARM Cortex-M0 MCU 128KB Flash LQFP-64
STM32F091RBT6

STM32F091RBT6 - 48MHz ARM Cortex-M0 MCU 128KB Flash LQFP-64

The STMicroelectronics STM32F091RBT6 is a 32-bit ARM Cortex-M0 microcontroller in the STM32F0 Access line, offering 128 KB Flash, 32 KB SRAM, and a 48 MHz CPU in a 64-pin LQFP (10x10 mm) package. It integrates CAN 2.0B, USB 2.0 Full-Speed (without internal PHY), a 12-bit ADC, a 12-bit DAC, and 12 timers, providing a rich set of peripherals for cost-sensitive embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile and non-volatile memory, and programmable I/O peripherals. The STM32F0 family positions itself as the entry point to ST's Cortex-M0 portfolio, optimized for 8/16-bit replacement by delivering higher performance (48 MHz, 38 DMIPS) at comparable or lower system cost. Within the STM32 taxonomy, the STM32F0 sits below the Cortex-M3/M4 STM32F1/F3 lines and the Cortex-M4/M7 STM32F4 lines; it shares the same STM32 standard peripheral library and STM32CubeMX ecosystem for code portability. Key features of the STM32F091RBT6 include 128 KB Flash with read-while-write support, 32 KB SRAM, a 12-bit 1 MSPS ADC with up to 16 channels, two 12-bit DAC channels, two I2C, two SPI, four USART, one USB 2.0 Full-Speed, one CAN 2.0B, and one HDMI-CEC interface. Operating voltage spans 2.0 V to 3.6 V, with low-power Run, Sleep, Stop, and Standby modes consuming as little as a few microamperes, plus a real-time clock and battery backup domain. Architecturally, the Cortex-M0 core delivers 0.9 DMIPS/MHz using Thumb-2 instructions, paired with a single-cycle multiplier and a Nested Vectored Interrupt Controller (NVIC). The device supports serial-wire debug (SWD) and JTAG, and ST's standard HAL/LL drivers in the STM32Cube ecosystem make firmware migration across STM32 families straightforward. Typical applications include USB HID peripherals, CAN node endpoints in industrial networks, low-cost motor control boards, USB-CDC virtual COM ports, smart sensors, and consumer appliances. The wide operating voltage and integrated CAN make it attractive for both 3.3 V industrial nodes and battery-powered consumer devices. When designing with this MCU, allocate decoupling capacitance of 100 nF per VDD pin plus a bulk 4.7 uF near the regulator, and ensure VDDA/VREF+ filtering for ADC accuracy. For USB, route the DP/DM pair as a 90 ohm differential and use the dedicated USB power-domain pins per the reference manual. This page synthesizes distributor pricing, parametric alternatives, and practical design notes that complement the ST datasheet and reference manual, helping engineers evaluate the STM32F091RBT6 for production BOM decisions.

RFQ تماس
STM32F091RCT6 - Cortex-M0 48MHz 256KB MCU | STMicroelectronics
STM32F091RCT6

STM32F091RCT6 - Cortex-M0 48MHz 256KB MCU | STMicroelectronics

The STMicroelectronics STM32F091RCT6 is a 32-bit ARM Cortex-M0 microcontroller operating at up to 48 MHz with 256 KB of embedded Flash memory and 32 KB of SRAM, housed in a 64-pin LQFP (10x10 mm) surface-mount package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals into one chip, forming the lowest tier of embedded processing hierarchy: MCU -> embedded processor -> system-on-chip. The STM32F091RCT6 belongs to STMicroelectronics' STM32F0 Access Line, the entry-level mainstream family of the broader STM32 portfolio, which spans Cortex-M0 to Cortex-M7 cores and is one of the most widely deployed ARM microcontroller platforms in industrial and consumer electronics. Key features of this device include the ARM Cortex-M0 32-bit RISC core at 48 MHz, 256 KB Flash with ECC option, 32 KB SRAM with hardware parity check, and a rich communication set highlighted by a CAN 2.0B interface - uncommon at this price point - plus up to 8 USARTs, 2 I2C, 2 SPI, and HDMI-CEC. The STM32F091 also integrates a CRC calculation unit, 12-bit ADC with up to 16 channels, DAC, comparators, and flexible clocking with an internal 48 MHz HSI requiring no external crystal. Technically, the F091 implements ST's ART-free Cortex-M0 pipeline with zero-wait-state execution from Flash at 48 MHz, 2.0 V to 3.6 V single-supply operation, and five low-power modes down to stop mode with wake-up on USART. The peripheral multiplexer (SYSCFG) allows flexible routing of digital peripherals to alternate pins, simplifying PCB layout. Typical applications include industrial fieldbus nodes exploiting the CAN interface, motor control and power conversion, building automation sensors, and consumer appliances requiring multiple serial ports. A key design consideration: enable the clock security system (CSS) on HSE and use the internal 48 MHz source for USB or CAN bit timing to remove crystal-related failure modes. This page synthesizes verified distributor data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ تماس
STM32F091VCH6 - 48MHz Cortex-M0 MCU with 256KB Flash | STMicroelectronics
STM32F091VCH6

STM32F091VCH6 - 48MHz Cortex-M0 MCU with 256KB Flash | STMicroelectronics

The STMicroelectronics STM32F091VCH6 is a 32-bit ARM Cortex-M0 microcontroller operating at up to 48 MHz, with 256 KB of Flash memory and CAN connectivity, housed in a 100-pin UFBGA package measuring 7 x 7 mm. It operates from 2.0 V to 3.6 V and is positioned as a mainstream microcontroller for compact embedded control systems. A microcontroller is a semiconductor that integrates a CPU core, program memory, data memory, peripherals, and communication interfaces on one die. Within the product hierarchy, the STM32F091VCH6 is an ARM Cortex-M0 microcontroller, an embedded MCU, and a member of STMicroelectronics' STM32F0 mainstream access family. Its combination of a 48 MHz processor, 256 KB Flash, and extensive peripheral integration supports control-oriented products requiring more capability than very small general-purpose MCUs. Key features identified in the available manufacturer and distributor data include a 32-bit ARM Cortex-M0 core, 48 MHz maximum CPU frequency, 256 KB Flash, CAN support, 12 timers, a 12-bit ADC, a DAC, and communication interfaces. The 100-UFBGA package uses a 7 x 7 mm footprint, making the device suitable for space-constrained boards where a larger leaded or quad-flat package would be inconvenient. The STM32F091VCH6 combines a general-purpose Cortex-M0 processing core with dedicated peripherals for analog measurement, signal generation, timing, and serial communication. Two independent 12-bit converters—one ADC and one DAC—allow a controller to acquire sensor data and generate analog output. The CAN interface supports industrial communication designs where a wired network is preferable to a general-purpose serial interface. Typical applications include industrial sensor controllers, building automation equipment, motor and actuator control, CAN-connected embedded nodes, compact data-acquisition systems, and low-cost consumer devices. Its 256 KB Flash provides room for a bootloader and application firmware, while the 48 MHz CPU supports responsive control loops and communication service tasks. Designers should confirm the exact 100-UFBGA land pattern, exposed-pad requirements, pin multiplexing, and decoupling recommendations against the manufacturer datasheet before layout. Firmware should also account for STM32F0 peripheral behavior, clock configuration, and the operating-voltage limits rather than assuming compatibility with other STM32 families. This product page consolidates verified distributor specifications, application guidance, sourcing information, and strict drop-in replacement analysis. It also distinguishes confirmed same-footprint alternatives from merely similar MCUs, helping engineers avoid confusing electrical equivalence with true PCB-level replaceability.

RFQ تماس
STM32F091VCT6 - 48MHz Cortex-M0 256KB MCU | STMicroelectronics
STM32F091VCT6

STM32F091VCT6 - 48MHz Cortex-M0 256KB MCU | STMicroelectronics

The STMicroelectronics STM32F091VCT6 is a 32-bit ARM Cortex-M0 microcontroller operating at up to 48 MHz, with 256 KB of flash memory, 32 KB of SRAM, and a 100-pin LQFP package measuring 14 mm by 14 mm. It operates from a 2 V to 3.6 V supply and supports 2.5 V and 3.3 V system rails. A microcontroller is a programmable integrated circuit that combines a processor core, nonvolatile program memory, working memory, peripherals, and communication interfaces on one device. The STM32F091VCT6 belongs to STMicroelectronics' STM32F0 access-line family, where the ARM Cortex-M0 core provides a compact architecture for cost-sensitive embedded control. In the product hierarchy, it is a 32-bit microcontroller, embedded processor, and semiconductor intended for general-purpose industrial and consumer electronics. Verified device features include a 48 MHz Cortex-M0 processor, 256 KB of flash organized as 256K by 8 bytes, 32 KB of SRAM, a CRC calculation unit, and CAN connectivity. The 100-pin LQFP-100 package provides a large number of external connections compared with smaller 32-pin or 64-pin devices. This combination is useful when a design requires both substantial local memory and a broad selection of general-purpose I/O. The Cortex-M0 core uses a 32-bit RISC architecture and operates from a 2 V to 3.6 V range. Flash retains programmed firmware when power is removed, while SRAM provides volatile working memory for stack, data, and runtime operations. The CRC unit supports data-integrity calculations, and the available CAN interface is valuable for industrial networking, vehicle subsystems, or embedded control networks requiring a standardized serial bus. Typical applications include industrial automation controllers, CAN-connected equipment, building and access systems, motor-control supervisory logic, and consumer products with a substantial pin requirement. Designers can place the MCU between external sensors, communication transceivers, actuators, and power-conversion stages. The 100-pin package also offers a practical footprint for designs requiring several communications, timer, and general-purpose I/O resources. The primary design consideration is pin and peripheral planning. Before assigning external circuitry, engineers should verify the complete pinout, alternate-function mapping, and electrical limits in the manufacturer documentation. The 2 V to 3.6 V operating range also requires attention to regulator headroom, input filtering, decoupling, and brownout behavior during power transitions. This page combines verified manufacturer and distributor information with package details, pricing context, application guidance, and honest drop-in replacement analysis. The replacement search found one defensible same-package option; other packaging variants and differently pinned devices were intentionally excluded because they would not constitute qualified drop-in replacements.

RFQ تماس
STM32F098RCT6 - 48MHz Cortex-M0 256KB MCU | STMicroelectronics
STM32F098RCT6

STM32F098RCT6 - 48MHz Cortex-M0 256KB MCU | STMicroelectronics

The STMicroelectronics STM32F098RCT6 is a 32-bit Arm Cortex-M0 microcontroller with a 48 MHz CPU, 256 KB of Flash memory, and a 64-pin LQFP package measuring 10 mm by 10 mm. It belongs to the STM32F0 series of low-voltage, mainstream embedded microcontrollers designed for compact control systems requiring efficient performance and a broad peripheral set. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. In the hierarchy of embedded semiconductors, the STM32F098RCT6 is an MCU based on the Arm Cortex-M0 processor, an entry-level 32-bit architecture within the wider Arm Cortex family. The STM32F0 series extends into the broader category of embedded processors and microcontrollers used for industrial controls, consumer equipment, communications, and compact automation. The principal device characteristics include an ARM Cortex-M0 processor operating at 48 MHz, 256 KB of Flash organized as 256K by 8 bits, and operation from low-voltage rails including 1.8 V, 2.5 V, and 3.3 V. Its 64-LQFP package provides 64 external connection points in a 10 mm by 10 mm surface-mount footprint. These characteristics make the device suitable for cost-sensitive embedded products that require more memory and peripheral connectivity than an 8-bit controller. The STM32F098 integrates a high-performance 32-bit core with fast Flash access and a peripheral set intended for general embedded control. Its operating frequency supports responsive control loops, serial communication, data acquisition, and supervisory tasks. The 256 KB Flash capacity accommodates application firmware, configuration data, and boot logic while allowing developers to implement moderate protocol stacks and human-machine-interface functions without relying on external program memory. Typical applications include industrial sensing and control equipment, motor and actuator controllers, communication modules, instrumentation, and compact consumer products. In each case, the MCU can combine real-time control with serial communications and multiple digital inputs or outputs. The STM32F098RCT6 is particularly appropriate when a 48 MHz Cortex-M0 core, 256 KB Flash, and 64-pin LQFP package are required in a space-constrained embedded design. PCB planning should account for the exposed package dimensions, pin pitch, oscillator routing, decoupling, and any communication interfaces used by the design. Place input and output decoupling capacitors close to the appropriate supply pins, keep sensitive clock and signal routes short, and follow the pin-description table in the manufacturer datasheet when assigning tracks. Firmware migration should also confirm startup configuration, peripheral assignment, and low-power behavior. This page combines the core STM32F098RCT6 specifications, qualified same-footprint alternatives, application guidance, and engineering design notes. It is intended to support MCU selection, PCB footprint planning, procurement, and embedded-system architecture without replacing the complete manufacturer datasheet or reference manual.

RFQ تماس