محصولات (46,000+)

STM32F302RDT6 - 72MHz Cortex-M4 MCU | STMicroelectronics
STM32F302RDT6

STM32F302RDT6 - 72MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32F302RDT6 is a 32-bit ARM Cortex-M4 microcontroller with FPU operating at 72 MHz, 384 KB of Flash memory, and a 64-LQFP package measuring 10 x 10 mm. It belongs to the STM32F3 series of mixed-signal microcontrollers and combines a real-time control core with 12-bit analog conversion capability. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and interface circuitry on one package. The STM32F3 family sits within the broader ARM Cortex-M microcontroller hierarchy and is commonly used for real-time control, embedded signal processing, industrial equipment, communications, and sensor-driven systems. Its Cortex-M4 architecture provides deterministic instruction execution while supporting floating-point operations. The STM32F302RDT6 operates at a maximum clock frequency of 72 MHz and includes 384 KB of Flash memory. The device also provides 12-bit ADC and DAC functionality, as identified in the product listing. These resources make it suitable for systems that combine control-loop execution with analog measurement or signal generation. The 64-LQFP package exposes a broad set of general-purpose and peripheral pins in a familiar surface-mount footprint. The STM32F302xD/E family uses an ARM Cortex-M4 32-bit RISC core with an FPU. This architecture is useful for filtering, control calculations, and other numeric operations because the floating-point unit reduces the software and execution burden associated with floating-point arithmetic. The exact RAM capacity, peripheral inventory, supply-voltage limits, and electrical timing values should be confirmed against the manufacturer documentation before final schematic capture. Typical applications include industrial motor and power conversion controllers, instrumentation front ends, communication modules, data acquisition units, and compact embedded control boards. In these systems, the Cortex-M4 core can execute real-time control algorithms while the 12-bit conversion resources support sensor conditioning and process monitoring. A communication interface can connect the controller to a plant network or service port. The most important design step is to assign every pin and peripheral against the manufacturer pin-description and package drawings before PCB layout. Confirm clock, reset, boot, power, and decoupling requirements directly from the STMicroelectronics STM32F302 documentation. This prevents assumptions about multiplexed functions, alternate operating modes, or exposed pad requirements from entering the board design. This product page combines the verified 72 MHz Cortex-M4, 384 KB Flash, 12-bit conversion, and 64-LQFP characteristics with practical application guidance, sourcing information, and component-selection context. It is designed to help engineers identify the correct MCU and verify the mechanical and electrical details needed for a robust embedded design.

RFQ تماس
STM32F302VCT6 - 72MHz Cortex-M4 MCU, 256KB Flash | STMicroelectronics
STM32F302VCT6

STM32F302VCT6 - 72MHz Cortex-M4 MCU, 256KB Flash | STMicroelectronics

STMicroelectronics STM32F302VCT6 is a 32-bit Arm Cortex-M4 mixed-signal microcontroller with a 72 MHz CPU, 256 KB of embedded Flash memory, and a 100-pin LQFP package measuring 14 x 14 mm. The device also includes DSP instructions, a floating-point unit, a memory protection unit, and mixed-signal resources for precision analog measurement. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces into one compact device. Within the embedded-system hierarchy, the STM32F302VCT6 belongs to the STM32F3 family of 32-bit ARM Cortex-M4 MCUs. It combines general-purpose control with fast analog conversion, making it suitable for industrial monitoring, motor-control, sensor acquisition, communications, and compact embedded-control systems. Three headline capabilities define the device. Its 72 MHz Arm Cortex-M4 core provides substantially greater processing capacity than basic 8-bit or 16-bit controllers. Its 256 KB Flash capacity accommodates firmware, boot code, configuration data, and application libraries, while the 40 KB SRAM reported for this device supports working memory and data buffering. The 100-LQFP package provides 100 external connection points for mixed analog, digital, and communication functions. The STM32F302VC product family supports a 12-bit ADC capable of 5 MSPS operation, along with programmable gain amplifiers and comparators. These features enable the MCU to sample and condition analog inputs without relying entirely on external signal-chain components. DSP instructions and the integrated floating-point unit accelerate filtering, transforms, and control calculations, while the memory protection unit supports safer isolation of code and data in more structured firmware environments. Typical applications include industrial sensor nodes, motor-control controllers, data-acquisition systems, power-conversion equipment, communications equipment, and compact embedded platforms. The combination of high-speed conversion and deterministic Cortex-M4 processing is particularly useful when an application must acquire analog measurements and execute control algorithms in one device. PCB design should account for analog and digital return paths, power-supply decoupling, exposed signal-pin limits, and the thermal requirements of the LQFP package. Place the MCU’s decoupling capacitors close to its supply pins, provide clean return paths beneath sensitive analog circuitry, and validate analog-noise performance with the same external network used in production. This product page combines the manufacturer’s device positioning, distributor specifications, lifecycle information, exact-package details, replacement analysis, and practical implementation guidance. It also distinguishes confirmed alternatives from candidates requiring engineering review, helping teams assess fit before committing to a redesign or second-source strategy.

RFQ تماس
STM32F302VEH6 - 72MHz Cortex-M4 512KB MCU | STMicroelectronics
STM32F302VEH6

STM32F302VEH6 - 72MHz Cortex-M4 512KB MCU | STMicroelectronics

The STMicroelectronics STM32F302VEH6 is a 32-bit ARM Cortex-M4 microcontroller with a 72 MHz operating frequency, 512 KB of flash memory, and a 100-UFBGA (7x7 mm) package. It belongs to the STM32F3 mixed-signal MCU family and is designed for embedded control applications requiring fast processing, integrated analog peripherals, and extensive serial connectivity. A microcontroller is a programmable semiconductor device that integrates a processor core, memory, and peripherals on one package. The STM32F3 family combines a real-time Cortex-M4 architecture with mixed-signal resources for industrial, communications, consumer, and instrumentation systems. In the system hierarchy, this MCU belongs to embedded processors, embedded controllers, and semiconductor devices. Verified source data identifies the device with an ARM Cortex-M4 core, 32-bit architecture, 72 MHz operation, and 512 KB flash. Mouser describes the device as a mainstream mixed-signal MCU with an Arm Cortex-M4 core, DSP and FPU capability, and 512 KB flash. The available listing data does not provide RAM size, ADC specifications, GPIO count, operating-temperature limits, or package dimensions, so those values require confirmation from the manufacturer datasheet. The STM32F3 platform is suited to motor-control and embedded-control systems because its Cortex-M4 core supports efficient real-time processing. The 100-UFBGA package provides a compact surface-mount option for high-density PCB layouts, although its fine ball pitch requires careful assembly and inspection. The part is also relevant to communication hubs, sensor nodes, and industrial controllers where multiple mixed-function peripherals can reduce external component count. For designs using STM32F302VEH6, engineers should confirm the exact pin multiplexing, power requirements, peripheral availability, and memory map against the official datasheet before layout release. Firmware migration between STM32 devices should be reviewed for differences in clock configuration, peripheral availability, pin assignments, and startup code. This page consolidates verified distributor availability, package information, technical source links, and selection guidance. It does not infer unverified electrical specifications, and it distinguishes sourced facts from parameters that still require manufacturer confirmation.

RFQ تماس
STM32F302ZDT6 - 72MHz Cortex-M4 384KB MCU | STMicroelectronics
STM32F302ZDT6

STM32F302ZDT6 - 72MHz Cortex-M4 384KB MCU | STMicroelectronics

The STMicroelectronics STM32F302ZDT6 is a 32-bit ARM Cortex-M4 microcontroller with a 72 MHz operating frequency, 384 KB of Flash memory, and a 144-LQFP package measuring 20 mm by 20 mm. It also provides 64 KB of SRAM according to the verified product listing, along with 115 I/O pins for mixed-signal control, communication, and industrial embedded applications. The part belongs to the STM32F3 series and combines a high-performance 32-bit RISC core with an FPU. A microcontroller is a compact embedded-processing system that integrates a CPU, memory, peripherals, and interfaces on one semiconductor device. The STM32F3 family is positioned within the broader hierarchy of ARM Cortex-M microcontrollers, embedded processors, and semiconductor control devices. These components execute firmware for real-time measurement, actuation, communications, motor control, data acquisition, and safety-oriented industrial functions. The Cortex-M4 architecture supports efficient fixed-point and floating-point instruction execution while retaining a broad embedded-software ecosystem. The verified listing identifies the STM32F302ZDT6 as an ARM Cortex-M4 device operating at 72 MHz and storing 384 KB of Flash memory. Its 144-LQFP package exposes 115 I/O, enabling dense mixed-signal designs where analog and digital functions must share a single controller. The STM32F302xD/E family is described by STMicroelectronics as combining the Cortex-M4 core with an FPU. Exact peripheral assignments, voltage limits, temperature limits, and electrical characteristics are not fully present in the supplied data and must be confirmed in the manufacturer documentation. A 72 MHz clock rate supports responsive control loops and timely peripheral servicing. The 384 KB Flash capacity provides room for application firmware, configuration data, and boot logic, while the verified 64 KB SRAM figure supports working memory and data buffering. Compared with a smaller microcontroller package, the 144-LQFP format offers a large pin count and practical routing flexibility for boards requiring numerous external signals. Typical uses include industrial automation controllers, motor-control and digital power systems, data-acquisition equipment, communications gateways, and embedded measurement platforms. The 115-I/O count can be valuable when a design must connect sensors, actuators, converters, displays, and communication transceivers without using multiple controllers. The STM32F302ZDT6 is therefore appropriate where 72 MHz processing, substantial Flash memory, and a high pin count are more important than the smallest possible footprint. Designers should confirm the exact peripheral mix, alternate-function mappings, pin constraints, electrical limits, and startup requirements against the STMicroelectronics product documentation before layout. The large LQFP package is easy to inspect and solder relative to fine-pitch alternatives, but its 144 leads require careful fanout and ground-return planning. Firmware qualification, clock configuration, peripheral initialization, and package-level validation remain essential before production release. This page consolidates verified distributor and manufacturer information with package, procurement, comparison, and design guidance. It is intended to help engineers identify whether the STM32F302ZDT6's 72 MHz core, 384 KB Flash, 64 KB SRAM, and 144-LQFP package fit a new embedded design while clearly separating verified facts from unavailable parameters.

RFQ تماس
STM32F302ZET6 - 72MHz Cortex-M4 MCU, 512KB Flash | ST
STM32F302ZET6

STM32F302ZET6 - 72MHz Cortex-M4 MCU, 512KB Flash | ST

The STMicroelectronics STM32F302ZET6 is a 32-bit ARM Cortex-M4 microcontroller with an FPU, operating at up to 72 MHz and integrating 512 KB of Flash memory in a 144-pin LQFP package measuring 20 x 20 mm. It is designed for embedded applications that require efficient real-time control, mixed-signal processing, and a broad selection of serial and analog peripherals. A microcontroller is a programmable semiconductor device that combines a processor core, memory, and peripherals on one integrated circuit. The STM32F302xD/E family belongs to the ARM Cortex-M4 microcontroller hierarchy, combining RISC-style embedded processing with floating-point capability, on-chip Flash, SRAM, communication interfaces, timers, analog conversion, and GPIO. Its position between simple 8-bit controllers and higher-end application processors makes it suitable for industrial controls, motor systems, communications equipment, and compact embedded products. The STM32F302ZET6's primary headline specifications are its 72 MHz maximum operating frequency, 512 KB of Flash, and 144-LQFP package. The manufacturer describes the family around a high-performance ARM Cortex-M4 core with FPU. Its 2.5 V and 3.3 V operating references make it appropriate for conventional embedded equipment where modern MCU development tools and peripheral-rich mixed-signal designs are required. The large LQFP package also provides extensive external pin access compared with smaller leadless packages. The STM32F302xD/E family combines a 72 MHz Cortex-M4 processor with significant Flash capacity for firmware, configuration data, and application code. The FPU supports efficient single-precision floating-point calculations in control loops and signal-processing workloads. Exact SRAM capacity, peripheral configurations, GPIO count, current consumption, temperature limits, and package dimensions beyond the stated 20 x 20 mm body should be confirmed in the manufacturer datasheet and pin-description tables before release. Typical uses include industrial automation modules, sensor acquisition and control, CAN-based equipment, motor-control peripherals, communications gateways, and compact embedded platforms. The 512 KB Flash capacity allows more application firmware to remain resident than in many entry-level STM32 devices, while the 72 MHz core provides useful timing margin for protocol handling, control logic, and supervisory tasks. PCB design should follow the manufacturer's LQFP-144 land pattern, power, decoupling, clock, and analog-layout recommendations. Confirm the complete pin map, alternate-function assignments, exposed programming and debug interfaces, and unused-pin requirements before schematic capture. For production programs, use the supported ST development toolchain and validate startup, clock configuration, peripheral initialization, and firmware update behavior on the final board. This product page consolidates the confirmed core, frequency, memory, package, and sourcing details with practical selection guidance, pin-validation cautions, and same-family LQFP-144 upgrade options. It also identifies the specification gaps that must still be resolved from the manufacturer datasheet, helping engineers distinguish confirmed device facts from design assumptions.

RFQ تماس
STM32F303C8T6 - 72MHz Cortex-M4 MCU with 64KB Flash | STMicroelectronics
STM32F303C8T6

STM32F303C8T6 - 72MHz Cortex-M4 MCU with 64KB Flash | STMicroelectronics

STMicroelectronics STM32F303C8T6 is an Arm Cortex-M4 32-bit microcontroller with a 72 MHz operating frequency, 64 KB of Flash memory, 16 KB of SRAM, and a 48-LQFP package measuring 7 mm by 7 mm. The device integrates a floating-point unit, two ADCs, three DACs, and CAN connectivity, making it suitable for compact embedded control, industrial monitoring, and communications applications. A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripheral interfaces on one integrated circuit. The STM32F303C8T6 belongs to the STM32F3 family of 32-bit microcontrollers and provides an Arm Cortex-M4 RISC core with hardware floating-point capability. This hierarchy places the device within embedded processors, microcontrollers, and industrial semiconductor control systems. Principal features include a 72 MHz Cortex-M4 core, 64 KB Flash, 16 KB SRAM, two analog-to-digital converters, and three digital-to-analog converters. Its CAN interface supports standard and extended data frames at bit rates up to 1 Mbit/s according to the manufacturer datasheet. The 48-pin LQFP package also provides access to mixed-signal, timer, communication, and general-purpose input/output resources. The Cortex-M4 architecture supports efficient digital signal processing while retaining a broad embedded-control feature set. Hardware floating-point instructions accelerate suitable math operations without requiring a separate DSP. Separate ADC and DAC resources can support measurement and controlled-output systems, while CAN provides a robust option for communication with industrial equipment, sensors, or distributed control nodes. Typical applications include motor and power-system controllers, industrial sensor nodes, CAN-connected machinery, data-acquisition systems, compact instrumentation, and embedded control platforms. The 72 MHz core provides useful timing headroom for concurrent peripheral operation, and the mixed-signal resources reduce the need for external converters in designs that require controlled analog input or output signals. Designers should verify power-supply requirements, decoupling, clock configuration, boot pins, and all 48 package assignments against the official STM32F303C6 datasheet before layout release. Because the supplied verification data confirms the family-level electrical capabilities but does not expose the complete package pin map, the pinout field is intentionally left null rather than reconstructing assignments from memory. Firmware migration should also be checked for peripheral, clock, and startup-support differences. This page consolidates verified manufacturer and distributor information, package details, procurement guidance, comparison fields, and practical engineering cautions. It distinguishes documented facts from unresolved data so engineers can evaluate the STM32F303C8T6 efficiently without mistaking generic cross-reference listings for verified drop-in replacements.

RFQ تماس
STM32F303CBT6 - 32-bit ARM Cortex-M4 MCU, 256KB Flash | STMicroelectronics
STM32F303CBT6

STM32F303CBT6 - 32-bit ARM Cortex-M4 MCU, 256KB Flash | STMicroelectronics

The STMicroelectronics STM32F303CBT6 is a 32-bit ARM Cortex-M4F microcontroller with FPU, operating at up to 72 MHz. It features 256 KB of flash memory and 40 KB of SRAM, packaged in a 48-pin LQFP (7x7 mm) package. This device is part of the STM32F303x6/8/B family, designed for mixed-signal applications requiring high-performance analog peripherals. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit containing a processor core, memory, and programmable input/output peripherals on a single chip. It is the brain of embedded systems, executing firmware to control devices, process sensor data, and communicate with other systems. MCUs are categorized by their core architecture (e.g., ARM Cortex-M), memory size, and peripheral set, and are fundamental to applications ranging from consumer electronics to industrial automation. Key features of the STM32F303CBT6 include a 32-bit ARM Cortex-M4 core with FPU, 72 MHz maximum clock speed, 256 KB flash, 40 KB SRAM, and a rich set of analog peripherals: three 12-bit DACs, four 12-bit ADCs (up to 5 MSPS), seven fast comparators, and operational amplifiers. It also provides advanced timers, a 12-channel DMA controller, and multiple communication interfaces including I2C, SPI, USART, CAN, and USB. The device operates from 2.0V to 3.6V supply and over a -40°C to +85°C temperature range. The STM32F303CBT6 leverages the ARM Cortex-M4 core with single-precision FPU and DSP instructions, enabling efficient execution of complex algorithms such as motor control, digital signal processing, and sensor fusion. The high-speed ADCs (5 MSPS) and fast comparators (25 ns) make it particularly suited for real-time control loops and power conversion applications. Typical applications include motor control (field-oriented control of BLDC/PMSM motors), digital power conversion (SMPS, inverters), industrial automation (PLCs, sensors), medical devices (patient monitoring), and consumer electronics (audio processing, smart appliances). The combination of analog performance and digital processing capability allows designers to integrate multiple functions into a single MCU, reducing BOM cost and board space. When designing with this device, ensure proper decoupling of the VDD and VDDA pins with 100 nF and 4.7 uF capacitors, and connect the VCAP pin to ground with a 2.2 uF capacitor. The BOOT0 pin configuration determines boot source; leave it pulled low for normal flash boot. For high-speed ADC operation, use a stable reference voltage on VREF+ and minimize noise on the analog supply.

RFQ تماس
STM32F303CBT7 - 72MHz Cortex-M4 MCU | STMicroelectronics
STM32F303CBT7

STM32F303CBT7 - 72MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32F303CBT7 is an Arm Cortex-M4 mixed-signal microcontroller with a 72 MHz CPU, 128 KB of Flash memory, and a 48-LQFP 7 x 7 mm package. It combines DSP and floating-point instructions with a 12-bit ADC, programmable gain amplifier, comparators, MPU, and CCM memory. A mixed-signal microcontroller is a semiconductor that integrates digital processing and analog measurement functions on one device. The STM32F303 belongs to the STM32F3 family of 32-bit microcontrollers, combining a real-time control processor with high-resolution analog peripherals. This hierarchy places the device between a general-purpose microcontroller and a dedicated signal-processing controller, allowing compact embedded systems to sample, filter, and control external circuitry without separate analog devices. The device provides 128 KB of Flash for program storage and operates at up to 72 MHz. Its Arm Cortex-M4 core includes DSP instructions and an FPU, which accelerates floating-point calculations and common digital signal-processing operations. The analog subsystem includes a 12-bit ADC capable of 5 MSPS, a PGA, and comparators, while the MPU supports protected task and memory segregation. The manufacturer lists the STM32F303CB as an active mainstream mixed-signal MCU. The STM32F303CBT7 combines a 32-bit Cortex-M4 processing core with extensive mixed-signal peripherals. Its 128 KB Flash configuration provides room for application firmware, calibration tables, and protocol handlers. The 5 MSPS ADC supports sampling of rapidly changing analog signals, while the PGA can condition lower-amplitude inputs before conversion. The FPU and DSP instructions improve the efficiency of filtering, control loops, and sensor-data processing compared with software emulation on a simpler core. Typical uses include industrial motor control, precision sensor acquisition, power-conversion control, communications equipment, and compact industrial instrumentation. The microcontroller can manage control functions while its ADC, PGA, and comparators handle signal acquisition or protection. It is also suitable for connected measurement systems where 128 KB of program memory is sufficient and a 72 MHz control loop is advantageous. PCB design should preserve clean analog and digital return paths around the 7 x 7 mm LQFP package. Place input and decoupling capacitors close to their associated supply pins, route high-current outputs independently from sensitive analog inputs, and maintain adequate thermal copper around the device. Firmware replacement should also verify startup, interrupt, timer, and peripheral compatibility rather than assuming that every MCU in the STM32F3 family is interchangeable. This product overview combines the manufacturer specifications with practical selection criteria, verified package information, same-family drop-in options, and engineering guidance. The comparisons emphasize flash capacity, temperature grade, package fit, and the need for board-level and firmware validation.

RFQ تماس
STM32F303CCT6 - 256KB Flash, 72MHz ARM Cortex-M4F MCU | STMicroelectronics
STM32F303CCT6

STM32F303CCT6 - 256KB Flash, 72MHz ARM Cortex-M4F MCU | STMicroelectronics

The STM32F303CCT6 is a 32-bit ARM Cortex-M4F microcontroller from STMicroelectronics, featuring a 72 MHz CPU with FPU and DSP instructions, 256 KB of Flash memory, and 40 KB of SRAM. It is housed in a 48-pin LQFP package (7x7 mm) and operates over a supply voltage range of 2.0V to 3.6V. This device is part of the STM32F303x6/x8 family, designed for mixed-signal applications requiring high-performance analog peripherals. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals. The STM32F303CCT6 belongs to the STM32F3 series, which is optimized for analog-intensive applications such as motor control, industrial sensors, and power management. The Cortex-M4F core adds a floating-point unit (FPU) and DSP instructions, enabling efficient handling of complex mathematical operations. Key features include a 72 MHz ARM Cortex-M4F core with FPU, 256 KB Flash, 40 KB SRAM, and a rich set of analog peripherals: three 12-bit ADCs (up to 5 MSPS), four 12-bit DACs, seven fast comparators, and programmable gain amplifiers (PGA). It also integrates advanced timers (up to 8 timers), a real-time clock (RTC), and multiple communication interfaces including I2C, SPI, USART, CAN, and USB. The device supports a temperature range of -40°C to +85°C and is available in a 48-pin LQFP package. The STM32F303CCT6 leverages ST's advanced 90nm process technology, providing a balance of performance and power efficiency. The Cortex-M4F core with FPU accelerates signal processing tasks, while the extensive analog peripherals reduce the need for external components. The device includes a memory protection unit (MPU), DMA controller, and a nested vectored interrupt controller (NVIC) for real-time responsiveness. Typical applications include motor control (field-oriented control), industrial automation, medical devices, and consumer electronics. The high-resolution ADCs and fast comparators make it ideal for closed-loop control systems, while the CAN interface supports automotive and industrial networking. The USB interface enables connectivity for data logging and firmware updates. When designing with this device, ensure proper decoupling of the VDD and VDDA pins with 100nF capacitors placed close to the pins. The VDDA pin must be connected to a clean analog supply to achieve the specified ADC performance. Use the internal voltage regulator with external capacitors as recommended in the datasheet to ensure stable operation.

RFQ تماس
STM32F303CCT7 - 72MHz Cortex-M4 MCU, 256KB Flash | STMicroelectronics
STM32F303CCT7

STM32F303CCT7 - 72MHz Cortex-M4 MCU, 256KB Flash | STMicroelectronics

The STMicroelectronics STM32F303CCT7 is a 32-bit Arm Cortex-M4 microcontroller with a 72 MHz CPU, 256 KB of Flash memory, and a 48-pin LQFP package measuring 7 x 7 mm. It belongs to the STM32F3 mixed-signal MCU family and combines a microcontroller with an MPU, CCM, 12-bit ADC, programmable gain amplifier, and comparators. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and interface circuitry on one device. The STM32F3 family sits within the Arm Cortex-M microcontroller hierarchy and combines real-time control performance with analog signal acquisition. STM32F303CCT7 is therefore suited to systems that require both digital computation and direct measurement or conditioning of analog signals. The device operates at up to 72 MHz and provides 256 KB of Flash for firmware and nonvolatile data storage. Its mixed-signal resources include a 12-bit ADC capable of 5 MSPS, a programmable gain amplifier, and comparators. These features support motor-control, industrial monitoring, sensor acquisition, power-conversion control, and embedded signal-processing designs. The manufacturer identifies the STM32F303CC as an active mainstream product. The Cortex-M4 core includes DSP instruction support and a floating-point unit, as indicated by the Arm Cortex-M4F designation used for this device in distributor listings. Mixed-signal integration can reduce the need for separate analog and digital components, but firmware must configure the ADC, comparator, PGA, clock tree, and communications peripherals correctly. Exact peripheral availability, interrupt assignments, and electrical limits should be checked in the manufacturer datasheet before final design release. Typical application blocks include three-phase motor drive, industrial sensor interfaces, digital power conversion, communications modules, and compact embedded control systems. In each case, the 72 MHz processor provides control-loop headroom while the ADC and comparators support feedback and protection functions. The 256 KB Flash capacity also allows substantially larger control programs, lookup tables, and protocol stacks than many entry-level microcontrollers. PCB implementation should preserve the 48-LQFP land pattern, decoupling requirements, clock stability, analog grounding, and exposed-pin assignments defined by STMicroelectronics. Keep analog inputs away from fast digital nets, provide local supply bypassing at the device pins, and follow the recommended external-component network for analog performance. A hardware design should also include the appropriate programming and debug interface for firmware development. This product page combines the exact manufacturer and distributor specifications with engineering guidance on mixed-signal layout, firmware integration, package compatibility, and substitution limits. It also distinguishes a true same-footprint replacement from merely similar STM32 controllers, helping designers protect schedule, PCB compatibility, and production validation when sourcing alternatives.

RFQ تماس
STM32F303RBT6 - 72MHz Cortex-M4F MCU, 128KB Flash | STMicroelectronics
STM32F303RBT6

STM32F303RBT6 - 72MHz Cortex-M4F MCU, 128KB Flash | STMicroelectronics

The STMicroelectronics STM32F303RBT6 is a 32-bit mixed-signal microcontroller built on an Arm Cortex-M4 core with DSP instructions and a hardware floating-point unit, operating at up to 72 MHz, with 128 KB of on-chip Flash memory in a 64-pin LQFP (10 x 10 mm) package. A microcontroller (MCU) is a single integrated circuit that contains a processor core, memory, and a rich set of dedicated peripherals on one die. In the hierarchy of semiconductor components, an MCU sits above a CPU core and below a complete embedded system: it is a general-purpose computing element that reads sensor inputs, runs control algorithms, and drives outputs. The STM32F3 family occupies the mixed-signal middle ground, combining digital real-time control with a high-performance analog front end on the same silicon. Key features include a 12-bit ADC sampling at up to 5 MSPS with programmable gain amplifiers, two 12-bit DAC channels, seven fast rail-to-rail comparators, and four operational amplifiers usable in PGA mode. The device also supports up to 24 capacitive sensing channels for touch keys, linear and rotary sensors, and provides up to 13 timers including one 32-bit timer and two 16-bit motor-control timers. Memory protection unit and CCM core-coupled memory round out the on-chip resources. The Cortex-M4F core runs at 72 MHz with a single-precision FPU and DSP extension, which shortens the cycle count of filtering and control-law math compared with M0/M0+ parts. The analog block is powered from VDDA with its own VSSA reference, so the analog supply can be filtered and decoupled independently of the digital core supply, which measurably improves converter and amplifier performance on mixed-signal boards. Typical applications include sensor-hub and industrial condition-monitoring nodes, motor and stepper drive controllers, low-cost medical instrumentation front ends, capacitive touch interfaces, and compact consumer accessories where the 72 MHz core plus fast ADC replaces a discrete analog front end. When laying out the board, treat VDDA and VSSA as a separate analog island: place the analog supply ferrite bead and 1 uF plus 100 nF capacitors close to pins VDDA and VSSA, and route analog inputs away from switching nodes and the 72 MHz clock net. Use the pin-description and alternate-function tables in the STMicroelectronics datasheet when assigning every pad. This page consolidates the mixed-signal feature set, pin-compatible alternatives from the same STM32F3 family, and hands-on layout and firmware guidance that are not captured on a distributor listing page, so engineers can qualify the part quickly before committing to a design.

RFQ تماس
STM32F303RBT7 - 72MHz Cortex-M4 128KB MCU | STMicroelectronics
STM32F303RBT7

STM32F303RBT7 - 72MHz Cortex-M4 128KB MCU | STMicroelectronics

The STMicroelectronics STM32F303RBT7 is a 32-bit mixed-signal microcontroller based on the Arm Cortex-M4 core, operating at 72 MHz with 128 KB of Flash memory in a 64-LQFP 10 x 10 mm package. It integrates DSP and FPU capabilities, a 12-bit ADC sampling at 5 MSPS, programmable gain amplification, comparators, an MPU, and CCM memory for mixed-signal embedded control designs. A mixed-signal microcontroller is a semiconductor that combines a digital processor with analog acquisition and comparison functions. The STM32F3 product family sits within the broader microcontroller and embedded-processing hierarchy, combining general-purpose control, real-time signal processing, and sensor-interface capabilities. This integration allows one device to control actuators, process sampled analog inputs, and manage communications without requiring a separate analog signal-processing controller. The principal device characteristics include a 72 MHz Cortex-M4 core with DSP and FPU support, 128 KB of programmable Flash, 12-bit ADC operation up to 5 MSPS, an integrated MPU and CCM, PGA functions, and analog comparators. These resources make the device suitable for industrial acquisition, motor-control, and embedded signal-processing systems where sampling rate, computational throughput, and analog integration are important. The Cortex-M4 architecture provides single-precision floating-point operations and DSP instructions that accelerate filtering, transforms, control calculations, and other numerical workloads. The 5 MSPS ADC supports fast analog measurements, while the PGA and comparators reduce the need for separate front-end conditioning or threshold-detection components. The memory-protection unit supports isolation of code and data regions in more structured firmware environments, while CCM offers tightly coupled storage for performance-sensitive routines. Typical applications include industrial motor controllers, precision sensor acquisition, industrial communication gateways, compact data loggers, power-conversion controllers, and embedded measurement instruments. The 64-LQFP package also exposes a conventional leaded footprint that can simplify inspection, prototyping, and assembly processes where very fine-pitch packages are undesirable. PCB implementation should preserve clean analog and digital return paths, place decoupling capacitors close to the supply pins, and route sensitive analog inputs away from high-current switching nodes. The 2.5 V and 3.3 V operating references should be reconciled with the complete power-supply design and every external peripheral before release to production. This product record combines the exact device identity, package details, manufacturer specifications, procurement information, and engineering-oriented comparisons. It also identifies same-brand replacement candidates that require firmware and peripheral-level review rather than treating every 64-pin Cortex-M4 device as an automatic drop-in substitution.

RFQ تماس
STM32F303RCT6 - 256KB Flash, 72MHz Cortex-M4 MCU | STMicroelectronics
STM32F303RCT6

STM32F303RCT6 - 256KB Flash, 72MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32F303RCT6 is a 32-bit ARM Cortex-M4F mixed-signal microcontroller delivering 72 MHz CPU performance with single-precision FPU and DSP instructions, 256 KB of Flash and 40 KB of SRAM, packaged in a 64-pin LQFP (10x10 mm). It operates from 2.0 V to 3.6 V and integrates four 12-bit 5 MSPS ADCs, three 12-bit DACs, four programmable gain amplifiers, seven fast comparators, and two operational amplifiers on-chip. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit that combines a processor core, non-volatile Flash memory, volatile SRAM, and programmable peripherals to govern a specific operation inside an embedded system. Within the broader component taxonomy, an MCU is a type of embedded processor, which is itself a subcategory of integrated circuits. The STM32F303 family further specializes as a mixed-signal MCU, layering high-performance analog front-end blocks (ADCs, DACs, op-amps, comparators) on top of a Cortex-M4 core. Key features of the STM32F303RCT6 include the Cortex-M4F core with FPU and DSP extensions, 256 KB single-bank Flash, 40 KB SRAM including 8 KB hardware-parity SRAM, four 12-bit ADCs capable of 5 MSPS with hardware oversampling, three 12-bit DAC channels, four PGA blocks, seven comparators with 25 ns propagation delay, two op-amps, a true random number generator (TRNG), and four 16-bit timers plus one 32-bit timer for advanced motor-control PWM. Communication interfaces include USB 2.0 Full-Speed, CAN 2.0B, three I2C, three SPI, four USART and two UART blocks. Technically, the STM32F303RCT6 is built on a low-power 90 nm CMOS process. The Cortex-M4F core delivers 1.25 DMIPS/MHz (Dhrystone 2.1) and supports single-cycle MAC plus single-precision IEEE-754 floating point. The interconnect matrix uses an AHB/APB bridge structure; peripherals are clock-gated for low-power modes (Sleep, Stop, Standby, VBAT). The memory protection unit and CCM SRAM (Core-Coupled Memory) enable deterministic zero-wait-state code execution for interrupt routines. Typical applications include field-oriented control (FOC) of brushless DC and permanent-magnet synchronous motors, industrial PLCs and sensor conditioning, digital power conversion (PFC, LLC, full-bridge), medical instrumentation, building automation, and consumer audio processing. The integrated op-amps and comparators eliminate external analog front-end components, lowering BOM cost in motor drive and power stages. When designing with the STM32F303RCT6, provide 100 nF decoupling on each VDD pin placed within 3 mm of the pad, separate VDDA/VDD analog and digital grounds joined at one point, and a 1 uF + 100 nF combination on the VCAP pin. Configure unused I/O as analog inputs to minimize leakage. The TRNG peripheral requires entropy accumulation; consult the RNG application note before cryptographic use.

RFQ تماس
STM32F303RDT6 - 72MHz Cortex-M4 MCU | STMicroelectronics
STM32F303RDT6

STM32F303RDT6 - 72MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32F303RDT6 is a 32-bit ARM Cortex-M4 microcontroller with FPU operating at up to 72 MHz, combining 384 KB of Flash memory with 64 KB of SRAM in a 64-pin LQFP package. It is designed for compact embedded systems that require mixed-signal control, fast peripheral operation, and deterministic real-time processing without an external memory interface. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The STM32F303 belongs to the STM32F3 mixed-signal MCU family, where the ARM Cortex-M4 core sits between general-purpose embedded control and higher-performance digital signal processing. Its floating-point unit accelerates many control, filtering, and signal-transformation operations in real time. Three defining parameters define this controller: a 72 MHz operating frequency, 384 KB of Flash program memory, and a 64-pin LQFP 10 x 10 mm package. The 64 KB SRAM provides working memory for algorithms, communication buffers, and application tasks. The STM32F303xD/E family also provides a mixed-signal feature set intended for industrial control, instrumentation, motor-control, communications, and compact consumer equipment. The Cortex-M4 architecture supports a broad embedded software ecosystem, including C/C++ application code, interrupt-driven control, timer-based sequencing, and communication stacks. Compared with a smaller 8- or 16-bit controller, the 32-bit architecture provides greater address space and arithmetic capacity, while the on-chip Flash and SRAM reduce external component count. At 72 MHz, the MCU can combine control-loop servicing with peripheral data processing rather than offloading every task to an external processor. Typical uses include motor and power-conversion control, measurement front ends, data acquisition units, communication gateways, and compact industrial controllers. Designers can use the mixed-signal peripherals to sample analog inputs, operate timers, generate control signals, and manage communication tasks within a unified device. Firmware and peripheral assignments should be checked against the complete STM32F303xD/E reference documentation before a new PCB is released. A key hardware consideration is decoupling. Place the manufacturer-recommended bulk and high-frequency capacitors close to the corresponding supply pins, preserve the package land pattern, and route sensitive analog and communication signals away from high-current switching nodes. Firmware, clock configuration, peripheral initialization, and pin multiplexing must match the exact pinout in the manufacturer datasheet. This page consolidates the confirmed processor, memory, frequency, package, and sourcing details with practical application guidance, design notes, and engineering comparisons. It also distinguishes verified pin-compatible alternatives from merely similar controllers so engineers can evaluate footprint, memory, peripheral, and lifecycle requirements before committing to a replacement.

RFQ تماس
STM32F303RET6 - 512KB Flash 72MHz Cortex-M4F MCU | STMicroelectronics
STM32F303RET6

STM32F303RET6 - 512KB Flash 72MHz Cortex-M4F MCU | STMicroelectronics

The STMicroelectronics STM32F303RET6 is a 32-bit ARM Cortex-M4F microcontroller running at up to 72 MHz with 512 KB of flash memory, 80 KB of SRAM, and a rich mixed-signal peripheral set, housed in a 64-pin LQFP (10x10 mm, 0.5 mm pitch) package. According to the STMicroelectronics datasheet, it operates from a 2.0V to 3.6V supply over a -40C to +85C industrial temperature range. A microcontroller (MCU) is a compact integrated circuit that combines a processor core, program memory, RAM, and programmable peripherals on a single chip to govern a specific operation in an embedded system. Within the semiconductor taxonomy, the MCU sits under embedded processors, which belong to the broader class of integrated circuits and semiconductors. The STM32F303RET6 belongs to the STM32F3 series, a family specifically optimized for mixed-signal real-time control where analog and digital peripherals must work closely together. Key differentiating features include two fast 12-bit ADCs capable of up to 5 MSPS, three 12-bit DAC channels, seven fast comparators, and an advanced motor-control PWM timer. Communication coverage is broad: CAN 2.0B, USB 2.0 full-speed device, multiple USARTs, SPI, and I2C buses. Two 32-bit timers plus an MPU, DMA controller, and nested vectored interrupt controller (NVIC) round out the real-time capability. Technically, the Cortex-M4F core adds single-precision floating-point hardware and DSP instructions, so control loops and FFT-based analysis execute efficiently without external math coprocessors. The mixed-signal integration significantly reduces external component count and total system cost in digital-power and motor-drive designs. The RET6 suffix denotes 512 KB flash and an industrial -40C to +85C temperature grade in the LQFP-64 package. Typical applications include field-oriented control (FOC) of BLDC and PMSM motors, industrial automation such as PLCs and sensor front ends, digital power conversion (totem-pole PFC, LLC controllers), and medical devices like patient monitors and infusion pumps, where the 5 MSPS ADCs and fast comparators directly support current sensing and protection functions. Design consideration: decouple every VDD pin and the VDDA pin with 100 nF ceramics plus bulk 4.7 uF capacitance placed as close to the pins as possible, and feed VDDA from a filtered analog supply to realize the specified ADC performance. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers procurement and engineering data in one place.

RFQ تماس
STM32F303VBT6 - 72MHz Cortex-M4 MCU | STMicroelectronics
STM32F303VBT6

STM32F303VBT6 - 72MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32F303VBT6 is a 32-bit mixed-signal microcontroller based on the Arm Cortex-M4 core, operating at 72 MHz with 128 KB of Flash memory and DSP and floating-point unit support in a 100-pin LQFP 14 x 14 mm package. It combines a high-performance processor core with a 12-bit ADC capable of 5 MSPS, programmable gain amplification, comparators, MPU, and CCM resources. A mixed-signal microcontroller is a semiconductor device that combines a digital processor and analog or mixed-signal functions in one package. The STM32F3 family belongs to the broader hierarchy of microcontroller, embedded processor, digital controller, and semiconductor product categories. This integration allows a compact embedded design to acquire and process analog measurements while executing control, communication, and monitoring software without requiring several separate devices. The STM32F303VBT6 provides 128 KB of Flash and a 72 MHz CPU with DSP instructions and an FPU. Its 12-bit ADC operates at up to 5 MSPS and includes PGA and comparator resources, making it suitable for fast signal acquisition and control-loop work. The MPU supports controlled memory access for system protection, while the CCM provides fast on-chip memory for performance-sensitive code or data. The 72 MHz Arm Cortex-M4 architecture combines deterministic interrupt-driven operation with single-precision floating-point acceleration and DSP instructions. These capabilities improve computational throughput for motor-control calculations, digital filtering, waveform analysis, and other mixed-signal workloads. The 100-pin LQFP package also provides a substantial pin count for external memory, communications, analog inputs, timers, and debug functions. Typical applications include industrial motor controllers, digital power converters, sensor instrumentation, data acquisition systems, medical monitoring equipment, and compact industrial controls. The fast ADC supports applications that sample rapidly changing analog signals, while the Cortex-M4 FPU and DSP capabilities are valuable in filtering, control, and signal-processing algorithms. When designing around this controller, assign analog and communications pins according to the manufacturer pin-description table, place decoupling capacitors close to the supply pins, and keep high-current or switching nodes away from sensitive analog inputs. Firmware and board bring-up should also verify clock, reset, bootloader, and debug behavior before production programming. This page combines manufacturer specifications, sourcing guidance, application-oriented design guidance, and a package-level comparison framework. The technical details help engineers identify whether the STM32F303VBT6 matches the required memory capacity, processing speed, analog performance, package footprint, and embedded-control feature set.

RFQ تماس
STM32F303VCT6 - 72MHz Cortex-M4 MCU, 256KB Flash | STMicroelectronics
STM32F303VCT6

STM32F303VCT6 - 72MHz Cortex-M4 MCU, 256KB Flash | STMicroelectronics

The STMicroelectronics STM32F303VCT6 is a 32-bit mixed-signal microcontroller with an Arm Cortex-M4 processor, DSP instructions, and a floating-point unit, operating up to 72 MHz and packaged in a 100-pin LQFP. It provides 256KB of flash memory, up to 48KB of SRAM, four 12-bit ADCs, two DAC channels, seven comparators, and mixed-signal peripherals suited to precision measurement and control systems. A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, and peripherals into one device. The STM32F3 family combines general-purpose control with high-speed analog conversion, comparators, timers, communication interfaces, and an Arm Cortex-M4 core. This hierarchy places the device in the embedded microcontroller category, where the MCU executes firmware, samples analog inputs, drives outputs, and communicates with external equipment. Principal features include a 72 MHz maximum CPU frequency, 256KB of embedded flash, up to 48KB of SRAM, and a 12-bit ADC capable of 5 MSPS operation. The device also includes four ADC instances, two DAC channels, seven comparators, programmable gain amplification, DSP support, a floating-point unit, and a memory protection unit. A CAN 2.0A and 2.0B controller supports standard and extended frames at rates up to 1 Mbit/s according to the manufacturer datasheet. The Cortex-M4 architecture supports efficient digital signal processing and floating-point calculations while retaining a low-power embedded operating model. Flash and SRAM provide room for a boot loader, real-time control routines, calibration data, and communications stacks. The dedicated analog resources reduce the need for external converters when designing sensor-conditioning, motor-control, power-monitoring, or industrial measurement boards. Typical applications include motor drives and inverters, industrial data acquisition, programmable logic controllers, power-supply monitoring, battery-management equipment, and CAN-connected embedded controllers. The 100-pin LQFP package exposes the mixed-signal resources and multiple communication functions while remaining compatible with conventional leaded assembly and inspection processes. For PCB design, follow the pin and decoupling recommendations in the manufacturer datasheet, keep analog and digital return paths disciplined, and verify each peripheral instance against the selected pin multiplexing options. Program development also depends on the STM32CubeMX, STM32CubeIDE, and CMSIS device-support packages installed for the STM32F303VC family.

RFQ تماس
STM32F303VET6 - 512KB Flash, 72MHz ARM Cortex-M4F MCU | STMicroelectronics
STM32F303VET6

STM32F303VET6 - 512KB Flash, 72MHz ARM Cortex-M4F MCU | STMicroelectronics

The STMicroelectronics STM32F303VET6 is a high-performance ARM Cortex-M4F based microcontroller with floating-point unit (FPU), operating at up to 72 MHz. It features 512 KB of flash memory and 80 KB of SRAM, making it suitable for a wide range of real-time control and signal processing applications. The device is housed in a 100-pin LQFP package (LQFP100) with a 14x14 mm body and 0.5 mm pitch, offering a compact yet feature-rich solution for embedded systems. What is an ARM Cortex-M4F microcontroller? It is a 32-bit processor core designed for embedded applications that require a balance of performance, power efficiency, and advanced digital signal processing (DSP) capabilities. The 'F' suffix indicates the presence of a hardware floating-point unit (FPU), which accelerates single-precision floating-point arithmetic, essential for control loops, audio processing, and sensor fusion. In the system hierarchy, the STM32F303VET6 sits at the application processor level, integrating the CPU, memory, peripherals, and I/O on a single chip, reducing system cost and board space. Key features of the STM32F303VET6 include a 72 MHz ARM Cortex-M4F core with FPU, 512 KB flash, 80 KB SRAM, and a rich set of peripherals: two advanced 12-bit ADCs (up to 5 MSPS), three 12-bit DACs, seven comparators, four operational amplifiers, and a 12-channel DMA controller. It also integrates multiple communication interfaces: USART, SPI, I2C, CAN, USB, and SDIO. The device supports a supply voltage range of 2.0V to 3.6V and operates over a temperature range of -40°C to +85°C (industrial grade). The STM32F303VET6 is built on ST's advanced 90nm process technology, offering a good balance of performance and power consumption. The Cortex-M4F core with FPU and DSP instructions enables efficient execution of complex algorithms, such as PID control, FFT, and digital filtering. The device also features a memory protection unit (MPU) and a nested vectored interrupt controller (NVIC) for robust real-time operation. Typical applications include industrial motor control, power conversion, digital power supplies, three-phase inverters, medical devices, and audio processing. The high-speed ADCs and comparators make it ideal for fast closed-loop control systems, while the FPU accelerates mathematical computations. The device is also well-suited for IoT edge nodes that require local signal processing. When designing with the STM32F303VET6, ensure proper decoupling of the VDD and VDDA pins with 100nF and 4.7uF capacitors, and connect the VCAP pins to ground with 2.2uF capacitors for internal regulator stability. The BOOT0 pin configuration determines the boot source; a 10k pull-down resistor is recommended for normal flash boot. For high-speed ADC applications, use a low-impedance analog supply and reference to minimize noise.

USD $3.50 تماس
STM32F303VET7 - 72MHz Cortex-M4 512KB MCU | STMicroelectronics
STM32F303VET7

STM32F303VET7 - 72MHz Cortex-M4 512KB MCU | STMicroelectronics

The STMicroelectronics STM32F303VET7 is a 32-bit ARM Cortex-M4 microcontroller operating at 72 MHz, with 512 KB of Flash memory and a 100-pin LQFP package measuring 14 x 14 mm. It operates from a 2.5 V to 3.3 V supply and is designed for embedded control applications requiring high-performance mixed-signal processing. A microcontroller integrates a processor core, nonvolatile program memory, volatile data memory, peripheral interfaces, and control logic on one semiconductor device. The STM32F303VET7 belongs to STMicroelectronics’ STM32F3 family, where the ARM Cortex-M4 core provides 32-bit instruction execution and floating-point capability. This places the device within the embedded microcontroller hierarchy used for industrial controls, motor-control systems, instrumentation, and consumer equipment. The headline specifications are a 72 MHz operating frequency, 512 KB of Flash organized as 512K x 8 bits, and a 100-LQFP package. The STM32F303xD/E family combines the Cortex-M4 processor with mixed-signal peripherals intended for applications that demand both control performance and accurate analog measurement. A 3.3 V operating supply supports integration into conventional embedded industrial and commercial equipment. The STM32F303VET7 is a member of the STM32F303xD/E family, which is based on the high-performance ARM Cortex-M4 32-bit RISC core with an FPU. Its 72 MHz clock capability provides additional compute margin for control loops, communication tasks, and signal-processing workloads compared with lower-frequency general-purpose microcontrollers. The large 512 KB Flash region can accommodate application firmware, configuration data, and boot code while maintaining a compact 100-pin package. Typical uses include industrial automation, sensor acquisition, motor and power-system control, communication equipment, test and measurement instruments, and compact embedded platforms. The MCU can be positioned as the central controller in a design that reads analog inputs, executes control algorithms, drives external actuators, and communicates with supervisory electronics. Its 3.3 V supply and 72 MHz performance make it especially suitable for industrial signal-chain applications. Designers should treat the 100-LQFP footprint as a 0.5 mm-pitch package and plan decoupling, programming access, reset behavior, clock configuration, and peripheral routing on the PCB before layout. Because firmware configuration and peripheral requirements vary across STM32F303 designs, verify the exact peripheral assignments, alternate-function mappings, and startup requirements in the manufacturer pin-description and reference-manual tables before releasing production firmware. This product record combines the official family specifications, package identification, sourcing information, temperature-grade comparison, and practical PCB guidance in one engineering reference. It is intended to help designers evaluate the STM32F303VET7 for 3.3 V embedded systems and determine whether an existing STM32F303 board can be reused without changing its 100-LQFP footprint.

RFQ تماس
STM32F303ZDT6 - 72MHz Cortex-M4 MCU, 384KB Flash | ST
STM32F303ZDT6

STM32F303ZDT6 - 72MHz Cortex-M4 MCU, 384KB Flash | ST

The STMicroelectronics STM32F303ZDT6 is a 32-bit ARM Cortex-M4 microcontroller with a 72 MHz operating frequency, 384 KB of Flash memory and a 144-pin LQFP package measuring 20 mm by 20 mm. It combines a high-performance mixed-signal control platform with extensive general-purpose peripherals for industrial, embedded-control and motor-drive designs. A microcontroller is a programmable semiconductor device that integrates a processor core, memory and peripheral interfaces onto one package. Within the embedded-control hierarchy, the STM32F3 family sits between the general-purpose ARM Cortex-M MCU category and specialized mixed-signal control devices. The STM32F303ZDT6 is suitable when deterministic real-time control, fast analog-related peripherals and a broad set of communication interfaces must coexist in a single device. Key characteristics include an ARM Cortex-M4 core operating at up to 72 MHz, 384 KB of Flash memory and 64 KB of SRAM. The device provides mixed-signal capabilities, an FPU and DSP instructions, while its 144-LQFP package exposes a high pin count for analog inputs, timers, communication ports and general-purpose I/O. The industrial temperature indication and 3.3 V operating class make the part suitable for embedded industrial equipment rather than ultra-low-cost hobby designs. The STM32F3 architecture is intended for real-time signal generation, motor control, power conversion and precision measurement. Its fast Cortex-M4 execution engine supports floating-point and digital signal-processing workloads, reducing the need for a separate DSP in moderate control systems. The 384 KB Flash capacity provides room for application firmware, parameter tables and boot code, while the 64 KB SRAM supports control loops and communication buffers. Typical applications include motor controllers, digital power supplies, industrial sensor nodes, data acquisition systems, communications equipment and mixed-signal instrumentation. The large LQFP package makes the device particularly useful when a design requires numerous exposed analog and digital functions rather than the smallest possible footprint. Use the manufacturer pin-description and pinout tables when assigning PCB nets, and confirm every peripheral instance, alternate function and analog input before routing. Decoupling, grounding and analog-signal layout remain critical because fast digital activity can degrade measurement accuracy in sensitive analog channels. This page combines the verified device identity, package and memory information with application guidance, comparison parameters and practical design considerations to support faster component selection and PCB planning.

RFQ تماس
STM32F303ZET6 - 512KB Flash ARM Cortex-M4F MCU | STMicroelectronics
STM32F303ZET6

STM32F303ZET6 - 512KB Flash ARM Cortex-M4F MCU | STMicroelectronics

The STMicroelectronics STM32F303ZET6 is a high-performance 32-bit ARM Cortex-M4F microcontroller with floating-point unit (FPU), operating at up to 72 MHz. It integrates 512 KB of flash memory and 64 KB of SRAM, making it suitable for complex control and signal processing applications. The device is housed in a 144-pin LQFP package (LQFP144) with a 20x20 mm body and 0.5 mm pitch, providing extensive I/O and peripheral connectivity. What is an ARM Cortex-M4F microcontroller? It is a 32-bit processor core designed for embedded control applications, featuring a floating-point unit (FPU) for efficient handling of mathematical operations, DSP instructions for digital signal processing, and a memory protection unit (MPU) for enhanced system reliability. The Cortex-M4F is part of the ARM Cortex-M family, which includes the M0, M0+, M3, M4, and M7 cores, each optimized for different performance and power trade-offs. In the system hierarchy, the microcontroller sits between the application software and the physical hardware, executing instructions and managing peripherals such as timers, ADCs, and communication interfaces. Key features of the STM32F303ZET6 include a 72 MHz maximum clock speed, 512 KB flash, 64 KB SRAM, and a rich set of peripherals: 4x 12-bit ADCs with up to 5 MSPS, 2x 12-bit DACs, 7x comparators, 4x operational amplifiers, 3x 16-bit advanced-control timers, 2x 32-bit timers, and multiple communication interfaces (SPI, I2C, USART, CAN, USB). The device also features a true random number generator (RNG), a CRC calculation unit, and a 12-channel DMA controller. The FPU accelerates single-precision floating-point arithmetic, which is critical for control loops and sensor fusion algorithms. Technically, the STM32F303ZET6 is built on a 90nm process technology, offering a balance of performance and power efficiency. It operates from a 2.0V to 3.6V supply and features multiple low-power modes (Sleep, Stop, Standby) to minimize energy consumption in battery-powered designs. The device includes a comprehensive clock system with an internal 8 MHz RC oscillator, an internal 32 kHz RC oscillator, and support for external crystals up to 32 MHz. The ADC can operate in dual or triple interleaved mode to achieve higher sampling rates, and the comparators and op-amps enable analog signal conditioning without external components. Typical applications include motor control (field-oriented control of brushless DC motors), industrial automation (PLC, sensors, actuators), medical devices (patient monitoring, infusion pumps), and consumer electronics (audio processing, smart home controllers). The combination of analog peripherals and DSP capabilities makes it ideal for applications requiring both signal conditioning and real-time control. When designing with this device, ensure adequate decoupling of the power supply pins (VDD, VDDA) with 100nF and 4.7uF capacitors placed close to the pins. The VDDA pin must be connected to a clean analog supply to achieve the specified ADC accuracy. Also, configure the boot pins correctly to select the desired boot source (flash, system memory, or SRAM) during development.

RFQ تماس
STM32F303ZET7 - 72MHz Cortex-M4 MCU | STMicroelectronics
STM32F303ZET7

STM32F303ZET7 - 72MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32F303ZET7 is a 32-bit ARM Cortex-M4 microcontroller with a floating-point unit, a 72 MHz maximum clock, 512 KB of flash memory, and 64 KB of SRAM in a 144-pin LQFP package measuring 20 mm by 20 mm. The STM32F303xD/E family combines mixed-signal control capability with a high-performance Cortex-M4 core for demanding embedded control systems. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, peripherals, and interface blocks on one silicon device. The STM32F3 family belongs to the 32-bit ARM Cortex-M4 MCU category and supports real-time control, data acquisition, communications, and motor-control workloads. Its hardware floating-point unit accelerates arithmetic operations without requiring a separate digital signal processor. Principal features include a 72 MHz operating frequency, 512 KB of internal flash, 64 KB of SRAM, 32-bit architecture, and a 144-pin LQFP package. The STM32F303ZET7 also provides the mixed-signal resources associated with the STM32F303xD/E family, including analog-to-digital and digital-to-analog converters, timers, communication interfaces, and general-purpose I/O for connected industrial equipment. At the instruction level, the Cortex-M4 core combines a streamlined Thumb-2 instruction set with pipeline behavior suited to embedded control loops. Hardware floating-point acceleration is particularly useful in motor-control, power-conversion, and sensor-processing algorithms because it reduces the computational overhead associated with real-time numerical operations. Firmware portability is supported through the STM32 ecosystem and ARM Cortex-M development tools. Typical applications include industrial motor controllers, digital power supplies, programmable logic controllers, data-acquisition systems, building automation equipment, and communication-oriented control boards. The 144-pin package provides a high I/O count for mixed analog and digital designs while keeping the board assembly process compatible with standard surface-mount LQFP tooling. For PCB layout, place all decoupling capacitors beside their associated VDD and VDDA pins, keep analog inputs away from high-current switching nodes, and route clock and communications signals away from noisy power converters. Confirm the exact peripheral pin assignment, alternate-function settings, and analog-input limits in the manufacturer pin-description table before finalizing routing. This page combines manufacturer-device details, package information, replacement options, and application-specific engineering guidance to support component selection and board bring-up for the STM32F303ZET7.

RFQ تماس
STM32F334C6T6 - 72MHz Cortex-M4 32KB MCU | STMicroelectronics
STM32F334C6T6

STM32F334C6T6 - 72MHz Cortex-M4 32KB MCU | STMicroelectronics

The STMicroelectronics STM32F334C6T6 is a 32-bit Arm Cortex-M4 microcontroller operating at up to 72 MHz, with 32 KB of Flash memory, 16 KB of SRAM, and a 48-pin LQFP 7 x 7 mm package. It combines a high-performance mixed-signal Cortex-M4 core with floating-point capability, high-resolution timers, and analog peripherals for compact embedded control systems. A microcontroller is a programmable semiconductor that integrates a CPU, memory, timers, communication interfaces, and analog or digital peripherals onto one device. The STM32F334C6T6 belongs to the STM32F3 mixed-signal MCU family, combining an Arm Cortex-M4 processor with resources suited to precision timing, signal measurement, communications, and industrial control. Its 32-bit architecture supports efficient control processing while the mixed-signal features expand design flexibility. The principal specifications include an operating frequency of up to 72 MHz, 32 KB of Flash for embedded firmware, and 16 KB of SRAM for working memory. The device also provides high-resolution timer resources and mixed-signal functionality. These characteristics make it suitable for motor-control, power-conversion, industrial automation, sensing, and embedded communication designs where both real-time processing and analog-related peripherals are required. The STM32F334x4/6/8 family uses the Arm Cortex-M4 32-bit RISC core, with floating-point hardware embedded in the core as described by the manufacturer. Its 48-LQFP package exposes 48 peripheral and power pins, supporting integration into conventional surface-mount PCB layouts. Compared with a smaller 32-pin or 20-pin package, the 48-pin arrangement provides additional interface and analog connectivity without requiring the larger lead pitches associated with some high-pin-count packages. Typical applications include digital power supplies, motor controllers, industrial sensor nodes, PLC and automation peripherals, communications equipment, and compact embedded instruments. A design can use the Cortex-M4 core for control algorithms, the timers for precise switching or sampling, and the SRAM for working buffers. The 32 KB Flash capacity suits firmware with focused application logic rather than large graphical or storage-intensive workloads. Designers should verify the complete pin assignment, operating limits, peripheral configuration, and power requirements against the manufacturer datasheet before layout or firmware release. In particular, preserve the recommended decoupling arrangement near the supply pins and validate analog-source impedance, timer inputs, clock configuration, and unused-pin treatment in the final PCB design. This page combines verified manufacturer and distributor information, package and application context, pricing, drop-in candidate analysis, and practical engineering guidance. It is intended to help engineers assess STM32F334C6T6 suitability for embedded control designs and compare potential replacements without treating package similarity alone as proof of functional interchangeability.

RFQ تماس
STM32F334C6T7 - 72MHz Cortex-M4 MCU | STMicroelectronics
STM32F334C6T7

STM32F334C6T7 - 72MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32F334C6T7 is a 32-bit Arm Cortex-M4 microcontroller operating up to 72 MHz, with 32 KB of Flash memory, 16 KB of SRAM, and a 48-LQFP 7 x 7 mm package. It combines a floating-point-capable Cortex-M4 processor with integrated analog and timing resources for compact embedded-control systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and interfaces onto one device. The STM32F334C6 belongs to the STM32F3 family of 32-bit embedded microcontrollers, where the Cortex-M4 core provides deterministic real-time instruction execution alongside event-driven peripheral handling. STM32F334C6T7 is suited to applications requiring compact packaging, moderate program memory, fast control-loop execution, and mixed-signal measurement. Key device characteristics include a 72 MHz maximum core frequency, 32 KB Flash organized as 32K x 8, 16 KB SRAM, and a 3.3 V operating class as identified for the STM32F334C6T7. The STM32F334 family also incorporates two ADCs, three DAC channels, and three comparators, providing useful resources for signal acquisition, analog output, and threshold-based control. Its 48-pin LQFP package exposes a broad set of digital and analog functions while remaining suitable for conventional leaded assembly. The Cortex-M4 architecture supports efficient digital signal processing with single-precision floating-point capability. Its 72 MHz operating point allows control calculations, peripheral servicing, and communication handling to coexist in compact embedded designs. Combined with the STM32F334 family's analog peripherals, the device can reduce external component count in sensor, actuator, and instrumentation designs by consolidating measurement, comparison, and waveform-generation functions. Typical uses include industrial sensor modules, motor and actuator controllers, compact power-conversion controllers, measurement instruments, and embedded IoT equipment. The 32 KB Flash capacity is most appropriate for firmware with focused real-time control rather than extensive graphical interfaces or large data storage. The 16 KB SRAM can hold working state, communication buffers, and interrupt-handling data without requiring external memory in typical designs. PCB design should preserve clean analog grounding, route sensitive analog inputs away from fast switching edges, and place decoupling capacitors close to the appropriate supply pins. Designers should also review the manufacturer datasheet for the exact pin assignments, startup requirements, clock limits, and unused-pin treatment before releasing a layout. This product record combines the manufacturer product identity, distributor package and memory details, replacement analysis, and application-focused engineering guidance. It supports faster qualification by connecting the Cortex-M4 performance, 32 KB Flash capacity, 16 KB SRAM, analog resources, and 48-LQFP footprint to practical design decisions.

RFQ تماس