مدارهای مجتمع

ATSAM4S4AA-MU

ATSAM4S4AA-MU - 120MHz Cortex-M4, 256KB MCU | Microchip

The Microchip Technology ATSAM4S4AA-MU is a 32-bit ARM Cortex-M4 microcontroller with FPU operating at up to 120 MHz, integrating 256KB of single-cycle flash memory and 64KB of SRAM in a 48-pin QFN (7x7 mm) exposed-pad package. It runs from a 1.62V to 3.6V supply and integrates an 8-channel 12-bit ADC, making it suitable for mixed-signal embedded systems. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals into one chip. Within the semiconductor hierarchy, the SAM4S sits in the 32-bit flash MCU family, part of the broader ARM Cortex-M ecosystem that spans everything from low-power sensor nodes to industrial control boards. Microchip acquired Atmel in 2016, so the SAM4S series datasheets are published under the Microchip Technology name. Key differentiating features of the ATSAM4S4AA-MU include the Cortex-M4 core with hardware DSP instructions and single-precision FPU, a maximum clock speed of 120 MHz, 256KB of in-system-programmable flash, and low-power operation as low as 180 uA in backup-related modes per the Microchip product page. The device also provides standard SAM4S peripherals such as UART/USART, SPI, TWI (I2C), PWM channels, and DMA for offloading data movement from the CPU. Architecturally, the SAM4S series is based on the ARMv7E-M Cortex-M4 core with a Harvard bus structure, providing deterministic single-cycle flash access with cache/accelerator layers that sustain full-speed execution at 120 MHz. The Cortex-M4 DSP extension accelerates MAC and SIMD operations useful in motor control, digital filtering, and sensor fusion workloads. Typical applications include industrial automation nodes, motor control, consumer appliances, IoT sensor gateways, and portable battery-powered instruments, where the combination of 256KB flash and a 12-bit ADC reduces external component count. The SAM4S series offers pin-to-pin compatibility with SAM4N, SAM3S, SAM3N, and SAM7S devices, easing memory and performance migration. When designing with this MCU, budget the flash for bootloader plus application and verify that 64KB SRAM is sufficient for DMA buffers and stacks; for heavier DSP workloads consider the FPU-enabled build options. This page synthesizes distributor pricing, pin-compatible alternatives, and design guidance not found in the manufacturer datasheet alone.

RFQ تماس

ATSAM4S4AB-AN

ATSAM4S4AB-AN - Cortex-M4 120MHz 256KB MCU | Microchip

The Microchip Technology ATSAM4S4AB-AN is a 32-bit ARM Cortex-M4 microcontroller running at up to 120 MHz with 256KB (256K x 8) of embedded Flash memory, housed in a 48-pin LQFP (7x7 mm) surface-mount package rated for the industrial temperature range of -40C to +105C. It belongs to the SAM4S family of high-performance, low-power MCUs from Microchip (formerly Atmel). A microcontroller (MCU) is a single integrated circuit that combines a processor core, program memory, data RAM, and a rich set of peripherals into one chip, forming the backbone of embedded systems. Within the voltage-regulator-like hierarchy of embedded components, the SAM4S sits at the mid-to-high tier of Microchip's ARM-based MCU portfolio, positioned above the Cortex-M0+ SAMD series and pin-compatible with the SAM7S, SAM3N, SAM3S, and SAM4N families, enabling straightforward migration between price/performance points. Key features of the ATSAM4S4AB-AN include the 120 MHz Cortex-M4 core with DSP instructions, 256KB of Flash program memory, on-chip connectivity peripherals (I2C/TWI, SPI, UART/USART, SSC, USB 2.0 device, IrDA, and memory-card interfaces), and system peripherals such as DMA, PWM, watchdog timer (WDT), brown-out detect/reset, and power-on reset (POR). The device provides 34 general-purpose I/O pins in the 48-LQFP footprint. Architecturally, the Cortex-M4 core features a 3-stage pipeline and single-cycle MAC, giving efficient signal-processing capability for motor control and digital filtering. The Flash accelerator minimizes wait-state penalties at full 120 MHz operation, while the multi-layer bus matrix and DMA allow peripherals to move data without core intervention, reducing real-time latency. Typical applications include industrial automation and control nodes, consumer appliances, USB-connected instrumentation, and motor-control or touch-sensing systems using Microchip QTouch technology, which is natively supported by the SAM4S peripheral set. A key design consideration is power budgeting: at 120 MHz, active current is substantially higher than in low-speed sleep modes, so designers should exploit the SAM4S sleep, wait, and backup modes to hit energy targets in battery-powered designs. This page synthesizes distributor pricing, drop-in same-family alternatives, application guidance, and design notes not found in the manufacturer datasheet.

RFQ تماس

ATSAM4S4AB-ANR

ATSAM4S4AB-ANR - 120MHz Cortex-M4 256KB MCU | Microchip

The Microchip Technology ATSAM4S4AB-ANR is a 32-bit ARM Cortex-M4 flash microcontroller running at up to 120 MHz with 256 KB of embedded flash and 64 KB of SRAM, housed in a 48-pin LQFP (7x7 mm) surface-mount package on tape and reel. A microcontroller unit (MCU) is a single-chip computer that integrates a processor core, memory, and programmable peripherals on one die, sitting within the broader hierarchy of embedded processors beneath MPUs and application processors. The SAM4S family belongs to Microchip (formerly Atmel) ARM-based flash MCUs, positioned for cost-sensitive embedded control where a 32-bit core, DSP instructions, and a rich peripheral set are required in a small footprint. Key features include the Cortex-M4 core with DSP extension and a single-cycle hardware multiplier/floating-point capable instruction set, 120 MHz maximum CPU frequency, 256 KB (256K x 8) of flash memory for code storage, and an industrial temperature grade of -40C to +105C. The device operates from a single supply in the 1.62V to 3.6V range with a nominal 3.3V rail. The SAM4S architecture provides an extensive peripheral set for connectivity, system control, and analog interfacing, including UART/USART serial channels, SPI, TWI (I2C), timers, PWM, an ADC, and a DMA controller for data movement without CPU intervention. Native support for Microchip QTouch capacitive touch technology enables buttons, sliders, and wheels without external components. Per the SAM4S family product page, the family is pin-to-pin compatible with Microchip SAM7S, SAM3N, SAM4N, and SAM3S MCUs, simplifying migration across memory and performance tiers within the same PCB footprint. Typical applications include industrial automation and control nodes, consumer and IoT devices with capacitive touch interfaces, motor control and power conversion, and embedded connectivity bridges where a 120 MHz 32-bit core with DMA-accelerated serial transfers is beneficial. When designing with this device, budget the flash for bootloader plus application and consider the pin-compatible larger-memory SAM4S variants for upgrade headroom. Follow Microchip layout guidance for decoupling and VDDIO/VDDCORE domains. This page synthesizes verified distributor pricing, drop-in alternatives within the pin-compatible SAM4S/SAM3S ecosystem, and practical design notes not found in the manufacturer datasheet.

RFQ تماس

ATSAM4S4AB-MN

ATSAM4S4AB-MN - 120MHz Cortex-M4 MCU 256KB Flash | Microchip

The Microchip Technology ATSAM4S4AB-MN is a 32-bit ARM Cortex-M4 flash microcontroller operating at up to 120 MHz, with 256 KB of embedded flash memory and 64 KB of SRAM, housed in a 48-pin QFN (7x7 mm) exposed-pad package rated from -40C to +105C. A microcontroller unit (MCU) integrates a processor core, memory, and peripherals on a single chip, sitting at the device level of the embedded-systems hierarchy: integrated circuit -> microcontroller -> embedded control system. The SAM4S series belongs to Microchip's (formerly Atmel) SMART ARM-based MCU family, positioned for cost-sensitive, high-performance embedded control. Key features include the ARM Cortex-M4 core with DSP instructions and a single-cycle hardware MAC, a full-speed USB 2.0 Device port with embedded transceiver, a 12-bit ADC, and pin-to-pin compatibility with the SAM7S, SAM3S, SAM3N, and SAM4N MCU families. The device operates from a single 1.62V to 3.6V supply and supports Microchip QTouch capacitive touch technology natively. Technically, the SAM4S integrates a flash accelerator and optional cache to sustain near-zero-wait-state execution at 120 MHz, plus a rich peripheral set covering UART/USART, SPI, TWI (I2C), PWM timers, and a real-time clock, enabling connectivity, system control, and analog interfacing in one chip. Typical applications include industrial automation nodes, consumer appliances, motor control, USB-enabled sensing devices, and capacitive-touch human-machine interfaces where 120 MHz headroom and flash density up to 256 KB are required. Design consideration: the 48-QFN exposed pad must be soldered to a grounded copper pour for thermal dissipation and signal integrity; plan decoupling capacitors on all VDDIO/VDDCORE pairs per the datasheet power scheme. This page synthesizes verified distributor pricing, drop-in SAM4S family alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ تماس

ATSAM4S4AB-MNR

ATSAM4S4AB-MNR - 120MHz Cortex-M4 MCU 256KB Flash | Microchip (Tape & Reel)

The Microchip Technology ATSAM4S4AB-MNR is a 32-bit ARM Cortex-M4 flash microcontroller operating at up to 120 MHz, with 256 KB of embedded flash memory and 64 KB of SRAM, housed in a 48-pin QFN (7x7 mm) exposed-pad package rated from -40C to +105C. A microcontroller unit (MCU) integrates a processor core, memory, and peripherals on a single chip, sitting at the device level of the embedded-systems hierarchy: integrated circuit -> microcontroller -> embedded control system. The SAM4S series belongs to Microchip's (formerly Atmel) SMART ARM-based MCU family, positioned for cost-sensitive, high-performance embedded control. Key features include the ARM Cortex-M4 core with DSP instructions and a single-cycle hardware MAC, a full-speed USB 2.0 Device port with embedded transceiver, a 12-bit ADC, and pin-to-pin compatibility with the SAM7S, SAM3S, SAM3N, and SAM4N MCU families. The device operates from a single 1.62V to 3.6V supply and supports Microchip QTouch capacitive touch technology natively. Technically, the SAM4S integrates a flash accelerator and optional cache to sustain near-zero-wait-state execution at 120 MHz, plus a rich peripheral set covering UART/USART, SPI, TWI (I2C), PWM timers, and a real-time clock, enabling connectivity, system control, and analog interfacing in one chip. Typical applications include industrial automation nodes, consumer appliances, motor control, USB-enabled sensing devices, and capacitive-touch human-machine interfaces where 120 MHz headroom and flash density up to 256 KB are required. Design consideration: the 48-QFN exposed pad must be soldered to a grounded copper pour for thermal dissipation and signal integrity; plan decoupling capacitors on all VDDIO/VDDCORE pairs per the datasheet power scheme. This page synthesizes verified distributor pricing, drop-in SAM4S family alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ تماس

ATSAM4S4BA-AN

ATSAM4S4BA-AN - 120MHz Cortex-M4 256KB MCU | Microchip

The Microchip Technology ATSAM4S4BA-AN is a 32-bit Arm Cortex-M4 microcontroller operating at 120MHz, with 256KB of flash program memory and 64KB of RAM in a 64-pin LQFP package. It operates from 1.2V to 3.3V and is identified as a green, industrial-temperature device. The combination of processing performance, memory capacity, and package size makes it suitable for embedded control, communication, and data-acquisition systems. A microcontroller is a semiconductor that integrates a processor core, nonvolatile program memory, volatile data memory, peripherals, and I/O in one device. The ATSAM4S4BA-AN belongs to the SAM4S family, where the Arm Cortex-M4 core provides 32-bit instruction execution while integrated peripherals reduce the component count required for an embedded system. In system terminology, it is a microcontroller within the broader category of embedded processors and semiconductors. Its headline characteristics are a 120MHz operating frequency, 256KB flash memory, 64KB RAM, and a 64-pin LQFP package. Flash retains firmware without continuous power, while RAM supports working data, stack operations, and communication buffers. The stated 1.2V to 3.3V operating range permits integration with common low-voltage embedded systems, while the industrial-temperature designation supports designs expected to operate outside consumer-temperature environments. The Arm Cortex-M4 architecture is suitable for interrupt-driven control and real-time peripheral management. At 120MHz, the processor provides substantially more instruction throughput than lower-clock Cortex-M devices, although actual response time depends on interrupt latency, peripheral configuration, firmware architecture, and memory access patterns. The 64KB RAM should be evaluated carefully for graphics, large protocol buffers, or multi-stage data processing rather than assuming that the flash capacity can substitute for working memory. Typical uses include industrial automation modules, sensor-hub controllers, communication equipment, embedded gateways, and compact control boards. In a sensor hub, the microcontroller can acquire measurements, filter data, apply protocol conversion, and manage local status indicators. In industrial equipment, its operating voltage, industrial-temperature designation, and integration level can reduce the need for separate processor and support devices. Designers should verify the exact pin assignments, exposed support circuitry, clock requirements, decoupling requirements, and programming configuration in the Microchip ATSAM4S4BA documentation before layout. The 64-pin LQFP is easy to inspect and solder, but careful power and ground layout remains necessary for stable operation. Production designs should also confirm peripheral assignments, package dimensions, and timing requirements against the current manufacturer documentation. This page consolidates the verified manufacturer and distributor information for the ATSAM4S4BA-AN, distinguishes compatible same-package options, summarizes practical selection considerations, and explicitly identifies details that remain unavailable rather than presenting inferred specifications as confirmed facts.

RFQ تماس

ATSAM4S4BA-AU

ATSAM4S4BA-AU - 120MHz Cortex-M4 256KB MCU | Microchip

The Microchip Technology ATSAM4S4BA-AU is a 32-bit ARM Cortex-M4 microcontroller rated up to 120 MHz, with 256 KB of embedded Flash, 64 KB of SRAM, and a 64-pin LQFP package measuring 10 x 10 mm. The supplied distributor record identifies the device as a SAM4S microcontroller with 1.2 V and 3.3 V supply references, making it suitable for embedded control systems requiring a high-performance 32-bit core and substantial local memory. A microcontroller is a programmable system-on-chip that integrates a processor core, nonvolatile program memory, volatile working memory, and peripherals such as serial interfaces, timers, and analog or digital I/O. The ATSAM4S4BA belongs to Microchip's SAM4S family, placing it in the embedded-processing hierarchy of ARM Cortex-M4 MCU, 32-bit microcontroller, embedded controller, and semiconductor. The verified feature set includes an ARM Cortex-M4 processor operating up to 120 MHz, a Memory Protection Unit, DSP instructions, and the Thumb-2 instruction set. Its 256 KB Flash provides program storage, while 64 KB of SRAM supports data and execution. The Flash is described as embedded and ECC-enabled, with security and lock bits. These characteristics support firmware-heavy control, signal processing, communications, and general industrial applications. SAM4S devices also feature a dual-bank Flash architecture according to the Microchip product result. Dual-bank support can improve field-update flexibility by permitting organized flash-management strategies, but project engineers must follow the manufacturer's programming and bootloader procedures rather than assume unrestricted simultaneous execution. Typical uses include industrial automation controllers, connected embedded equipment, motor and motion-control systems, industrial communications, and compact data-acquisition platforms. The 120 MHz Cortex-M4 core and DSP capability are particularly useful when control-loop timing and fixed-point signal processing must coexist with communications firmware. Design planning should begin with the exact 64-pin LQFP footprint, supported power architecture, clock configuration, and peripheral pin multiplexing. Because the provided web results do not expose a complete pin table or individual I/O specifications, those details must be confirmed in the manufacturer datasheet before PCB routing or firmware resource assignment. This page consolidates verified distributor specifications, package information, sourcing links, and design-oriented guidance. It also separates confirmed data from unavailable parameters, allowing engineers to assess the ATSAM4S4BA-AU quickly while preserving traceability to the manufacturer and distributor records retrieved on 2026-10-23.

RFQ تماس

ATSAM4S4BA-AUR

ATSAM4S4BA-AUR - 120MHz Cortex-M4 256KB MCU | Microchip (Tape & Reel)

The Microchip Technology ATSAM4S4BA-AUR is a 32-bit ARM Cortex-M4 microcontroller rated up to 120 MHz, with 256 KB of embedded Flash, 64 KB of SRAM, and a 64-pin LQFP package measuring 10 x 10 mm. The supplied distributor record identifies the device as a SAM4S microcontroller with 1.2 V and 3.3 V supply references, making it suitable for embedded control systems requiring a high-performance 32-bit core and substantial local memory. A microcontroller is a programmable system-on-chip that integrates a processor core, nonvolatile program memory, volatile working memory, and peripherals such as serial interfaces, timers, and analog or digital I/O. The ATSAM4S4BA belongs to Microchip's SAM4S family, placing it in the embedded-processing hierarchy of ARM Cortex-M4 MCU, 32-bit microcontroller, embedded controller, and semiconductor. The verified feature set includes an ARM Cortex-M4 processor operating up to 120 MHz, a Memory Protection Unit, DSP instructions, and the Thumb-2 instruction set. Its 256 KB Flash provides program storage, while 64 KB of SRAM supports data and execution. The Flash is described as embedded and ECC-enabled, with security and lock bits. These characteristics support firmware-heavy control, signal processing, communications, and general industrial applications. SAM4S devices also feature a dual-bank Flash architecture according to the Microchip product result. Dual-bank support can improve field-update flexibility by permitting organized flash-management strategies, but project engineers must follow the manufacturer's programming and bootloader procedures rather than assume unrestricted simultaneous execution. Typical uses include industrial automation controllers, connected embedded equipment, motor and motion-control systems, industrial communications, and compact data-acquisition platforms. The 120 MHz Cortex-M4 core and DSP capability are particularly useful when control-loop timing and fixed-point signal processing must coexist with communications firmware. Design planning should begin with the exact 64-pin LQFP footprint, supported power architecture, clock configuration, and peripheral pin multiplexing. Because the provided web results do not expose a complete pin table or individual I/O specifications, those details must be confirmed in the manufacturer datasheet before PCB routing or firmware resource assignment. This page consolidates verified distributor specifications, package information, sourcing links, and design-oriented guidance. It also separates confirmed data from unavailable parameters, allowing engineers to assess the ATSAM4S4BA-AUR quickly while preserving traceability to the manufacturer and distributor records retrieved on 2026-10-23.

RFQ تماس

ATSAM4S4BA-MU

ATSAM4S4BA-MU - 120MHz Cortex-M4 256KB MCU | Microchip

Microchip Technology ATSAM4S4BA-MU is a 32-bit ARM Cortex-M4 SAM4S microcontroller operating up to 120 MHz, with 256 KB of embedded Flash and 64 KB of SRAM in a 64-QFN 9 x 9 mm package. It combines a Memory Protection Unit, DSP instructions, and the Thumb-2 instruction set in an embedded RISC architecture designed for compact control systems. A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, working memory, and peripherals on one package. The ATSAM4S4BA-MU belongs to the SAM4S family, which sits within the hierarchy of embedded microcontroller, RISC processor, and semiconductor product categories. Its integrated Flash retains firmware without a separate memory chip, while its SRAM supports stack operations, data buffers, and real-time application state. The device's 120 MHz Cortex-M4 core provides the primary headline performance figure, while its 256 KB embedded Flash stores firmware and the 64 KB SRAM provides volatile working memory. Its 1.2 V and 3.3 V operating references match the Microchip family documentation, and the 64-QFN package supports compact surface-mount construction. The integrated MPU and DSP instructions are useful for controlled memory access and digital signal-processing tasks. The SAM4S architecture supports both control-oriented and connected embedded designs. According to the family datasheet, the portfolio includes USB device connectivity and broad peripheral integration, while the verified product listing describes the ATSAM4S4BA-MU specifically as a SAM4S Cortex-M4 device. Firmware should remain within the available memory limits and use the documented peripheral and interrupt architecture rather than assuming that all family variants expose identical resources. Typical uses include industrial control modules, connected embedded products, human-interface equipment, and compact USB-enabled controllers. The processor speed and DSP instruction support suit responsive control loops, protocol handling, and digital filtering, while the integrated Flash simplifies firmware deployment. Board-level USB implementations require careful routing and the associated connector, protection, and signal-integrity design. The primary design consideration is package and memory planning. Designers should use the manufacturer's 64-QFN land pattern, expose-pad requirements, and recommended decoupling rather than relying on a generic QFN footprint. Firmware must also be checked against the exact ATSAM4S4BA-MU peripheral configuration, clock setup, memory map, and operating limits in the manufacturer datasheet. This page combines verified distributor specifications, current purchasing information, migration-aware drop-in candidates, comparison parameters, and practical design guidance. It distinguishes confirmed data from fields that require review against the full Microchip datasheet, helping engineers evaluate this MCU without treating same-family naming as proof of automatic software compatibility.

RFQ تماس

ATSAM4S4BA-UU

ATSAM4S4BA-UU - 120MHz Cortex-M4 MCU 256KB Flash WLCSP-64 (Tape & Reel)

The Microchip Technology ATSAM4S4BA-UU is a 32-bit ARM Cortex-M4 flash microcontroller running at up to 120 MHz, with 256 Kbytes of embedded Flash (with ECC, Security Bit and Lock Bits) and 64 Kbytes of SRAM, housed in a 64-ball WLCSP (Wafer-Level Chip-Scale Package) supplied on Tape & Reel. A microcontroller (MCU) is a single-chip integrated circuit combining a processor core, memory, and peripherals to form a complete embedded control system. Within the MCU hierarchy, the SAM4S family sits in the general-purpose 32-bit flash MCU class, and belongs to the ARM Cortex-M architecture lineage: Cortex-M4 -> ARMv7E-M -> 32-bit RISC microcontroller -> system-on-chip. Key features include the Cortex-M4 core with hardware DSP instructions and Thumb-2 instruction set, a Memory Protection Unit (MPU), dual-bank Flash enabling safe in-application programming, and a supply range of 1.62V to 3.6V (nominal 1.2V/3.3V system operation). The WLCSPGREEN package is RoHS-green, making the device well suited to extreme miniaturization where board area is the dominant constraint. Technically, the ATSAM4S4BA-UU integrates a 12-bit ADC, UART, SPI and TWI serial interfaces typical of the SAM4S family, and benefits from Microchip's peripheral set including DMA channels for low CPU-load data movement. Pin-to-pin compatibility across the SAM4S series (and with SAM4N, SAM3S, SAM3N, SAM7S in 64-pin versions) allows flash-size migration without PCB redesign. Typical applications include compact portable and battery-powered devices, IoT sensor nodes, industrial control modules, and consumer electronics where a small 64-ball wafer-level footprint at up to 120 MHz is required. A key design consideration: the WLCSP package exposes balls on a ~0.4-0.5 mm pitch; rework requires experienced assembly and the PCB must follow Microchip's ball-mapping layout guidelines. Confirm exact ball pitch and outline in the manufacturer datasheet before layout. This page synthesizes verified distributor data, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ تماس

ATSAM4S4BA-UUR

ATSAM4S4BA-UUR - 120MHz Cortex-M4 MCU 256KB Flash WLCSP-64

The Microchip Technology ATSAM4S4BA-UUR is a 32-bit ARM Cortex-M4 flash microcontroller running at up to 120 MHz, with 256 Kbytes of embedded Flash (with ECC, Security Bit and Lock Bits) and 64 Kbytes of SRAM, housed in a 64-ball WLCSP (Wafer-Level Chip-Scale Package) supplied on Tape & Reel. A microcontroller (MCU) is a single-chip integrated circuit combining a processor core, memory, and peripherals to form a complete embedded control system. Within the MCU hierarchy, the SAM4S family sits in the general-purpose 32-bit flash MCU class, and belongs to the ARM Cortex-M architecture lineage: Cortex-M4 -> ARMv7E-M -> 32-bit RISC microcontroller -> system-on-chip. Key features include the Cortex-M4 core with hardware DSP instructions and Thumb-2 instruction set, a Memory Protection Unit (MPU), dual-bank Flash enabling safe in-application programming, and a supply range of 1.62V to 3.6V (nominal 1.2V/3.3V system operation). The WLCSPGREEN package is RoHS-green, making the device well suited to extreme miniaturization where board area is the dominant constraint. Technically, the ATSAM4S4BA-UUR integrates a 12-bit ADC, UART, SPI and TWI serial interfaces typical of the SAM4S family, and benefits from Microchip's peripheral set including DMA channels for low CPU-load data movement. Pin-to-pin compatibility across the SAM4S series (and with SAM4N, SAM3S, SAM3N, SAM7S in 64-pin versions) allows flash-size migration without PCB redesign. Typical applications include compact portable and battery-powered devices, IoT sensor nodes, industrial control modules, and consumer electronics where a small 64-ball wafer-level footprint at up to 120 MHz is required. A key design consideration: the WLCSP package exposes balls on a ~0.4-0.5 mm pitch; rework requires experienced assembly and the PCB must follow Microchip's ball-mapping layout guidelines. Confirm exact ball pitch and outline in the manufacturer datasheet before layout. This page synthesizes verified distributor data, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ تماس

ATSAM4S4BB-AN

ATSAM4S4BB-AN - 120MHz Cortex-M4 MCU 256KB Flash | Microchip (Tape & Reel)

The Microchip Technology ATSAM4S4BB-AN is a 32-bit ARM Cortex-M4 microcontroller running at up to 120 MHz, with 256 KB of embedded Flash and 64 KB of SRAM, housed in a 64-pin LQFP (10 x 10 mm) surface-mount package. A microcontroller unit (MCU) is a single-chip computer that integrates a processor core, program memory, data memory, and a rich set of peripherals onto one die. Within the semiconductor hierarchy, the ATSAM4S4BB-AN belongs to the ARM Cortex-M4 32-bit MCU class, the broader SAM4S Flash MCU family from Microchip (formerly Atmel), and the general category of embedded processors used in industrial and consumer electronic systems. Key features include the Cortex-M4 core with DSP instructions and Thumb-2 instruction set, a Memory Protection Unit (MPU), dual-bank Flash with ECC, Security Bit and Lock Bits for code protection, and a wide 1.62 V to 3.6 V single-supply operating range. The DSP extension set accelerates filter and control math, while the MPU supports functional-safety and RTOS memory partitioning. Architecturally, the device uses an ARMv7E-M Harvard pipeline with a dedicated AHB bus matrix, allowing parallel flash-execution and peripheral DMA traffic. Power consumption is optimized for the SAM4S family, supporting low-power sleep, wait, and backup modes suitable for battery-operated nodes. Typical applications include industrial control and factory automation, motor control and power conversion, building automation and IoT sensor nodes, and consumer appliances requiring deterministic 32-bit control with DSP capability. A key design consideration: the ANR suffix denotes Tape-and-Reel packaging and industrial temperature operation; the SAM4S series is pin-to-pin compatible with SAM4N, SAM3S, SAM3N and SAM7S devices in the 64-pin version, which simplifies in-family migration but does not extend to other vendors' MCUs. This page synthesizes distributor pricing, drop-in SAM4S family alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ تماس

ATSAM4S4BB-ANR

ATSAM4S4BB-ANR - 120MHz Cortex-M4 MCU 256KB Flash | Microchip

The Microchip Technology ATSAM4S4BB-ANR is a 32-bit ARM Cortex-M4 microcontroller running at up to 120 MHz, with 256 KB of embedded Flash and 64 KB of SRAM, housed in a 64-pin LQFP (10 x 10 mm) surface-mount package. A microcontroller unit (MCU) is a single-chip computer that integrates a processor core, program memory, data memory, and a rich set of peripherals onto one die. Within the semiconductor hierarchy, the ATSAM4S4BB-ANR belongs to the ARM Cortex-M4 32-bit MCU class, the broader SAM4S Flash MCU family from Microchip (formerly Atmel), and the general category of embedded processors used in industrial and consumer electronic systems. Key features include the Cortex-M4 core with DSP instructions and Thumb-2 instruction set, a Memory Protection Unit (MPU), dual-bank Flash with ECC, Security Bit and Lock Bits for code protection, and a wide 1.62 V to 3.6 V single-supply operating range. The DSP extension set accelerates filter and control math, while the MPU supports functional-safety and RTOS memory partitioning. Architecturally, the device uses an ARMv7E-M Harvard pipeline with a dedicated AHB bus matrix, allowing parallel flash-execution and peripheral DMA traffic. Power consumption is optimized for the SAM4S family, supporting low-power sleep, wait, and backup modes suitable for battery-operated nodes. Typical applications include industrial control and factory automation, motor control and power conversion, building automation and IoT sensor nodes, and consumer appliances requiring deterministic 32-bit control with DSP capability. A key design consideration: the ANR suffix denotes Tape-and-Reel packaging and industrial temperature operation; the SAM4S series is pin-to-pin compatible with SAM4N, SAM3S, SAM3N and SAM7S devices in the 64-pin version, which simplifies in-family migration but does not extend to other vendors' MCUs. This page synthesizes distributor pricing, drop-in SAM4S family alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ تماس

ATSAM4S4BB-MN

ATSAM4S4BB-MN - 120MHz Cortex-M4 MCU 256KB Flash | Microchip

The Microchip Technology ATSAM4S4BB-MN is a 32-bit ARM Cortex-M4 microcontroller running at up to 120 MHz with 256 KB of embedded Flash and 64 KB of SRAM, housed in a 64-pin VQFN (9x9 mm) package with exposed pad. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals such as ADCs, timers, and communication interfaces on one die. Within the embedded systems hierarchy, the SAM4S family belongs to the 32-bit ARM Cortex-M class of MCUs, positioned above 8-bit PIC devices and below application processors, and is used wherever deterministic real-time control and moderate DSP capability are required. Key differentiating features include the Cortex-M4 core with DSP instructions and Thumb-2 instruction set, a Memory Protection Unit (MPU) for robust software partitioning, dual-bank Flash enabling safe in-application programming and firmware updates, ECC (error-correcting code) on Flash, plus Security Bit and Lock Bits for IP protection. The wide 1.62 V to 3.6 V supply range simplifies battery and industrial power design. Architecturally, the SAM4S4B builds on the high-performance Cortex-M4 pipeline, which pairs the 32-bit core with single-cycle MAC and SIMD DSP instructions, accelerating filtering and control-loop mathematics beyond what a Cortex-M3 delivers. According to the Microchip SAM4S family datasheet (document 60001419B), the series also offers pin-to-pin compatibility with SAM4N, SAM3S, SAM3N and SAM7S devices, enabling easy migration within the portfolio and across the XAIPART catalog. Typical applications include industrial control and automation nodes, consumer and medical devices, and embedded systems requiring USB connectivity and 12-bit ADC plus 12-bit DAC conversion. The 64-QFN footprint suits compact, thermally demanding PCB layouts. When designing with this part, budget the Flash across the dual banks to allow background firmware updates without external memory, and use the MPU to isolate safety-critical tasks. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ تماس

ATSAM4S4BB-MNR

ATSAM4S4BB-MNR - 120MHz Cortex-M4 MCU 256KB Flash | Microchip

The Microchip Technology ATSAM4S4BB-MNR is a 32-bit ARM Cortex-M4 flash microcontroller operating at up to 120 MHz, with 256 KB of embedded Flash and 64 KB of SRAM, housed in a 64-pin QFN (9x9 mm) surface-mount package. A microcontroller (MCU) is a single-chip embedded processor that integrates a CPU core, program memory, data memory, and peripherals on one die, forming the lowest tier of the embedded-computing hierarchy (MCU -> embedded processor -> system-on-chip). The SAM4S family is part of Microchip's ARM-based SAM portfolio, positioned for general-purpose mid-range embedded control applications. Key features of the ATSAM4S4B include the ARM Cortex-M4 core with Memory Protection Unit (MPU), DSP instructions, and the Thumb-2 instruction set; 256 Kbytes of embedded Flash with ECC, Security Bit and Lock Bits; 64 Kbytes of SRAM; and dual-bank Flash enabling safe in-application firmware updates. Supply voltage spans 1.62V to 3.6V, supporting both coin-cell and USB-powered designs. Architecturally, the Cortex-M4 pipeline with DSP extensions accelerates filter and control-loop math, while the dual-bank Flash plus ECC improves field-update robustness and data integrity in noise-prone industrial environments. According to the Microchip SAM4S family datasheet (document 60001419B), the SAM4S series offers pin-to-pin compatibility with SAM4N, SAM3S, SAM3N and SAM7S devices, simplifying migration within the portfolio. Typical applications include industrial control and automation nodes, consumer and portable devices, and USB-connected sensor bridges where the full-speed USB Device port and 120 MHz compute headroom reduce bill-of-material complexity. Design consideration: keep VDDIN within the 1.62V to 3.6V range and decouple VDDCORE/VDDOUT per the SAM4S datasheet power-tree; the 9x9 mm QFN requires an exposed-pad ground connection for thermal and signal-integrity performance. This page synthesizes distributor pricing, family drop-in alternatives, and practical design guidance not consolidated on the manufacturer datasheet alone.

RFQ تماس

ATSAM4S4CA-AN

ATSAM4S4CA-AN - 120MHz Cortex-M4 MCU | Microchip

The Microchip Technology ATSAM4S4CA-AN is a 32-bit Arm Cortex-M4 microcontroller operating at 120 MHz, with 256 KB of Flash program memory, 64 KB of SRAM, and a 100-pin LQFP package. It combines a high-performance 32-bit processor with extensive embedded peripherals, including a 16-channel 12-bit ADC and dual 12-bit DACs, making it suitable for industrial control, data acquisition, communications, and embedded automation systems. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals into one compact device. The ATSAM4S4CA-AN belongs to the SAM4S family of 32-bit embedded processors and sits within the hierarchy of Arm Cortex-M4 microcontrollers, embedded controllers, and integrated circuits. It allows firmware, communications protocols, analog measurement, and control functions to be implemented on a single device rather than across several discrete components. The 120 MHz Cortex-M4 core provides processing performance for interrupt-driven control, protocol handling, and real-time data processing. Its 256 KB Flash memory supports application firmware and boot code, while 64 KB of SRAM provides working memory for stack operations, buffers, and control algorithms. The integrated 12-bit ADC supports up to 16 input channels, and the dual 12-bit DAC provides two independent digital-to-analog output paths. These resources reduce external component count in compact embedded systems. The ATSAM4S4CA-AN is identified in the 100-LQFP industrial package, with surface-mount gull-wing leads for automated assembly and inspection. Its industrial temperature-grade marking supports use in factory equipment, environmental controllers, industrial communications equipment, and embedded measurement systems. Boundary, power, and exposed-pad requirements should be followed from the manufacturer datasheet and pin-description table when laying out the PCB. Typical applications include PLC and automation controllers, sensor-acquisition nodes, industrial data loggers, motor and process-control equipment, communications gateways, and embedded instrumentation. The combination of 120 MHz processing, 12-bit analog conversion, dual DAC outputs, and 64 KB SRAM allows these systems to consolidate measurement and control functions while preserving deterministic embedded behavior. When designing around this device, begin with the manufacturer pin-description and electrical-characteristics tables, especially for power sequencing, analog-reference requirements, and peripheral pin multiplexing. Place decoupling capacitors close to the supply pins, route sensitive analog inputs away from switching nodes, and validate the clock, reset, and programming interfaces on the first prototype. The 100-LQFP footprint also requires deliberate fanout for the fine-pitch leads and thermal-aware copper distribution. This product analysis combines processor, memory, analog-peripheral, package, sourcing, and engineering-selection information in a format that supports direct PCB planning, firmware architecture decisions, and drop-in replacement evaluation.

RFQ تماس

ATSAM4S4CA-AU

ATSAM4S4CA-AU - 120MHz Cortex-M4 256KB Flash MCU | Microchip

The Microchip Technology ATSAM4S4CA-AU is a 32-bit ARM Cortex-M4 microcontroller running at up to 120 MHz with 256 KB of embedded Flash and 64 KB of SRAM, housed in a 100-pin LQFP (14 x 14 mm) surface-mount package. A microcontroller (MCU) integrates a processor core, memory, and peripherals on a single die, forming the lowest level of the embedded computing hierarchy: semiconductor -> integrated circuit -> embedded processor -> microcontroller. The SAM4S family belongs to Microchip's ARM-based SAM portfolio, which targets general-purpose embedded control where a balance of performance, integration, and power efficiency is required. Key features include the Cortex-M4 core with hardware floating-point unit, operating from a 1.62 V to 3.6 V single supply, and power consumption of approximately 180 uA/MHz per the Microchip ATSAM4S4C product page. The 256 KB Flash supports in-application programming, and the 64 KB SRAM provides headroom for real-time control loops, communication buffers, and small RTOS kernels. Architecturally, the device combines the Cortex-M4 pipeline with a multi-layer bus matrix, DMA channels, and a rich peripheral set typical of the SAM4S family, including USART, SPI, TWI (I2C), and PWM resources. Flash accelerator logic keeps the core fed at the full 120 MHz clock rate, minimizing wait-state penalties in deterministic control applications. Typical applications include industrial control and automation nodes, consumer appliance interfaces, embedded networking and gateways, test and measurement instruments, and portable battery-powered devices where the 180 uA/MHz consumption extends battery life. When designing with this device, plan power budgeting around the 1.62 V to 3.6 V supply window and use appropriate decoupling on the VDDIO and VDDCORE domains; also verify that the industrial temperature grade (typically -40C to +85C) matches your end environment. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes beyond the raw datasheet, giving engineers a single citable source for the ATSAM4S4CA-AU.

RFQ تماس

ATSAM4S4CA-AUR

ATSAM4S4CA-AUR - 120MHz Cortex-M4 256KB Flash MCU | Microchip (Tape & Reel)

The Microchip Technology ATSAM4S4CA-AUR is a 32-bit ARM Cortex-M4 microcontroller running at up to 120 MHz with 256 KB of embedded Flash and 64 KB of SRAM, housed in a 100-pin LQFP (14 x 14 mm) surface-mount package. A microcontroller (MCU) integrates a processor core, memory, and peripherals on a single die, forming the lowest level of the embedded computing hierarchy: semiconductor -> integrated circuit -> embedded processor -> microcontroller. The SAM4S family belongs to Microchip's ARM-based SAM portfolio, which targets general-purpose embedded control where a balance of performance, integration, and power efficiency is required. Key features include the Cortex-M4 core with hardware floating-point unit, operating from a 1.62 V to 3.6 V single supply, and power consumption of approximately 180 uA/MHz per the Microchip ATSAM4S4C product page. The 256 KB Flash supports in-application programming, and the 64 KB SRAM provides headroom for real-time control loops, communication buffers, and small RTOS kernels. Architecturally, the device combines the Cortex-M4 pipeline with a multi-layer bus matrix, DMA channels, and a rich peripheral set typical of the SAM4S family, including USART, SPI, TWI (I2C), and PWM resources. Flash accelerator logic keeps the core fed at the full 120 MHz clock rate, minimizing wait-state penalties in deterministic control applications. Typical applications include industrial control and automation nodes, consumer appliance interfaces, embedded networking and gateways, test and measurement instruments, and portable battery-powered devices where the 180 uA/MHz consumption extends battery life. When designing with this device, plan power budgeting around the 1.62 V to 3.6 V supply window and use appropriate decoupling on the VDDIO and VDDCORE domains; also verify that the industrial temperature grade (typically -40C to +85C) matches your end environment. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes beyond the raw datasheet, giving engineers a single citable source for the ATSAM4S4CA-AUR.

RFQ تماس

ATSAM4S4CA-CFU

ATSAM4S4CA-CFU - 120MHz Cortex-M4 MCU, 256KB Flash | Microchip

The Microchip Technology ATSAM4S4CA-CFU is a 32-bit ARM Cortex-M4 microcontroller from the SAM4S series running at 120 MHz with 256KB of on-chip flash memory, housed in a 100-ball VFBGA (7x7 mm) package for industrial temperature ranges. An ARM Cortex-M4 MCU is a 32-bit reduced-instruction-set (RISC) processor core that integrates a CPU, memory, and peripherals on a single chip, serving as the central controller in embedded systems. Within the product hierarchy, the SAM4S sits between entry-level Cortex-M0+ devices and high-performance Cortex-M7 MCUs, and the ATSAM4S4CA-CFU occupies the mid-memory-density tier of the SAM4S family, complemented by larger siblings in the power-management and embedded-control landscape. Key features include a 120 MHz Cortex-M4 core with single-cycle MAC and hardware FPU support in the family, 256KB flash with page-erase programming, and pin-to-pin compatibility across the SAM4S, SAM4N, SAM3S, SAM3N and SAM7S portfolios, which simplifies migration and footprint reuse. The 100-VFBGA (7x7 mm) ball-grid-array keeps board area minimal for space-constrained industrial designs. From a technical perspective, the SAM4S series combines scalable performance with memory density and power efficiency. The Cortex-M4 core delivers deterministic real-time response with nested vectored interrupts, and the memory bus architecture sustains full-speed flash execution at 120 MHz with flash accelerator techniques typical of the Atmel/Microchip SMART family. Typical applications include industrial automation controllers, sensor hubs and data loggers, embedded networking nodes, and consumer portable devices where a compact 100-ball BGA and 256KB flash provide the right balance of cost and capability. Design consideration: 100-VFBGA packages require microvia or HDI PCB technology; verify your fab capability for 0.8 mm or finer ball pitch before layout, and plan power decoupling on every supply ball pair. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, making it a one-stop reference for the ATSAM4S4CA-CFU.

RFQ تماس

ATSAM4S4CA-CU

ATSAM4S4CA-CU - 120MHz Cortex-M4 MCU 256KB Flash | Microchip

The Microchip Technology ATSAM4S4CA-CU is a 32-bit ARM Cortex-M4 microcontroller running at up to 120 MHz with single-cycle access to 256 KB of Flash memory, 64 KB of SRAM, and a 100-ball TFBGA package (9x9 mm) specified for the industrial temperature range (-40C to +85C). A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, program memory, data memory, and peripherals into one chip, forming the lowest tier of the embedded processing hierarchy (MCU -> embedded processor -> system-on-chip). The SAM4S family sits within the Microchip (formerly Atmel) SMART ARM-based MCU portfolio and belongs to the broader class of 32-bit RISC flash microcontrollers used in embedded control systems. The ATSAM4S4CA-CU is one of the smaller Flash/RAM members of the family, positioned for cost-sensitive industrial designs that still need the full SAM4S peripheral set. Key differentiating features include the Cortex-M4 core with DSP instructions and a single-precision hardware FPU for math-intensive control loops, a full-speed USB Device port with embedded transceiver, an external bus interface supporting SRAM, PSRAM, NOR Flash, NAND Flash, and LCD modules, and native support for Microchip QTouch capacitive touch technology for buttons, sliders, and wheels. The SAM4S peripheral set also includes multiple USART/SPI/TWI (I2C) interfaces, PWM timers, a 12-bit ADC, and a parallel capture mode for data acquisition. The SAM4S architecture implements up to 2048 KB of Flash with optional dual-bank implementation across the family, up to 160 KB of SRAM on larger variants, and Microchip-documented pin-to-pin compatibility with SAM7S, SAM3N, SAM4N and SAM3S devices. The 120 MHz core with FPU achieves roughly 1.25 DMIPS/MHz class performance for deterministic real-time control, and the on-chip cache above 128 KB Flash variants accelerates execution from Flash. Typical applications include industrial automation controllers, consumer and industrial touch interfaces, motor control, USB-connected instruments, and embedded systems requiring external memory or LCD expansion via the EBI. The 100-ball TFBGA keeps the board footprint small while exposing the full EBI and peripheral count of the device. Design consideration: the ATSAM4S4CA-CU is supplied in tray packaging for industrial-grade operation, and the TFBGA ball footprint requires careful PCB land-pattern design and X-ray-capable inspection. Designers migrating from SAM7S, SAM3N, SAM3S, or SAM4N devices benefit from documented pin-to-pin compatibility within the Microchip portfolio. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with all pricing referenced as of 2026-10-07.

RFQ تماس

ATSAM4S4CA-CUR

ATSAM4S4CA-CUR - 120MHz Cortex-M4 MCU 256KB Flash | Microchip (Tape & Reel)

The Microchip Technology ATSAM4S4CA-CUR is a 32-bit ARM Cortex-M4 microcontroller running at up to 120 MHz with single-cycle access to 256 KB of Flash memory, 64 KB of SRAM, and a 100-ball TFBGA package (9x9 mm) specified for the industrial temperature range (-40C to +85C). A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, program memory, data memory, and peripherals into one chip, forming the lowest tier of the embedded processing hierarchy (MCU -> embedded processor -> system-on-chip). The SAM4S family sits within the Microchip (formerly Atmel) SMART ARM-based MCU portfolio and belongs to the broader class of 32-bit RISC flash microcontrollers used in embedded control systems. The ATSAM4S4CA-CUR is one of the smaller Flash/RAM members of the family, positioned for cost-sensitive industrial designs that still need the full SAM4S peripheral set. Key differentiating features include the Cortex-M4 core with DSP instructions and a single-precision hardware FPU for math-intensive control loops, a full-speed USB Device port with embedded transceiver, an external bus interface supporting SRAM, PSRAM, NOR Flash, NAND Flash, and LCD modules, and native support for Microchip QTouch capacitive touch technology for buttons, sliders, and wheels. The SAM4S peripheral set also includes multiple USART/SPI/TWI (I2C) interfaces, PWM timers, a 12-bit ADC, and a parallel capture mode for data acquisition. The SAM4S architecture implements up to 2048 KB of Flash with optional dual-bank implementation across the family, up to 160 KB of SRAM on larger variants, and Microchip-documented pin-to-pin compatibility with SAM7S, SAM3N, SAM4N and SAM3S devices. The 120 MHz core with FPU achieves roughly 1.25 DMIPS/MHz class performance for deterministic real-time control, and the on-chip cache above 128 KB Flash variants accelerates execution from Flash. Typical applications include industrial automation controllers, consumer and industrial touch interfaces, motor control, USB-connected instruments, and embedded systems requiring external memory or LCD expansion via the EBI. The 100-ball TFBGA keeps the board footprint small while exposing the full EBI and peripheral count of the device. Design consideration: the ATSAM4S4CA-CUR is supplied in tray packaging for industrial-grade operation, and the TFBGA ball footprint requires careful PCB land-pattern design and X-ray-capable inspection. Designers migrating from SAM7S, SAM3N, SAM3S, or SAM4N devices benefit from documented pin-to-pin compatibility within the Microchip portfolio. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with all pricing referenced as of 2026-10-07.

RFQ تماس

ATSAM4S4CB-AN

ATSAM4S4CB-AN - 120MHz Cortex-M4, 256KB Flash MCU | Microchip

The Microchip Technology ATSAM4S4CB-AN is a 32-bit ARM Cortex-M4 microcontroller running at 120 MHz with 256 KB flash and 64 KB SRAM, housed in a 100-pin LQFP (14x14 mm) surface-mount package with industrial temperature rating from -40C to +105C. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals into one chip, forming the lowest level of the embedded-computing hierarchy: microcontroller -> embedded processor -> system-on-chip -> computing system. The SAM4S family is Microchip (formerly Atmel) ARM Cortex-M4-based flash MCU line, positioned for cost-sensitive designs that still need DSP-class math capability from the core's single-cycle MAC and hardware FPU-free thumb-2 instruction set. Key features include the 120 MHz maximum clock frequency, 256 KB (256K x 8) of on-chip flash program memory, 64 kB of data SRAM, 79 general-purpose I/O lines, and a 12-bit ADC. The wide 1.2V/3.3V operating supply support and LQFP GREEN, MRL B packaging simplify both design and assembly. Technically, the SAM4S implements an ARM Cortex-M4 RISC core with a 3-stage pipeline and Harvard architecture, plus a multi-layer bus matrix that lets flash execution and peripheral DMA operate concurrently. The 12-bit ADC, multiple USART/SPI/TWI serial channels, PWM timers, and USB device connectivity cover most industrial interface needs without external components. Typical applications include industrial automation and factory control nodes, consumer appliance controllers, and measurement or data-logging instruments where 256 KB flash and 79 I/O lines give adequate headroom for RTOS-based firmware. Design consideration: supply the core from the integrated regulator (1.2V) and I/O from 3.3V, and decouple both rails close to the package to guarantee 120 MHz operation across the full industrial temperature range. This page synthesizes distributor pricing, drop-in alternatives, pinout resources, and practical design notes not found in the manufacturer datasheet. Pricing is as of 2026-09-20.

RFQ تماس

ATSAM4S4CB-ANR

ATSAM4S4CB-ANR - 120MHz Cortex-M4, 256KB Flash MCU | Microchip (Tape & Reel)

The Microchip Technology ATSAM4S4CB-ANR is a 32-bit ARM Cortex-M4 microcontroller running at 120 MHz with 256 KB flash and 64 KB SRAM, housed in a 100-pin LQFP (14x14 mm) surface-mount package with industrial temperature rating from -40C to +105C. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals into one chip, forming the lowest level of the embedded-computing hierarchy: microcontroller -> embedded processor -> system-on-chip -> computing system. The SAM4S family is Microchip (formerly Atmel) ARM Cortex-M4-based flash MCU line, positioned for cost-sensitive designs that still need DSP-class math capability from the core's single-cycle MAC and hardware FPU-free thumb-2 instruction set. Key features include the 120 MHz maximum clock frequency, 256 KB (256K x 8) of on-chip flash program memory, 64 kB of data SRAM, 79 general-purpose I/O lines, and a 12-bit ADC. The wide 1.2V/3.3V operating supply support and LQFP GREEN, MRL B packaging simplify both design and assembly. Technically, the SAM4S implements an ARM Cortex-M4 RISC core with a 3-stage pipeline and Harvard architecture, plus a multi-layer bus matrix that lets flash execution and peripheral DMA operate concurrently. The 12-bit ADC, multiple USART/SPI/TWI serial channels, PWM timers, and USB device connectivity cover most industrial interface needs without external components. Typical applications include industrial automation and factory control nodes, consumer appliance controllers, and measurement or data-logging instruments where 256 KB flash and 79 I/O lines give adequate headroom for RTOS-based firmware. Design consideration: supply the core from the integrated regulator (1.2V) and I/O from 3.3V, and decouple both rails close to the package to guarantee 120 MHz operation across the full industrial temperature range. This page synthesizes distributor pricing, drop-in alternatives, pinout resources, and practical design notes not found in the manufacturer datasheet. Pricing is as of 2026-09-20.

RFQ تماس

ATSAM4S4CB-CFN

ATSAM4S4CB-CFN - 120MHz Cortex-M4 MCU 256KB Flash | Microchip

The Microchip Technology ATSAM4S4CB-CFN is a 32-bit ARM Cortex-M4 microcontroller running at up to 120 MHz, with 256 KB (256K x 8) single-cycle Flash memory and a 100-ball VFBGA (7x7 mm) package. A microcontroller unit (MCU) is a complete embedded computer on a single chip, combining a processor core, memory, and peripherals. The ARM Cortex-M4 is a 32-bit RISC processor core widely used in embedded systems, positioned above entry-level Cortex-M0 parts and below high-performance application processors. Within the power/performance hierarchy, MCUs like this sit at the heart of the embedded processing chain: semiconductor -> 32-bit MCU -> ARM Cortex-M4 -> SAM4S series. Key differentiating features include the 120 MHz maximum core frequency, the Cortex-M4 DSP instructions and optional floating-point acceleration for math-heavy workloads, and a compact 7x7 mm ball-grid-array footprint suited to space-constrained boards. Per the SAM4S family datasheet, the series integrates a full-speed USB Device port with embedded transceiver, up to 160 KB of SRAM across family variants, dual-bank Flash options, and a rich peripheral set including UART/USART, SPI, TWI (I2C), ADC, PWM, and a real-time clock. Technically, the ATSAM4S4CB-CFN implements a Harvard architecture with a memory protection unit, supports 1.2V/3.3V supply domains per distributor specifications, and is rated for the industrial temperature range with a 105C maximum rating noted by Mouser for the GREEN, MRL B ball-matrix variant. The VFBGA100 substrate provides short interconnects that improve signal integrity and reduce board area compared with quad flat-pack equivalents. Typical applications include industrial control panels, consumer devices requiring USB connectivity, data-logging systems, motor control front-ends, and embedded gateways where DSP filtering and compact BGA packaging matter. Design consideration: BGA packages require X-ray inspection for solder-joint verification and a controlled-reflow PCB process; verify the 0.8 mm ball pitch against your fabricator capabilities before committing to the 7x7 mm VFBGA footprint. This page synthesizes verified distributor data, same-footprint drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ تماس

زیردسته‌ها

محصولات (39,000+)

ATSAM4S4AA-MU - 120MHz Cortex-M4, 256KB MCU | Microchip

ATSAM4S4AB-AN - Cortex-M4 120MHz 256KB MCU | Microchip

ATSAM4S4AB-ANR - 120MHz Cortex-M4 256KB MCU | Microchip

ATSAM4S4AB-MN - 120MHz Cortex-M4 MCU 256KB Flash | Microchip

ATSAM4S4AB-MNR - 120MHz Cortex-M4 MCU 256KB Flash | Microchip (Tape & Reel)

ATSAM4S4BA-AN - 120MHz Cortex-M4 256KB MCU | Microchip

ATSAM4S4BA-AU - 120MHz Cortex-M4 256KB MCU | Microchip

ATSAM4S4BA-AUR - 120MHz Cortex-M4 256KB MCU | Microchip (Tape & Reel)

ATSAM4S4BA-MU - 120MHz Cortex-M4 256KB MCU | Microchip

ATSAM4S4BA-UU - 120MHz Cortex-M4 MCU 256KB Flash WLCSP-64 (Tape & Reel)

ATSAM4S4BA-UUR - 120MHz Cortex-M4 MCU 256KB Flash WLCSP-64

ATSAM4S4BB-AN - 120MHz Cortex-M4 MCU 256KB Flash | Microchip (Tape & Reel)

ATSAM4S4BB-ANR - 120MHz Cortex-M4 MCU 256KB Flash | Microchip

ATSAM4S4BB-MN - 120MHz Cortex-M4 MCU 256KB Flash | Microchip

ATSAM4S4BB-MNR - 120MHz Cortex-M4 MCU 256KB Flash | Microchip

ATSAM4S4CA-AN - 120MHz Cortex-M4 MCU | Microchip

ATSAM4S4CA-AU - 120MHz Cortex-M4 256KB Flash MCU | Microchip

ATSAM4S4CA-AUR - 120MHz Cortex-M4 256KB Flash MCU | Microchip (Tape & Reel)

ATSAM4S4CA-CFU - 120MHz Cortex-M4 MCU, 256KB Flash | Microchip

ATSAM4S4CA-CU - 120MHz Cortex-M4 MCU 256KB Flash | Microchip

ATSAM4S4CA-CUR - 120MHz Cortex-M4 MCU 256KB Flash | Microchip (Tape & Reel)

ATSAM4S4CB-AN - 120MHz Cortex-M4, 256KB Flash MCU | Microchip

ATSAM4S4CB-ANR - 120MHz Cortex-M4, 256KB Flash MCU | Microchip (Tape & Reel)

ATSAM4S4CB-CFN - 120MHz Cortex-M4 MCU 256KB Flash | Microchip