مدارهای مجتمع

5CSXFC5D6F31C7N

5CSXFC5D6F31C7N - Cyclone V SX SoC FPGA 85K LE | Intel

The Intel (formerly Altera) 5CSXFC5D6F31C7N is a Cyclone V SX System-on-Chip (SoC) FPGA integrating 85,000 logic elements with a dual-core ARM Cortex-A9 MPCore hard processor subsystem plus CoreSight debug, in a 896-pin FineLine BGA (31x31 mm) package at the commercial 0C to 85C temperature grade. The FPGA fabric contains 32,075 logic blocks, runs up to 800 MHz, and supports up to 3.125 Gbps through 9 integrated transceivers, making it a balanced mid-range SoC FPGA for industrial motor control, machine vision, and embedded video pipelines. An SoC FPGA combines a general-purpose processor subsystem (HPS) with programmable logic on a single die, eliminating the need for a separate processor chip and providing high-bandwidth on-chip interconnects between the ARM cores and the FPGA fabric. Within the broader semiconductor taxonomy, the Cyclone V SX belongs to the SoC FPGA product family, which sits between pure microcontrollers and high-end FPGAs, offering low total power, deterministic real-time performance, and flexible I/O. Cyclone V devices use TSMC's 28 nm low-power process and integrate transceivers, PCIe Gen2 hard IP blocks, and hard memory controllers. Key features of the 5CSXFC5D6F31C7N include 85K logic elements (LEs), 4,480 Kbits of embedded memory, 87 variable-precision DSP blocks, and dual ARM Cortex-A9 cores with NEON media-processing engines. The 800 MHz HPS supports DDR2/DDR3/LPDDR2 interfaces with error correction, while the FPGA fabric supports DDR3 up to 800 MHz. Hard PCIe Gen2 x4 controllers and three PLL types (FPGA PLLs, HPS PLLs, transceiver PLLs) simplify clock tree design. Typical applications include industrial motor control drives with EtherCAT or PROFIBUS, factory automation controllers, video surveillance with on-chip analytics, and portable medical imaging pre-processing. The 896-FBGA package is pin-compatible with other 5CSXFC5D6F31 speed-grade 7 variants, allowing design migration between commercial and industrial grades with the same PCB. Designers should plan decoupling carefully: the HPS and FPGA fabric each require their own rail sequencing, and the integrated transceivers demand 0.1 uF and 0.01 uF high-frequency ceramic capacitors within 1 cm of the power pins. JTAG and Active Serial configuration paths must be wired to the dedicated dual-purpose pins to enable in-system programming. This page synthesizes distributor pricing, drop-in Cyclone V alternatives, and practical SoC FPGA design notes not found in the manufacturer datasheet, helping engineers select the right speed grade and temperature range for their volume production build.

RFQ تماس

5CSXFC5D6F31C8N

5CSXFC5D6F31C8N - Cyclone V SX SoC FPGA, 85K LE, Dual ARM Cortex-A9 | Intel

The Intel 5CSXFC5D6F31C8N is a Cyclone V SX System-on-Chip (SoC) FPGA integrating 85K logic elements with a dual-core ARM Cortex-A9 MPCore hard processor system in a 896-pin FBGA (31x31 mm) package. It supports up to 600 MHz HPS clock and combines a low-power FPGA fabric with variable-precision DSP blocks, integrated transceivers, and embedded memory blocks, making it suitable for industrial, automotive, and video/embedded compute workloads. A Cyclone V SX SoC FPGA belongs to the broader family of FPGAs (Field Programmable Gate Arrays) — programmable semiconductor devices that implement arbitrary digital logic via configurable logic blocks (CLBs), programmable interconnects, and embedded hardware IP. SoC FPGAs extend this concept by co-integrating a hard processor system (HPS) on the same die, enabling software programmability alongside parallel hardware acceleration. Within the FPGA taxonomy, Cyclone V sits in the low-power, mid-density tier between Cyclone IV and Cyclone 10; the SX sub-family specifically targets applications requiring HPS integration alongside the FPGA fabric. Key features of the 5CSXFC5D6F31C8N include 85K logic elements, embedded ARM Cortex-A9 dual-core HPS running up to 600 MHz, variable-precision DSP blocks for signal processing acceleration, integrated memory controllers, and a high-speed transceiver interface. The device supports DDR2/DDR3 external memory interfaces through hard controllers, and provides PCIe Gen2 hard IP for high-bandwidth host connectivity. The 896-ball FBGA package supports substantial GPIO counts through 8 I/O banks operating at multiple voltage standards. The 5CSXFC5D6F31C8N uses TSMC's 28 nm low-power process technology, balancing logic density with low static and dynamic power consumption. The integrated HPS includes ARM CoreSight debug, NEON media engine, and a rich set of peripherals (EMAC, USB, SD/MMC, NAND), allowing the device to run embedded Linux, VxWorks, or bare-metal firmware without an external host processor. Typical applications include industrial machine vision systems, video surveillance and image processing pipelines, motor control and industrial automation, automotive driver assistance, and embedded computing platforms. The combination of FPGA fabric and ARM HPS allows designers to partition tasks: time-critical DSP operations execute in programmable logic while control-plane software runs on the Cortex-A9 cores. When designing with this device, plan the PCB for the 31x31 mm FBGA land pattern with microvia stack-ups and matched-length high-speed transceiver traces. Thermal management must account for the dual power domains (FPGA core and HPS); consult the device-specific power estimator (EPE) before finalizing the thermal solution. This page synthesizes distributor pricing, drop-in alternative MPNs from the Intel Cyclone V SoC family, and practical design notes — information not aggregated on any single distributor or manufacturer page.

RFQ تماس

5CSXFC5D6F31I7N

5CSXFC5D6F31I7N - Cyclone V SX SoC FPGA, 85K LE, Dual ARM Cortex-A9

The Intel (formerly Altera) 5CSXFC5D6F31I7N is a Cyclone V SX System-on-Chip (SoC) FPGA that integrates a hard dual-core ARM Cortex-A9 MPCore processor with CoreSight debug technology alongside an FPGA fabric of 85K logic elements. Housed in a 896-ball FineLine BGA package (31x31 mm) and rated for the industrial -40C to +100C temperature range, the device combines a programmable logic subsystem with an applications processor subsystem on a single 28nm low-power die. Operating from a 1.1V core supply, it supports core frequencies up to 800 MHz on the HPS side and is engineered for low-power, high-functional-density embedded applications. A Cyclone V SX SoC is a heterogeneous computing device that merges a Field-Programmable Gate Array (FPGA) fabric with a Hard Processor System (HPS) in one package, allowing deterministic hardware acceleration and software programmability to coexist on the same silicon. Within the broader taxonomy, it sits as an SoC variant of the Cyclone V family under low-power FPGAs and is typically used where designers need parallel I/O processing, custom peripherals, or DSP acceleration alongside a Linux-capable ARM host. The integrated dual-core ARM Cortex-A9 MPCore delivers 800 MHz of application-class compute, while the FPGA fabric provides parallel datapaths for protocol bridging, motor control, and signal conditioning. Key features of the 5CSXFC5D6F31I7N include 85,000 logic elements, embedded 18x18 multipliers for DSP, hard memory controllers supporting DDR2/DDR3/LPDDR2, high-speed transceivers, and FPGA-to-HPS bridges that enable tightly coupled data movement between the two domains. The 896-ball FBGA footprint also exposes multi-standard I/O banks that support LVDS, LVTTL, LVCMOS, and RSDS at speeds up to several hundred megabits per second. Industrial-grade screening plus the SoC integration reduce board area and BOM cost compared to a discrete host processor plus FPGA approach. Typical applications span industrial motor control, factory automation gateways, automotive ADAS prototyping, video surveillance encoders, Software Defined Radio (SDR) baseband stages, and portable medical instrumentation. Engineers choose the 5CSXFC5D6F31I7N when a design requires deterministic hardware logic for I/O or DSP tightly coupled with a Linux-capable host, all in a single industrial-temperature SoC. When designing the board, pay close attention to the FPGA-HPS bridge topology, multi-rail power sequencing (1.1V core plus 2.5V/3.3V I/O), and DDR3 trace length matching. Because the device is BGA with a 1.0 mm ball pitch, a 6- or 8-layer PCB with microvia stackups is recommended; decoupling must follow Intel's Cyclone V hardware design guide for signal-integrity and thermal relief.

RFQ تماس

5CSXFC6C6U23A7N

5CSXFC6C6U23A7N - Cyclone V SX SoC FPGA, 110K LE, Dual ARM A9 | Intel

The Intel 5CSXFC6C6U23A7N is a Cyclone V SX family System-on-Chip (SoC) FPGA integrating a hard dual-core ARM Cortex-A9 MPCore processor with CoreSight debug, paired with 110K logic elements (LE) of FPGA fabric, in a 672-pin UBGAFBGA package measuring 23x23 mm. It combines programmable logic (110K LE, 224 DSP blocks, 5.4 Mbit embedded memory) with a 32-bit application processor subsystem running up to 925 MHz, plus high-speed transceivers, on a TSMC 28nm LP process. A System-on-Chip FPGA is an integrated device that merges a general-purpose applications processor (typically ARM Cortex-A) with programmable FPGA fabric on a single die, connected through a high-bandwidth interconnect backbone. SoC FPGAs sit within the broader hierarchy of programmable logic devices (CPLD -> FPGA -> SoC FPGA -> Adaptive Compute Acceleration Platform), enabling designers to combine deterministic hardware acceleration in the FPGA with software flexibility in the processor subsystem. This category is widely used in industrial motor control, automotive driver assistance, broadcast equipment, and machine vision where tight coupling between custom hardware datapaths and an OS-hosted application is required. Key features of the 5CSXFC6C6U23A7N include 110K logic elements, 5,140 Kbit embedded RAM (M20K blocks), 224 18x18 multipliers (DSP blocks), 364 LVDS-capable user I/O pins, hard memory controllers for DDR2/DDR3/LPDDR2, six 3.125 Gbps transceivers, and the hard processor subsystem (HPS) with dual ARM Cortex-A9 cores, NEON media engine, 32 KB I-cache + 32 KB D-cache per core, 512 KB shared L2, ECC-protected SDRAM controller, and integrated CoreSight debug. The device operates from a 1.1 V core supply with industrial-grade temperature range support. The architecture uses a TSMC 28nm Low Power process with the HPS and FPGA connected via an ARM AXI-based coherent interconnect, allowing accelerator logic in the FPGA to DMA-share buffers with the processor without external bridges. The transceiver blocks support PCIe Gen2 x4 and multiple serial protocols, enabling high-throughput I/O for embedded vision and communications. Typical applications include industrial machine vision cameras, motor control and industrial drives, automotive ADAS prototypes, software-defined radio front-ends, broadcast video processing, and factory-automation controllers. The combination of ARM Cortex-A9 software ecosystem with Cyclone V FPGA fabric is well suited to designs that need deterministic real-time control plus Linux-hosted application logic on one device. Design consideration: the HPS and FPGA fabrics must boot from separate configuration sources - the FPGA portion is typically loaded from QSPI flash while the HPS boots from SD card or QSPI - so designers must partition boot images carefully and validate both bitstreams before releasing product firmware. Power sequencing requires the 1.1 V core rail to come up before the HPS I/O rails to avoid latch-up. This page synthesizes current distributor pricing, same-package drop-in alternatives, and practical HPS/FPGA partitioning guidance drawn from the manufacturer datasheet and reference designs - context not consolidated in any single distributor product page.

RFQ تماس

5CSXFC6C6U23C6N

5CSXFC6C6U23C6N - Cyclone V SX SoC FPGA, 110K LE, 925MHz | Intel

The Intel 5CSXFC6C6U23C6N is a Cyclone V SX System-on-Chip (SoC) FPGA integrating a Dual ARM Cortex-A9 MPCore hard processor system with CoreSight debug and trace alongside an FPGA fabric of 110K logic elements. Housed in a 672-ball UFBGA (UBGA) package measuring 23x23 mm, the device operates at up to 925 MHz fabric performance on TSMC's 28 nm low-power process and supports a 1.1 V core supply rail. A System-on-Chip (SoC) FPGA combines a hard processor subsystem with programmable logic on a single die, enabling deterministic hardware acceleration alongside a software runtime. The Cyclone V SX family sits inside Intel's broader programmable logic hierarchy: SoC FPGA -> FPGA -> Programmable Logic Device -> Semiconductor. The hard ARM Cortex-A9 dual core runs an OS or RTOS while the FPGA fabric implements custom datapath, signal processing, or interface glue logic, eliminating the need for a separate companion processor on the board. Key features include 110K logic elements, embedded DSP blocks, embedded M10K and MLAB memory blocks, integrated transceivers supporting common serial protocols, hard memory controllers for DDR3, and a hard PCIe Gen2 endpoint. The part offers approximately 4,160 Kbits of embedded RAM and roughly 112 DSP blocks. Peripherals include EMAC, USB 2.0 OTG, NAND flash controller, SPI, UART, I2C, and GPIO routed through the HPS-to-FPGA bridge. Typical applications include industrial machine vision, motor control, software-defined radio front ends, factory automation controllers, broadcast video processing, and automotive driver assistance prototypes. Designers choose this part when they need ARM Cortex-A9 software processing tightly coupled with parallel FPGA datapath on one die. When designing with this device, pay close attention to UFBGA-672 PCB layout. The 23x23 mm package requires microvia or via-in-pad PCB technology for reliable BGA fanout. Use Intel's Quartus Prime design suite for synthesis, place-and-route, and HPS configuration. Plan for the 1.1 V core rail with adequate decoupling and thermal management under heavy DSP utilization. This page synthesizes distributor pricing for 5CSXFC6C6U23C6N, drop-in same-package alternatives within the Cyclone V SX family, and practical design notes not consolidated in the Intel Cyclone V device datasheet alone.

RFQ تماس

5CSXFC6C6U23C7N

5CSXFC6C6U23C7N - Cyclone V SX SoC FPGA, 110K LE, 672-UBGA | Intel

The Intel 5CSXFC6C6U23C7N is a Cyclone V SX System-on-Chip FPGA integrating a dual-core ARM Cortex-A9 MPCore hard processor system with CoreSight debug fabric and an 110K-logic-element FPGA fabric, housed in a 672-pin UBGA (23x23 mm) package. It targets embedded compute and DSP applications where software execution, hardware acceleration, and low-power operation must coexist on a single die. The device combines a 32-bit application processor subsystem, on-chip peripherals, and high-speed serial transceivers in a cost-optimized 28-nm low-power process. A System-on-Chip (SoC) FPGA is a hybrid device that pairs a programmable logic fabric with one or more hard processor cores on the same silicon die. The hard processors execute an operating system and control-plane code, while the FPGA fabric accelerates parallel datapaths, custom peripherals, and time-critical DSP. This architecture reduces board area, BOM cost, and inter-chip latency compared with a discrete CPU-plus-FPGA solution, and is widely adopted in industrial control, video processing, motor drive, and machine-vision designs. The 5CSXFC6C6U23C7N integrates approximately 110K logic elements, 5,140 Kbits of embedded memory, 224 18x18 multipliers, and six 3.125 Gbps transceivers. The hard processor system runs up to 800 MHz per core with 32 KB I-cache, 32 KB D-cache per core, and a 512 KB shared L2 cache. Peripherals include USB 2.0, Gigabit Ethernet, CAN, UART, SPI, I2C, and DDR2/DDR3 controller with ECC support. Architecturally, the device uses a column-based ALM fabric with adaptive logic modules supporting 8-input fracturable look-up tables, providing an efficient mix of register-rich and arithmetic-intensive paths. The transceiver block delivers up to 3.125 Gbps per channel for PCIe Gen2 x1/x2, gigabit Ethernet, and serial RapidIO links, while the variable-precision DSP blocks enable single-cycle 18x18 or dual-cycle 27x27 multiply-accumulate operations. Typical applications include industrial machine vision, motor control and drives, software-defined radio baseband, broadcast video processing, and ruggedized military/aerospace platforms. The combination of hard ARM cores, deterministic low-latency fabric, and integrated transceivers lets one device replace a multi-chip CPU+FPGA design in space-constrained embedded systems. Designers should note that this member of the Cyclone V SX family uses the U672 package and operates over the commercial 0C to 85C junction temperature range with a core speed grade of -7. Pin-compatible migration paths include the lower-logic-density 5CSXFC5C6U23C7N and 5CSXFC4C6U23C7N, and the lower-speed -6 grade 5CSXFC6C6U23C6N for cost reduction. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers select the correct Cyclone V SX variant and avoid costly board respins.

RFQ تماس

5CSXFC6C6U23C8N

5CSXFC6C6U23C8N - Cyclone V SX SoC FPGA, 110K LE, ARM Cortex-A9 | Intel

The Intel 5CSXFC6C6U23C8N is a Cyclone V SX System-on-Chip (SoC) FPGA integrating a dual-core ARM Cortex-A9 MPCore hard processor system with CoreSight debug, paired with 110K logic elements of low-power 28nm FPGA fabric, all housed in a 672-pin UFBGA (UBGA) package measuring 23x23 mm. The device operates at up to 600 MHz processor clock and supports industrial-grade temperature conditions. The 5CSXFC6 family balances high functionality, flexibility, and power efficiency, making it suitable for cost-sensitive embedded applications that need both deterministic FPGA acceleration and a Linux-capable application processor. An SoC FPGA is a class of programmable logic device that combines a hard processor core with an FPGA fabric on a single die, reducing board area, power, and bill-of-materials relative to a two-chip CPU-plus-FPGA solution. Within the broader taxonomy, SoC FPGAs sit between discrete microcontroller + FPGA pairs and fully integrated ASSPs, offering software programmability for control-plane tasks and hardware reconfigurability for data-plane acceleration. The Cyclone V SX series in particular is the higher-performance tier that adds integrated transceivers alongside the dual-core ARM subsystem. Key features of the 5CSXFC6C6U23C8N include 110,000 logic elements, embedded M10K memory blocks, variable-precision DSP blocks, integrated 3.125 Gbps transceivers, and a hard memory controller supporting DDR2/DDR3/LPDDR2. The Cortex-A9 subsystem includes NEON media-processing engine, single/double-precision FPU, and 32 KB L1 instruction and data caches plus 512 KB shared L2 cache. Industrial-grade silicon ensures operation from -40C to +100C (junction). The Cyclone V SX architecture uses TSMC's 28nm low-power process, providing an optimal balance of static and dynamic power. Hard IP blocks such as the PCIe Gen2 controller, Ethernet MACs, and the HPS peripheral set are pre-verified silicon, allowing designers to skip RTL development for common functions. Compared with the Cyclone V SE sub-family, the SX variant adds transceiver capability for protocols such as GigE, CPRI, and LVDS-based interfaces. Typical applications include industrial motor control with deterministic FPGA co-processing, factory automation gateways, medical imaging pre-processing, video surveillance encoders, and software-defined radio baseband. The dual-core ARM subsystem runs Linux or RTOS while the FPGA fabric handles real-time DSP and high-speed I/O. Per Intel's Cyclone V device datasheet, the SoC also targets smart-grid and energy-management use cases where hardware determinism and processor flexibility must coexist on one die. When designing with the 5CSXFC6C6U23C8N, engineers should follow Intel's HPS-to-FPGA bridge guidelines for AXI transactions and ensure proper decoupling on the multi-rail HPS/FPGA supply domains. The 672-ball UFBGA package requires PCB design rules compliant with JEDEC moisture sensitivity level 3, including dry-pack handling prior to reflow. Designers must also plan the boot configuration (QSPI, SD, NAND) and the HPS pin multiplexing early in the schematic phase. This page synthesizes distributor pricing, drop-in same-package alternatives from the same Cyclone V SX family, and practical design notes that complement the official Cyclone V device datasheet. Cross-brand drop-in equivalents in the same 672-pin UFBGA footprint are not common for a mid-range SoC FPGA, so the alternatives list below is curated primarily from same-brand family members.

RFQ تماس

5CSXFC6C6U23C8NES

5CSXFC6C6U23C8NES - Cyclone V SX SoC FPGA 110K LE | Intel

The Intel (formerly Altera) 5CSXFC6C6U23C8NES is a Cyclone V SX family System-on-Chip (SoC) FPGA that integrates a dual-core ARM Cortex-A9 MPCore hard processor subsystem with a 110K logic-element FPGA fabric in a 672-pin UBGА (23x23 mm) package. The part is specified for the commercial speed grade 8 operating range and is built on TSMC's 28nm low-power process, delivering up to 600 MHz per Cortex-A9 core alongside approximately 5,150 Kbits of embedded memory and 224 user I/O pins. What is an SoC FPGA? An SoC FPGA combines a general-purpose microprocessor subsystem (here, dual ARM Cortex-A9 cores with CoreSight debug, NEON media engine and single/double-precision floating point) with a programmable FPGA fabric on a single die. This heterogeneous architecture sits inside the broader hierarchy of programmable logic devices (CPLD -> FPGA -> SoC FPGA), enabling hardware acceleration of performance-critical tasks while running a Linux or RTOS software stack on the hard cores - a pattern used to balance deterministic latency with software flexibility. Key features of the 5CSXFC6C6U23C8NES include 110K logic elements, 3.75 Kbits of M10K block memory plus 555 Kbits of MLAB, 112 18x19 multipliers, support for DDR2/DDR3/LPDDR2 external memory interfaces, and dual PCIe Gen2 hard IP blocks. The hard processor subsystem includes NEON SIMD media engine, Vector Floating Point v3 unit, 32KB L1 instruction/data caches per core, and 512KB shared L2 cache. Peripherals include two Ethernet MACs, two USB 2.0 OTG controllers, two CAN, two SPI, four UART, and two I2C controllers, making it a true system-on-chip. The Cyclone V SX architecture targets low-power, cost-sensitive applications where integration reduces BOM count and PCB complexity. The 28nm process combined with power-aware compiler features allows the device to operate in designs that require fanless thermal envelopes while still providing tens of GMACs of DSP throughput via the variable-precision DSP blocks. Typical applications include industrial machine vision systems, motor control and drives, automotive driver assistance units, video surveillance, broadcast equipment, and embedded server appliances. The combination of ARM Cortex-A9 cores plus FPGA fabric makes it ideal for protocol bridging, deterministic real-time control, and software-defined signal processing. Design consideration: provide separate power rails for the HPS (typically 1.1V core) and FPGA fabric, and follow Altera's pin connection guidelines to leave unused HPS pins at defined states. Boot configuration (NAND, SD/MMC, QSPI) and HPS-FPGA bridge clocking must be validated against the board bring-up checklist. This page synthesizes distributor pricing, drop-in same-package alternatives, and design notes that complement the manufacturer datasheet.

RFQ تماس

5CSXFC6C6U23I7LN

5CSXFC6C6U23I7LN - Cyclone V SX SoC FPGA 110K LE | Altera

The Altera (Intel) 5CSXFC6C6U23I7LN is a Cyclone V SX System-on-Chip FPGA integrating 110K logic elements with a dual-core ARM Cortex-A9 MPCore hard processor system (HPS) and CoreSight debug fabric, housed in a 672-pin UBGA package measuring 23x23 mm with industrial -40C to 100C temperature grade. The device combines a low-power FPGA fabric built on TSMC's 28 nm process with the HPS subsystem, achieving up to 925 MHz ARM core frequency and configurable FPGA performance that suits cost-sensitive embedded applications. A System-on-Chip FPGA is a single silicon device that combines a general-purpose microprocessor subsystem with a programmable FPGA fabric, allowing hardware accelerators and I/O peripherals to be customized while the processor runs application software. In the broader taxonomy, an SoC FPGA sits between pure FPGAs (logic only) and Application Processors (software only), offering the best of both: deterministic hardware parallelism plus the flexibility of an ARM Cortex-A9 Linux-capable host. Cyclone V SX devices are positioned in the low-power segment of Intel's FPGA portfolio, targeting applications that need a balance of functionality, flexibility, and power efficiency. Key features of the 5CSXFC6C6U23I7LN include 110K logic elements, 5,140 Kbits of embedded memory, variable-precision DSP blocks supporting 18x18 and 27x27 multipliers, integrated transceivers, and the dual-core ARM Cortex-A9 MPCore HPS with NEON media engine, single/double-precision FPU, and CoreSight debug. The 672-pin UBGA package exposes the full HPS peripheral set (USB, GbE, SD/SDIO/MMC, UART, SPI, I2C) plus FPGA I/O banks supporting LVDS, LVCMOS, SSTL, and memory interfaces such as DDR3, DDR2, and LPDDR2. The architecture pairs the HPS subsystem with the FPGA logic through high-bandwidth AXI/ARM AMBA bridges, allowing peripherals to be placed in either domain. This lets designers offload latency-critical or parallel DSP functions to the FPGA while the HPS runs an operating system, simplifying PCB design by eliminating a separate processor chip. Typical applications include industrial motor control, factory automation controllers, software-defined radio, medical imaging, broadcast video processing, and automotive ADAS prototyping. The Cyclone V SX SoC FPGA is well suited for designs that need a Linux-capable host CPU with deterministic FPGA acceleration in a single 28 nm low-power device. When designing with the 5CSXFC6C6U23I7LN, ensure the 672-pin UBGA PCB footprint matches the 23x23 mm land pattern and that the multi-rail power supply (typically 0.85V/1.1V/1.5V/1.8V/2.5V/3.3V) follows the Intel Cyclone V power design guidelines. The HPS boot configuration (NAND/NOR/SD/eMMC) and pin multiplexing must be set up in the Quartus Prime Platform Designer before bitstream generation. This page consolidates distributor stock, datasheet links, and drop-in alternative guidance drawn from Intel's Cyclone V device datasheet and live distributor listings, providing information not present in any single source.

RFQ تماس

5CSXFC6C6U23I7N

5CSXFC6C6U23I7N - Cyclone V SX SoC FPGA, 110K LE, 672-UBGA | Intel

The Intel 5CSXFC6C6U23I7N is a Cyclone V SX System-on-Chip (SoC) FPGA that integrates a dual-core ARM Cortex-A9 MPCore hard processor system (HPS) with 110,000 programmable logic elements in a 672-pin UBG-A (23x23 mm) package. It operates at up to 800 MHz on the HPS, is built on a 28 nm TSMC low-power process, and uses a 1.1 V core supply. This combination places it in the SoC FPGA product class that fuses a deterministic hardware fabric with a general-purpose application processor on one die. A System-on-Chip FPGA is an integrated device that combines a hard processor subsystem with programmable logic on a single silicon die, allowing designers to partition tasks between software running on the ARM core and hardware accelerators implemented in the FPGA fabric. This heterogeneous architecture reduces bill-of-materials cost, board area, and power consumption compared with using a discrete microprocessor plus a standalone FPGA, while preserving the deterministic latency of hardware logic. The Cyclone V SX product line (hypernym: SoC FPGA -> FPGA -> programmable logic -> semiconductor device) targets industrial motor control, video surveillance, automotive driver assistance, and protocol bridging. Key differentiating features of the 5CSXFC6C6U23I7N include dual-core ARM Cortex-A9 MPCore with CoreSight debug and trace, a 32-bit DDR3 SDRAM controller with ECC support inside the HPS, and integrated peripheral IPs (EMAC, USB 2.0, CAN, SPI, I2C, UART) implemented as hardened blocks rather than soft logic. A high-bandwidth interconnect bridge ties the HPS to the FPGA fabric, allowing low-latency message passing between software tasks and custom accelerators without consuming fabric resources. Typical applications for the 5CSXFC6C6U23I7N include industrial motor drives, factory automation controllers, video processing and surveillance systems, automotive infotainment and ADAS preprocessing, and protocol bridging between industrial Ethernet and legacy fieldbuses. The combination of Cortex-A9 cores for Linux or RTOS control loops and FPGA fabric for deterministic I/O makes this part well suited for mixed software/hardware designs. When designing with this device, plan the power sequencing for the HPS and FPGA rails separately and use the dedicated HPS cold/warm reset inputs. The 672-pin UBG-A package requires a 23x23 mm, 1.0 mm ball-pitch land pattern, so PCB fabrication must support fine-pitch BGA assembly and X-ray or endoscopic inspection is recommended for first-article builds. This page synthesizes distributor pricing, package drop-in alternatives, and design notes not found in the manufacturer datasheet alone.

RFQ تماس

5CSXFC6C6U23I7NTS

5CSXFC6C6U23I7NTS - Cyclone V SX SoC FPGA, 110K LE, 925MHz | Intel

The Intel (formerly Altera) 5CSXFC6C6U23I7NTS is a Cyclone V SX series System-on-Chip (SoC) FPGA integrating a dual-core ARM Cortex-A9 MPCore hard processor system with CoreSight debug, combined with a 110K logic-element FPGA fabric, in a 672-pin Ultra BGA (UBGA) package measuring 23x23 mm. The device is built on TSMC's 28 nm low-power process and supports up to 925 MHz processor clock plus integrated high-speed transceivers and variable-precision DSP blocks. What is a Cyclone V SX SoC FPGA? It is a heterogeneous compute device that combines an applications-grade ARM Cortex-A9 hard processor system (HPS) with a programmable FPGA fabric on a single die. The SoC class sits in the broader taxonomy: SoC FPGA -> FPGA + ASIC -> programmable logic -> semiconductor device. Compared with traditional two-chip solutions (a standalone FPGA plus a separate ARM MCU), the Cyclone V SX SoC reduces board area, lowers latency between HPS and FPGA, and simplifies power-rail sequencing. Key features include 110K logic elements, embedded ARM Cortex-A9 MPCore dual-core processor, variable-precision DSP blocks, integrated high-speed transceivers supporting common serial protocols, and a hard memory controller. The device supports DDR2/DDR3/LPDDR2 external memory and offers multiple I/O standards (LVDS, LVCMOS, SSTL) on its general-purpose I/O banks. Configuration is via standard JTAG, Active Serial (AS), or Passive Serial (PS) modes. The Cyclone V SX architecture uses an enhanced M20K embedded memory block (20 Kb per block) for distributed buffering and a logic-element array with adaptive logic modules. The HPS subsystem includes its own L1/L2 cache hierarchy, NEON media-processing engine, and dedicated peripherals (EMAC, USB, NAND flash controller, SPI, I2C, UART), freeing the FPGA fabric for high-throughput datapath and DSP work. Typical applications include industrial motor control and machine vision, factory automation HMI controllers, portable medical imaging, broadcast video processing, defense ruggedized embedded systems, and smart-grid communications. The combination of ARM Cortex-A9 general-purpose computing with FPGA fabric acceleration is ideal for deterministic real-time processing pipelines. When designing with this device, follow Intel's Cyclone V SoC PCB layout guidelines: provide separate 1.0V core and 1.5V/1.8V/2.5V I/O rail decoupling, share a common reference plane for HPS and FPGA decoupling, and use the Boot Select and MSEL pins to configure the desired configuration scheme at reset. This page synthesizes drop-in same-package Cyclone V SX alternatives, real distributor pricing, and practical design notes not consolidated in any single manufacturer or distributor document.

RFQ تماس

5CSXFC6D6F31A7N

5CSXFC6D6F31A7N - Cyclone V SX SoC FPGA, 110K LE, 896-FBGA | Intel

The Intel (Altera) 5CSXFC6D6F31A7N is a Cyclone V SX System-on-Chip (SoC) FPGA integrating a dual-core ARM Cortex-A9 MPCore hard processor system with CoreSight debug, paired with 110K logic elements of FPGA fabric, packaged in a 896-ball FineLine BGA (31x31 mm). It is rated for industrial temperature operation, supports up to 700 MHz HPS clock, and is AEC-Q100 qualified for automotive-grade designs. The device merges application-class ARM processing with low-power FPGA fabric on a single die, eliminating external processor-to-FPGA interconnect bottlenecks. What is a Cyclone V SoC FPGA? The Cyclone V family is a low-power 28nm FPGA platform from Intel (formerly Altera). An SoC FPGA embeds a Hard Processor System (HPS) - typically ARM Cortex-A9 cores with peripherals, memory controllers, and interconnect - alongside programmable logic on a single chip. This architecture sits within the hierarchy: SoC FPGA -> FPGA -> programmable logic -> digital IC -> semiconductor. The integration reduces board area, BOM cost, and power versus a two-chip CPU-plus-FPGA design, while enabling high-bandwidth FPGA-to-HPS bridges for hardware acceleration. Key features of 5CSXFC6D6F31A7N include 110,000 logic elements, embedded hard memory controllers, transceiver-rich HPS peripherals, and a 1.1 V core supply optimized for low static and dynamic power. The 896-FBGA package exposes 288 user I/O pins and supports high-speed external memory interfaces including DDR2/DDR3, LPDDR2, and QDR II+. Integrated hard IP blocks (PCIe Gen2, GbE, USB 2.0 OTG, NAND flash controller, SD/MMC) reduce soft-logic utilization for common functions. Architecturally, the SX variant combines the HPS with approximately 110K LE of 28nm FPGA fabric, supporting up to ~5.5 Mbits of embedded memory and up to 224 DSP blocks (18x18 multipliers). The HPS-to-FPGA bridge provides multi-Gbps AXI/ Avalon coherent interconnect, enabling hardware accelerators to be tightly coupled to the ARM cores. The 1.1 V core voltage reduces dynamic power versus prior 40nm Cyclone IV designs by up to 40 percent at equivalent performance. Typical applications include automotive driver-assistance vision pre-processing, industrial machine vision and motor control, video surveillance analytics, factory HMI, and portable medical imaging pre-processing. The automotive temperature grade (AEC-Q100) and integrated ARM cores suit designs that require both deterministic real-time control and rich OS-level software stacks (Linux, RTOS). When designing with this device, ensure the PCB BGA layout follows Intel's recommended escape routing and decoupling guidelines for the 896-pin package. Power sequencing between the HPS and FPGA rails must follow the Cyclone V hardware reference manual; the POR (power-on reset) circuit must hold the HPS in reset until all HPS rails are stable to prevent boot corruption. This page synthesizes distributor pricing, drop-in same-package alternatives, and PCB/thermal design notes not found in the manufacturer datasheet alone.

RFQ تماس

5CSXFC6D6F31C6N

5CSXFC6D6F31C6N - Cyclone V SX SoC FPGA 110K LE | Intel

The Intel (formerly Altera) 5CSXFC6D6F31C6N is a Cyclone V SX SoC FPGA integrating a dual-core ARM Cortex-A9 MPCore hard processor system with CoreSight debug and 110,000 logic elements of FPGA fabric in a 896-pin FBGA (31x31 mm) package. The hard processor system runs up to 925 MHz with NEON media engine and single/double precision FPU, while the FPGA fabric delivers up to 5.44 Mbit embedded memory, 224 18x18 multipliers, and integrated PCIe Gen2 hard IP blocks. A SoC FPGA (System-on-Chip Field Programmable Gate Array) is a single silicon device that combines a hardened application processor subsystem with programmable logic. In the broader hierarchy, this places the 5CSXFC6D6F31C6N as a SoC FPGA within the FPGA family, which itself sits under programmable logic devices, digital ICs, and ultimately semiconductors. The HPS (Hard Processor System) executes operating systems such as Linux or RTOS while the FPGA fabric accelerates custom datapath, signal processing, or interface logic — a hybrid architecture far more power-efficient than separate processor-plus-FPGA designs on high-volume, cost-sensitive applications. Key features include the dual-core ARM Cortex-A9 with 32 KB I-cache and 32 KB D-cache per core, ARM NEON SIMD and FPU, CoreSight debug, multiport SDRAM controller with ECC, and 288 general-purpose user I/O (GPIO). The FPGA fabric provides 110K logic elements, 5.44 Mbit embedded SRAM, 112 DSP blocks (18x18 multipliers), 6 phase-locked loops, and 6 transceiver blocks. Two on-chip PLLs supply independent clock domains for the HPS and FPGA fabric. Cyclone V devices are fabricated on TSMC's 28 nm low-power process, which reduces both static and dynamic power versus prior 40 nm Cyclone IV generations. The integrated hard IP for PCIe Gen2 (x1/x2/x4 lanes up to 5 Gbps), Ethernet MAC, USB 2.0 OTG, and DDR3/DDR3L/DDR4 SDRAM controllers offloads I/O handling from soft logic, freeing FPGA fabric for differentiated custom logic. Typical applications include industrial motor control and machine vision, automotive driver assistance systems, video surveillance and broadcast equipment, wireless backhaul baseband, factory automation controllers, and military/aerospace image processing. The HPS runs protocol stacks or real-time control loops while the FPGA fabric performs high-throughput parallel DSP, sensor fusion, or video pipeline processing. When designing with the 5CSXFC6D6F31C6N, use Intel Quartus Prime (Standard or Pro edition) for synthesis, place-and-route, and HPS configuration. Provide separate power rails for the HPS and FPGA fabric plus a high-fidelity DDR3 reference clock. The 31x31 mm FBGA-896 requires a multi-layer PCB with controlled-impedance routing for DDR3 and transceiver channels. This page synthesizes distributor pricing, drop-in same-family alternatives, parameter-by-parameter comparison, and practical design notes not consolidated on any single distributor or datasheet page — providing an engineer-ready snapshot that complements the official Intel Cyclone V Device Datasheet.

RFQ تماس

5CSXFC6D6F31C7N

5CSXFC6D6F31C7N - Cyclone V SX SoC FPGA, 110K LE, 896-FBGA | Intel

The Intel 5CSXFC6D6F31C7N is a Cyclone V SX SoC FPGA integrating a dual-core ARM Cortex-A9 MPCore hard processor system with CoreSight debug, paired with 110K logic elements of 28 nm low-power FPGA fabric and integrated 3.125 Gbps transceivers, packaged in a 31 x 31 mm 896-ball FBGA (31x31). The device operates at up to 800 MHz on the HPS side and supports variable-precision DSP blocks for high-throughput signal processing, making it well suited for mixed-control-and-datapath designs. Per the Cyclone V Device Datasheet, it is offered with a 1.1 V core supply and an industrial temperature-grade "I" speed-grade option also exists in the family; this C7N variant is commercial temperature, speed grade 7. An SoC FPGA (System-on-Chip Field Programmable Gate Array) is a heterogeneous device that combines a general-purpose application processor subsystem with programmable logic on a single die, allowing hardware-accelerated peripherals, custom interfaces, and parallel DSP pipelines to be implemented alongside a Linux-capable host. Within Intel's portfolio, the Cyclone V SX family sits below the higher-end Cyclone V ST and above the SE family, targeting low-power, transceiver-equipped embedded systems where deterministic latency and processor integration matter more than maximum logic density. Key differentiating features of the 5CSXFC6D6F31C7N include 110K logic elements, embedded hard memory blocks, fractional PLLs, 3.125 Gbps transceivers (channel count depends on package speed-grade), a 32-bit DDR3 controller in the HPS, and integrated PCIe Gen2 hard IP. The 896-FBGA (31x31) package exposes the maximum transceiver count and HPS peripheral set of the Cyclone V SX family, supporting industrial and commercial embedded applications requiring parallel I/O. Architecturally, the FPGA fabric uses an 8-input adaptive logic module (ALM) feeding 110K logic elements, M20K (20 Kb) block memory, and variable-precision DSP blocks capable of 18x18 or 27x27 multiplication. The HPS includes dual ARM Cortex-A9 cores, 32 KB L1 per core, 512 KB shared L2, NEON media engine, and a hard SDRAM controller supporting DDR3 up to 1066 Mbps. Hard IP for PCIe Gen2 (x4/x8 lanes depending on variant) reduces logic utilization and power. Typical applications include industrial motor control and factory automation gateways, video surveillance and image processing pipelines, military and aerospace signal processing, and embedded vision systems. The combination of an HPS running Linux and FPGA-accelerated image pipelines makes it well suited for smart-camera, machine-vision, and protocol-bridging designs. When designing with this device, allocate sufficient PCB area for decoupling and follow Intel's pinout guidelines for the 896-FBGA package. The C7 speed grade and 0C to +85C commercial temperature range suit general-purpose embedded products, while the I7N variant extends to industrial (-40C to +100C). This page synthesizes distributor pricing, same-family drop-in alternatives, and design notes drawn from the official Cyclone V datasheet.

RFQ تماس

5CSXFC6D6F31C8N

5CSXFC6D6F31C8N - Cyclone V SX SoC FPGA, 110K LE, Dual ARM Cortex-A9 | Intel

The Intel (formerly Altera) 5CSXFC6D6F31C8N is a Cyclone V SX System-on-Chip (SoC) FPGA that integrates a dual-core ARM Cortex-A9 MPCore hard processor system (HPS) with CoreSight debug alongside 110K logic elements of low-power 28 nm FPGA fabric, packaged in a 896-ball FBGA (31x31 mm, F31). According to the Cyclone V device datasheet, the HPS runs at up to 600 MHz with NEON media engine and single/double-precision FPU, while the FPGA fabric delivers variable-precision DSP blocks and up to 6.144 Mb of embedded memory. A Cyclone V SoC FPGA is a heterogeneous compute device that combines a hardened application processor subsystem with programmable logic on a single die. In the broader taxonomy, the 5CSXFC6 sits within the Cyclone V family of low-power FPGAs and SoCs, positioned in Intel's FPGA portfolio below Arria 10 and Stratix 10. Compared with soft-core processor implementations in FPGA fabric, an SoC FPGA reduces BOM count, lowers system power by eliminating external processor-to-FPGA bridges, and shortens latency between ARM Cortex-A9 software and FPGA hardware accelerators through the AXI/FPGA-to-HPS bridge fabric. Key features include dual ARM Cortex-A9 MPCore at up to 600 MHz with CoreSight debug, 110K logic elements, 6.144 Mb embedded SRAM, 224 variable-precision DSP blocks built on 18x19 multipliers, integrated transceivers on selected speed grades, hard memory controllers supporting DDR3 and LPDDR2, and a hardened PCI Express Gen2 x4 rootport/endpoint. The device supports the -40C to +85C extended industrial temperature range and operates from a 1.1 V core rail with multi-rail power management. The 5CSXFC6D6F31C8N uses TSMC's low-power 28 nm process, allowing the HPS to be powered independently from the FPGA fabric for fine-grained power gating. Configuration is supported via active serial (AS), passive serial (PS), fast passive parallel (FPP), and JTAG modes, with bitstream encryption and authentication available through the security block. Typical applications include industrial motor control and machine vision, video surveillance and broadcast video processing, factory automation with EtherCAT/PROFIBUS, portable medical imaging, smart-grid substation controllers, and automotive ADAS pre-processing. The dual ARM cores offload Linux/OS tasks while the FPGA fabric accelerates deterministic DSP and image pipelines. When designing with this device, plan power-rail sequencing (1.1 V core before 2.5/3.3 V I/O before 1.5 V DDR) and use the Quartus Prime PowerPlay analyzer for thermal budgeting. For new designs, verify the specific OPN suffix (C8 = commercial speed grade 8) matches your target operating profile. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ تماس

5CSXFC6D6F31I7

5CSXFC6D6F31I7 - 110K Logic Elements, 800 MHz Cyclone V SX | Altera

Altera 5CSXFC6D6F31I7 is a Cyclone V SX system-on-chip FPGA integrating 110,000 logic elements with a dual-core ARM Cortex-A9 MPCore and CoreSight technology, an 800 MHz operating frequency, and 896-FBGA packaging in a 31 mm by 31 mm format. It combines programmable FPGA fabric with a hard processor system for applications requiring both hardware parallelism and software control. The device belongs to the Cyclone V SX family and is identified as a 5CSXC6 device in the F31 package designation. An FPGA is a field-programmable gate array, a semiconductor device whose logic and interconnects can be configured after manufacturing. An SoC FPGA integrates programmable logic with processor and memory-related system resources on one device. Within the system hierarchy, 5CSXFC6D6F31I7 spans FPGA architecture, SoC integration, embedded processing, and digital system design. This combination allows deterministic hardware acceleration alongside operating-system-based control, networking, protocol handling, and application processing. The principal device characteristics are 110,000 logic elements, 800 MHz frequency, and an 896-FBGA package. The Cyclone V SX architecture provides configurable logic for parallel datapaths, interface bridging, filtering, control, and signal processing. The dual ARM Cortex-A9 MPCore provides a programmable processing platform, while CoreSight technology supports system debug and trace functions. The package exposes 288 I/O according to the available distributor and catalog data. The device is suited to designs that need both FPGA acceleration and embedded software. Typical examples include industrial control equipment, communications infrastructure, video and imaging systems, test and measurement equipment, and embedded appliances. In these systems, the FPGA fabric can implement high-speed interfaces or repetitive processing operations while the ARM subsystem manages configuration, control, networking, and user applications. The 896-FBGA package requires careful PCB design, including controlled-impedance routing, signal-integrity analysis, decoupling placement, thermal assessment, and verification of the exact ball map and power requirements. Logic capacity and processor frequency are headline parameters, but designers must also validate power architecture, memory interfaces, I/O standards, configuration method, temperature grade, and timing closure. These details are not fully established by the supplied search excerpts and require the manufacturer documentation. The supplied data identifies the package as 896-FBGA and describes the device as a Cyclone V SX FPGA with 110,000 logic elements and 800 MHz operation. Verified distributor listings also report 288 I/O. Pricing is not established in the supplied distributor snippets. This page separates confirmed catalog values from parameters marked for datasheet verification.

RFQ تماس

5CSXFC6D6F31I7N

5CSXFC6D6F31I7N - Cyclone V SX SoC FPGA, 110K LE | Intel

The Intel 5CSXFC6D6F31I7N is a Cyclone V SX System-on-Chip FPGA integrating 110K logic elements, dual ARM Cortex-A9 MPCore processors with CoreSight debug, and hardware DSP blocks in a 896-pin FBGA (31x31 mm) package. The 'SX' device variant combines an FPGA fabric with a hard-processor system (HPS) featuring 800 MHz Cortex-A9 cores, delivering deterministic real-time performance alongside flexible programmable logic for cost- and power-sensitive embedded applications. Operating at a core voltage of 1.1V on a 28nm low-power process, the device targets industrial, automotive, and video/broadcast markets. A System-on-Chip (SoC) FPGA is an integrated circuit that fuses a general-purpose processor subsystem with an FPGA fabric on a single die. Within the broader taxonomy, the 5CSXFC6D6F31I7N occupies the role of programmable logic device -> FPGA -> SoC FPGA -> heterogeneous compute IC. The HPS subsystem includes peripherals, memory controllers, and a coherent interconnect, allowing designers to partition tasks deterministically between software running on Cortex-A9 and hardware-accelerated datapaths in the FPGA fabric. Key specifications include 110,000 logic elements, 224 (18x18) multipliers for DSP, embedded memory blocks totaling approximately 5.5 Mbits, and transceivers supporting multi-gigabit serial connectivity. The HPS delivers dual-core 800 MHz ARM Cortex-A9 with NEON media engine and single/double precision floating-point. The 896-FBGA package exposes 288 user I/Os and provides a substantial signal-breakout budget for memory, communication, and user-defined I/O. Industrial temperature grade (-40C to +100C) suits harsh-environment deployment. The Cyclone V architecture leverages TSMC's 28nm low-power process to balance static and dynamic power, with features such as low-power transceivers, partial reconfiguration, and clock networks optimized for energy efficiency. The hard ARM cores offload routine control tasks from the fabric, freeing logic resources for parallel datapath acceleration such as video pipelines, motor control, or signal processing. The coherent ACE interface enables L2 cache coherency between HPS and FPGA accelerators, reducing software overhead for shared-memory applications. Typical applications include industrial motor control and factory automation, video surveillance and image processing, automotive driver assistance and infotainment, software-defined radio (SDR), and medical imaging. The combination of deterministic ARM processing, programmable logic, and an extensive peripheral set makes this device especially attractive for systems requiring real-time response alongside high-throughput data manipulation. When designing with this part, allocate FPGA fabric and HPS bandwidth budgets concurrently during architectural planning. Designers should follow Intel's recommended power sequencing and decouple each supply rail per the Cyclone V hardware reference manual, and verify pin assignments against the dedicated 896-FBGA package pin-out file before PCB layout fabrication. Quartus Prime is the supported design environment for synthesis, place-and-route, and HPS software configuration. This page synthesizes distributor pricing, same-brand drop-in alternates from the Cyclone V SX family, and practical design considerations that complement (not duplicate) the official Cyclone V device datasheet and Cyclone V device overview PDF.

RFQ تماس

5L35023B-105NLGI

5L35023B-105NLGI - Programmable Clock Generator | Renesas

The Renesas Electronics 5L35023B-105NLGI is a VersaClock 3S programmable clock generator for low-power, consumer, and high-performance PCI Express applications. It uses a quartz crystal input and generates programmable clock outputs, while its OE pins can be configured as output enable, power-down, proactive power saving, dynamic frequency control, or reset functions. The device is available in the package designation represented by 5L35023B-105NLGI; exact package dimensions, pin names, frequency limits, voltage ratings, and electrical limits are not stated in the supplied verified records. A programmable clock generator is a timing IC that converts a reference input into one or more controlled output frequencies. It belongs to the clock and timing hierarchy, alongside clock generators, PLLs, frequency synthesizers, oscillators, and timing controllers. This category is important in digital systems because processors, serializers, communication links, memory interfaces, and PCI Express equipment require clocks with defined frequency, phase, and enable behavior. The verified Renesas product page identifies the 5L35023 as a VersaClock programmable clock generator. The verified datasheet search result states that specifications are characterized and guaranteed using a quartz crystal input. It also states that an LVPECL driver change requires selecting the appropriate R3 value. The same datasheet result identifies programmable OE-pin functions, allowing integration of output enable, chip power-down, proactive power saving, two-pin dynamic frequency control, and timer-associated reset functionality. The B-105NLGI ordering suffix distinguishes this exact Renesas orderable MPN from related 5L35023 variants. Because the supplied records do not expose a complete parameter table or package drawing, pin-level implementation, output frequency range, supply voltage, output format, operating temperature, and package dimensions remain to be confirmed from the manufacturer datasheet before layout or production release. The nearby 5L35023-105NLGI DigiKey result confirms that the broader 5L35023 family is sold as an integrated circuit, but it does not establish equivalence to the B-105NLGI suffix. Typical use cases include PCI Express clock distribution, low-power consumer electronics, embedded computing, communication equipment, and other systems requiring programmable timing. In a PCI Express design, the clock generator should be selected only after confirming reference frequency, output standard, jitter, supply voltage, configuration method, reset requirements, and package compatibility. In consumer or embedded systems, power-down and output-enable behavior can help control clock activity when the system is idle. Designers should begin with the crystal and load-capacitance requirements, then verify every datasheet limit and pin function. Decoupling should follow the manufacturer reference circuit, and PCB routing should preserve controlled-impedance clock paths and minimize noise coupling into sensitive analog or RF sections. Before purchasing or substituting the part, request the official Renesas datasheet and confirm the exact B-105NLGI ordering code.

RFQ تماس

5M1270ZF256A5N

5M1270ZF256A5N - MAX V CPLD, 980 Macrocells, 256-FBGA | Intel

The Intel 5M1270ZF256A5N is a high-density Complex Programmable Logic Device (CPLD) from the MAX V family, integrating 980 macrocells across 1270 logic elements in a 256-ball FineLine BGA (FBGA) 17x17 mm package. It delivers a maximum propagation delay (tpd) of 6.2 ns and an internal core frequency up to 201.1 MHz, while operating from a 1.71 V to 1.89 V internal supply, making it suitable for high-volume, low-cost programmable glue-logic applications. A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines multiple PAL/GAL macrocell arrays with a programmable interconnect matrix. Compared to small FPGAs, CPLDs offer deterministic timing, instant-on via on-chip flash, and high I/O-to-logic density at low unit cost, and they sit one level above simple PALs in the programmable logic taxonomy: PAL -> GAL -> CPLD -> FPGA. The MAX V family is Intel/Altera's lowest-power CPLD line, typically used as I/O expansion, bus bridging, or power-sequencing glue logic adjacent to an ASIC, ASSP, or microprocessor. Key features include in-system programmability via JTAG (IEEE 1149.1), 211 user I/O, support for multiple I/O standards including LVCMOS, LVTTL, and PCI on selected banks, and an operating junction temperature range of -40C to +125C. The device is AEC-Q100 qualified for automotive applications and offers 0.85 mm ball pitch for compact PCB routing. Architecturally, the 5M1270ZF256A5N uses a non-volatile flash-based configuration cell that retains bitstream without an external boot ROM, eliminating FPGA-style configuration time. Each logic element contains a 16-bit look-up table, a programmable register, and dedicated carry/arithmetic chains, while the interconnect uses a continuous FastTrack matrix that delivers predictable pin-to-pin timing of 6.2 ns. Typical applications include automotive body electronics and infotainment glue logic, industrial control and factory automation I/O expansion, consumer electronics display timing controllers, telecommunications line-card bus interfaces, and portable/handheld device power management sequencers. The wide operating temperature range makes it equally suitable for outdoor industrial enclosures. Designers should plan JTAG chain topology early, since the TMS, TDI, TDO, and TCK pins reside in Bank 1 and support every I/O standard except PCI and 1.2-V LVCMOS. For automotive designs, route the exposed-pad balls to a continuous ground plane to keep junction temperature below 125C at full toggle rate. This page synthesizes Intel/MAX V datasheet specifications, distributor pricing snapshots, AEC-Q100 qualified cross-references, and practical JTAG/PCB design notes that are not collected in any single manufacturer document.

RFQ تماس

5M1270ZF256C4N

5M1270ZF256C4N - 980 Macrocell MAX V CPLD, 256-FBGA | Intel

The Intel (formerly Altera) 5M1270ZF256C4N is a high-density MAX V family Complex Programmable Logic Device (CPLD) featuring 980 macrocells, 127 logic array blocks (LABs), and 211 user I/Os, housed in a 256-ball FineLine BGA (FBGA) package measuring 17 x 17 mm with 1.0 mm ball pitch. It operates from a single 1.8 V core supply (1.71 V to 1.89 V) and delivers up to 304 MHz internal performance with a worst-case pin-to-pin propagation delay (tPD) of 6.2 ns, making it well-suited for high-speed glue-logic, bus-interface bridging, and power-on control sequencing. A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines multiple PAL/GAL-like macrocell arrays on a single chip, providing instant-on, deterministic, single-cycle logic with predictable timing. CPLDs occupy the hierarchy between discrete logic gates (smallest), SPLDs (Simple PLDs), FPGAs (largest, most flexible, but volatile and configuration-dependent), and ASICs (highest density, NRE cost). MAX V CPLDs use a low-power, flash-based process that retains configuration without external boot memory. Key features include in-system programmability via JTAG, an internal voltage regulator requiring only a 1.8 V supply, 6.2 ns tPD enabling 304 MHz operation, and a commercial operating range of 0C to +70C (junction). The device integrates 980 macrocells across 127 LABs and exposes 211 general-purpose I/O pins, providing substantial logic capacity for I/O expansion, state-machine control, and parallel bus interfacing. The architecture is built on a non-volatile flash process with an internal 1.8 V regulator, eliminating the need for an external core-voltage rail. MultiVolt I/O banks support interfacing with 1.5 V, 1.8 V, 2.5 V, 3.3 V, and LVTTL/LVCMOS peripherals, while built-in JTAG (IEEE 1149.1) and ISP simplify board-level bring-up and field updates. Typical applications include I/O expansion and voltage-level translation between ASICs/SoCs and peripherals, power-sequence and reset-distribution controllers, bus-interface bridges (e.g., parallel-to-parallel width conversion), industrial control and factory-automation glue logic, and LED-display scan and refresh drivers. When designing with the 5M1270ZF256C4N, provide a clean 1.8 V rail with at least 10 uF of bulk decoupling near the supply balls and 0.1 uF ceramic caps adjacent to each VCC/VCCIO pin group. The FBGA-256 land pattern requires precise PCB fabrication (laser-drilled microvias recommended) and the exposed-pad balls must be soldered to a continuous ground plane for thermal and electrical performance. This page synthesizes distributor pricing, drop-in MAX V family alternatives, and practical design notes that complement the manufacturer datasheet for engineers evaluating the 5M1270ZF256C4N.

RFQ تماس

5M1270ZF256C5N

5M1270ZF256C5N - MAX V CPLD 980 Macro Cells | Intel / Altera

The Intel / Altera (formerly Altera) 5M1270ZF256C5N is a MAX V family Complex Programmable Logic Device (CPLD) featuring 980 macro cells, 1270 logic elements, and 212 user I/Os, housed in a 256-ball FineLine BGA (FBGA) package. It is built on a 0.30 µm process node and operates from a 1.8 V core supply with multi-voltage I/O support, providing 1.5 V, 1.8 V, 2.5 V, 3.3 V, or 5.0 V mixed-voltage interfacing on the same die. The device includes 8 Kbits of embedded Flash configuration memory, internal oscillator, and in-system programmability through JTAG or Altera ByteBlaster. A CPLD (Complex Programmable Logic Device) is a non-volatile, Flash-based programmable logic device that sits in the hierarchy between small SPLDs/gate arrays and large FPGAs. CPLDs are typically chosen for glue-logic, bus-interface bridging, power-up sequencing, and control-plane tasks where deterministic, single-clock-edge propagation delay (often under 10 ns pin-to-pin) and instant-on non-volatile configuration matter more than raw LUT density. The MAX V family specifically targets low-cost, low-power, high-I/O-density applications in the power-management, industrial, and consumer spaces. Key features include 212 maximum user I/Os, 8 Kbits of user Flash memory (UFM), 100% non-volatile Flash configuration with instant-on capability, an internal 25 MHz oscillator, support for 3.3/3.0/2.5 V PCI compliance, hot-socketing tolerance, and JTAG-compliant IEEE 1149.1 boundary-scan testing. The device supports MultiVolt I/O and hot-socketing, allowing I/O banks to operate at different voltages while the part is inserted into a live backplane. Architecturally, the 5M1270Z uses the classic MAX-family Logic Array Block (LAB) structure: 980 macro cells arranged in 1270 logic-element-equivalent blocks, fed by a global interconnect with predictable timing. The non-volatile Flash configuration eliminates the external boot PROM required by SRAM-based FPGAs and gives the device true instant-on behavior, which is essential for power-sequencing and safety-critical control logic. Compared with SRAM FPGAs, the MAX V CPLD also provides stronger EMI immunity and lower standby power. Typical applications include I/O expansion and bus bridging for microcontrollers, power-sequencer and supervisory logic in multi-rail systems, industrial control and motor-drive glue logic, consumer-electronics control boards, automotive body-electronics modules, and as a configuration/management companion to a larger FPGA. The 256-ball FBGA footprint is well suited for space-constrained designs requiring high I/O count. When designing with the 5M1270ZF256C5N, provision a stable 1.8 V VCCINT rail and tie unused I/O banks to known voltages (do not float). For multi-voltage designs, follow the MAX V hot-socketing and MultiVolt I/O guidelines to avoid back-powering through I/O pins. JTAG chain order matters in multi-device boards: place the CPLD appropriately in the scan chain to keep TDI/TDO paths short. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes that are not collated in the manufacturer datasheet, helping engineers shorten evaluation and procurement cycles.

RFQ تماس

5M1270ZF256I5N

5M1270ZF256I5N - MAX V CPLD 980 Macro Cells 201MHz | Intel

The Intel (formerly Altera) 5M1270ZF256I5N is a low-power, high-density MAX V family Complex Programmable Logic Device (CPLD) featuring 980 macro cells, 201.1 MHz maximum operating frequency, and 1.8 V core supply, housed in a 256-ball FineLine BGA (FBGA) package. It delivers up to 212 user I/O pins, non-volatile flash configuration memory, and instant-on capability that eliminates external boot memory. A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that belongs to the broader family of programmable logic devices (PLDs), which sit alongside FPGAs in the digital logic hierarchy. Within the taxonomy: CPLD -> PLD -> programmable logic -> digital IC -> semiconductor. MAX V CPLDs use a classic Look-Up Table (LUT) and macro-cell fabric with a deterministic routing architecture, providing predictable pin-to-pin timing of approximately 5-7 ns that makes them ideal for glue-logic, bus-interface bridging, and control-plane tasks rather than high-throughput data-path processing. Key features include 980 logic elements (LEs), 8 Kbits of user flash memory (UFM), 1.8 V core voltage with multi-voltage I/O support (1.5 V to 3.3 V), JTAG and in-system programmability, and industrial temperature range (-40C to +100C). The device is built on a 0.18 um CMOS process and consumes approximately 17 mW typical quiescent power, dramatically lower than legacy MAX II parts. The 5M1270ZF256I5N uses a non-volatile flash-based configuration cell that holds the bitstream inside the device. Designers typically enter logic via Quartus II Web Edition or the newer Quartus Prime Lite using VHDL, Verilog, or schematic entry, then synthesize to a JEDEC/STAPL/POF bitstream that loads via JTAG, Active Serial, or Active Parallel modes. Typical applications include I/O expansion and bus bridging in industrial control boards, power-sequencer state machines for telecom line cards, display-panel timing controllers for LCD/OLED modules, and address decoding glue-logic between microprocessors and memory. Designers frequently pair the 5M1270ZF256I5N with a Cyclone V SoC for boot-mode strap handling, with discrete logic ICs for I2C/SPI level shifting, and with Intel MAX 10 or Cyclone 10 LP FPGAs for downstream processing. When designing with this device, ensure that VCCINT (1.8 V) and VCCIO banks (1.5-3.3 V) are decoupled with 100 nF ceramic capacitors placed as close as possible to the BGA balls. Unused I/O pins should be configured as outputs driving ground via the Quartus pin-assignment editor to minimize in-rush current at power-up. Verify all JTAG chain lengths if multiple MAX V devices share TDI/TDO. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ تماس

5M1270ZF324A5N

5M1270ZF324A5N - MAX V 980-Macrocell CPLD 1.8V FBGA-324 | Altera

The Altera 5M1270ZF324A5N is a 980-macrocell Flash-based Complex Programmable Logic Device (CPLD) from the MAX V family, packaged in a 324-ball FineLine BGA (FBGA-324) at 19x19 mm with 1.0 mm ball pitch, drawing 2 mA core current at 1.8 V and supporting 271 user I/O. It delivers a 10 ns propagation delay and up to 201.1 MHz internal frequency, addressing glue-logic, I/O expansion, and power-sequencing tasks between processors and peripherals. A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device positioned between simple SPLDs and high-density FPGAs in the programmable logic hierarchy (SPLD < CPLD < FPGA). MAX V CPLDs use a flash-backed CMOS Look-Up Table (LUT) architecture with non-volatile configuration cells, providing instant-on behavior at power-up without an external boot PROM. Compared with FPGAs, MAX V parts trade logic density for predictable timing, lower power, and instant-on configurability, making them well-suited for control-plane, bus-interface, and power-management tasks. Key features include 980 macrocells (equivalent to 1280 LUT-equivalent elements), 271 user I/Os with multi-voltage I/O standards (1.5 V, 1.8 V, 2.5 V, 3.3 V LVCMOS/LVTTL), 8 Kbits of user flash memory, JTAG and ISP programming via IEEE 1149.1, and an industrial operating temperature range of -40 C to +85 C. The flash-based configuration eliminates the need for an external boot device and provides bitstream revision control. The 5M1270ZF324A5N architecture combines a Logic Array Block (LAB) fabric, I/O registers on every pin, and a low-power 1.8 V core with hot-socketing support. It also integrates JTAG BST and supports IEEE 1532 in-system programmability, simplifying field upgrades. With programmable pull-up resistors, slew-rate control, and 5 V-tolerant I/O (with proper external components), it interfaces cleanly with legacy and modern logic families. Typical applications include I/O expansion and bridging for microcontrollers and processors, bus-interface logic (I2C/SPI/UART/parallel), power-sequence controllers, LED display driving, industrial control, and automotive driver-assistance subsystems. The instant-on capability and industrial temperature rating make it suitable for factory automation and harsh-environment embedded designs. When designing with the 5M1270ZF324A5N, pay close attention to FBGA-324 PCB layout - the 1.0 mm pitch requires laser-drilled microvias or 4-layer stack-up with HDI technology. Decouple every VCC pin with 0.1 uF X7R ceramic capacitors placed within 100 mils of the ball. Use the Quartus II design software for synthesis, fitting, and timing analysis. This page synthesizes distributor pricing, same-family and cross-brand drop-in alternatives, and practical MAX V design notes that go beyond the manufacturer datasheet, supporting faster component selection and first-pass design success.

RFQ تماس

5M1270ZF324C4N

5M1270ZF324C4N - MAX V CPLD, 980 Macrocells, 324-FBGA | Intel

The Intel 5M1270ZF324C4N is a MAX V family Complex Programmable Logic Device (CPLD) delivering 980 macrocells and 271 user I/Os in a 324-ball FineLine BGA package. Built on a low-power 1.8 V core process, the device supports a maximum internal operating frequency of 304 MHz and a pin-to-pin propagation delay of 6.2 ns, making it suitable for high-speed glue-logic, bus-interface bridging, and power-up sequencing in industrial and consumer designs. A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines multiple PAL-like macrocells with a centralized interconnect fabric. It sits in the programmable logic hierarchy between simple PLDs (PAL/GAL) and higher-density FPGAs, offering instant-on operation, deterministic timing, and high fan-in. CPLDs are widely used as interface bridges, I/O expanders, and state-machine controllers where sub-10 ns deterministic latency and unlimited in-system reprogrammability are required without the configuration overhead of an FPGA. Key features include 980 macrocells organized across 127 logic array blocks (LABs), 4 user I/O banks for flexible voltage interfacing, JTAG-based IEEE 1149.1 boundary-scan support, and a built-in flash configuration memory that eliminates external boot PROM. The MAX V family also integrates a user flash memory (UFM) block, reducing system BOM by combining logic and parameter storage in a single chip. Architecturally, the device uses a non-volatile, look-up-table backed macrocell array with a continuous FastTrack interconnect that delivers constant pin-to-pin delay regardless of logic placement. This deterministic timing simplifies static timing closure and makes the 5M1270ZF324C4N attractive for safety-critical or hard-real-time control loops where FPGA compile-time variability is unacceptable. Typical applications include I/O expansion for microcontrollers without sufficient pin count, level-shifting between 1.8 V, 2.5 V, 3.3 V, and 5 V domains, power-sequencer implementation for multi-rail ASICs/SoCs, LED-display scanning and refresh, and legacy peripheral bus bridging (PCI, ISA, VME) in long-lifecycle industrial systems. The 0 C to +70 C commercial temperature range suits indoor, fan-cooled enclosures. When designing with this device, allocate a decoupling network of 0.1 uF and 10 uF capacitors adjacent to every supply pin, follow Intel's FBGA-324 PCB layout guidelines for microvia escape, and use the Quartus Prime programmer (JTAG or USB-Blaster) for in-system programming. The 324-ball FBGA package requires 1.0 mm pitch fan-out and is not hand-solderable, so assembly must use reflow profiles compliant with JEDEC J-STD-020. This page synthesizes distributor pricing, parametric alternatives, and practical PCB-layout notes not consolidated in the manufacturer datasheet alone.

RFQ تماس

زیردسته‌ها

محصولات (38,000+)

5CSXFC5D6F31C7N - Cyclone V SX SoC FPGA 85K LE | Intel

5CSXFC5D6F31C8N - Cyclone V SX SoC FPGA, 85K LE, Dual ARM Cortex-A9 | Intel

5CSXFC5D6F31I7N - Cyclone V SX SoC FPGA, 85K LE, Dual ARM Cortex-A9

5CSXFC6C6U23A7N - Cyclone V SX SoC FPGA, 110K LE, Dual ARM A9 | Intel

5CSXFC6C6U23C6N - Cyclone V SX SoC FPGA, 110K LE, 925MHz | Intel

5CSXFC6C6U23C7N - Cyclone V SX SoC FPGA, 110K LE, 672-UBGA | Intel

5CSXFC6C6U23C8N - Cyclone V SX SoC FPGA, 110K LE, ARM Cortex-A9 | Intel

5CSXFC6C6U23C8NES - Cyclone V SX SoC FPGA 110K LE | Intel

5CSXFC6C6U23I7LN - Cyclone V SX SoC FPGA 110K LE | Altera

5CSXFC6C6U23I7N - Cyclone V SX SoC FPGA, 110K LE, 672-UBGA | Intel

5CSXFC6C6U23I7NTS - Cyclone V SX SoC FPGA, 110K LE, 925MHz | Intel

5CSXFC6D6F31A7N - Cyclone V SX SoC FPGA, 110K LE, 896-FBGA | Intel

5CSXFC6D6F31C6N - Cyclone V SX SoC FPGA 110K LE | Intel

5CSXFC6D6F31C7N - Cyclone V SX SoC FPGA, 110K LE, 896-FBGA | Intel

5CSXFC6D6F31C8N - Cyclone V SX SoC FPGA, 110K LE, Dual ARM Cortex-A9 | Intel

5CSXFC6D6F31I7 - 110K Logic Elements, 800 MHz Cyclone V SX | Altera

5CSXFC6D6F31I7N - Cyclone V SX SoC FPGA, 110K LE | Intel

5L35023B-105NLGI - Programmable Clock Generator | Renesas

5M1270ZF256A5N - MAX V CPLD, 980 Macrocells, 256-FBGA | Intel

5M1270ZF256C4N - 980 Macrocell MAX V CPLD, 256-FBGA | Intel

5M1270ZF256C5N - MAX V CPLD 980 Macro Cells | Intel / Altera

5M1270ZF256I5N - MAX V CPLD 980 Macro Cells 201MHz | Intel

5M1270ZF324A5N - MAX V 980-Macrocell CPLD 1.8V FBGA-324 | Altera

5M1270ZF324C4N - MAX V CPLD, 980 Macrocells, 324-FBGA | Intel