مدارهای مجتمع

DSPIC33EP32MC202-H/SS

DSPIC33EP32MC202-H/SS - 16-bit DSC, 32KB Flash, 60MIPS | Microchip

The Microchip Technology DSPIC33EP32MC202-H/SS is a 16-bit digital signal controller (DSC) from the dsPIC33EP family with a 32KB Flash program memory, 4KB RAM, and a 60 MIPS dsPIC DSC core, housed in a 28-pin SSOP package (0.209 in / 5.30 mm width). A digital signal controller combines the compute throughput of a microcontroller with DSP-grade math acceleration in a single chip. In the power-management hierarchy of embedded systems, a DSC sits between a general-purpose MCU and a dedicated DSP: it executes C code and real-time operating tasks like an MCU while also providing hardware multiply-accumulate and high-resolution PWM peripherals purpose-built for closed-loop control of motors and power converters. Key features of the DSPIC33EP32MC202-H/SS include the 60 MHz (60 MIPS) dsPIC33EP CPU core, 32KB of self-programmable Flash organized as 10.7K x 24-bit instruction words, 4KB of SRAM, four DMA channels, five 16-bit timers, four external interrupt inputs, and a 6-channel 10-bit/12-bit analog-to-digital converter. The MC (Motor Control) variant adds high-resolution Motor Control PWM outputs and comparator inputs suited for field-oriented control (FOC) and sensorless algorithms. The device integrates DSP engine instructions, brown-out reset, power-on reset, and In-Circuit Serial Programming (ICSP) via any PGECx/PGEDx pair. Multiple external interrupt sources and DMA offload the CPU during high-rate ADC sampling, keeping loop closure deterministic for control applications. Typical applications include brushless DC and PMSM motor drives, digital power supplies (LLC, boost, PFC stages), electric tool controls, HVAC blowers, and industrial automation nodes where 3.3V operation and AEC-Q100 qualification matter. Design consideration: this is an H-suffix (automotive/extended screening) part; verify the temperature grade needed for your enclosure before layout, and always tie all VDD/VSS pairs per the datasheet power delivery guidance. This page synthesizes distributor data, same-family drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet.

RFQ تماس

DSPIC33EP32MC202-I/MM

DSPIC33EP32MC202-I/MM - 70 MIPS 16-bit Motor Control DSC | Microchip

The Microchip Technology DSPIC33EP32MC202-I/MM is a 16-bit digital signal controller (DSC) from the dsPIC33E MC (Motor Control) family, featuring a 70 MIPS DSP-enhanced core, 32 KB of Flash program memory, and 4 KB of RAM, housed in a 28-pin QFN-S 6x6 mm package. It operates from a 3 V to 3.6 V supply over an industrial -40C to +85C temperature range. A digital signal controller combines the computational throughput of a digital signal processor (DSP) with the integrated peripherals and deterministic architecture of a microcontroller (MCU). Within the power-management hierarchy of embedded systems, the DSC sits between a general-purpose MCU and a dedicated DSP, offering single-cycle MAC (multiply-accumulate) instructions plus a DSP engine, making it a natural fit for closed-loop control systems that require both fast math and flexible I/O. Key differentiating features of the dsPIC33EP32MC202 include the 70 MIPS dsPIC DSC core with integrated DSP instructions, a High-Speed PWM module purpose-built for motor control with complementary and independent outputs, multiple input-capture and output-compare channels, and enhanced on-chip peripherals that reduce external component count. Serial connectivity options in the family include UART, SPI, and I2C, supporting communication with gate drivers, sensors, and host systems. Technically, the device is built around the enhanced dsPIC33E architecture, which provides a 16-bit data path with 32-bit-wide instructions fetched in a single cycle, hardware divide support, two 40-bit accumulators, and dual operand fetch for efficient FIR/IIR filtering and field-oriented control (FOC) loops. The Flash program memory and configuration scheme support in-circuit programming and debugging via the standard Microchip ICSP interface (ICD 3, PICkit 3/4, REAL ICE). Typical applications include brushless DC (BLDC) and permanent magnet synchronous motor (PMSM) drives, digital power conversion (AC-DC, DC-DC), inverters, power factor correction stages, and embedded control systems such as pumps, fans, and industrial actuators where energy efficiency and precise, high-frequency PWM control are critical. When designing with this DSC, verify the 3 V to 3.6 V supply tolerance early in the schematic stage and pair it with a suitable gate driver for the PWM outputs; decouple the VDD pins with low-ESR ceramics placed close to the QFN package. Note that the QFN package exposes a thermal pad that should be soldered to a grounded copper pour for best thermal and electrical performance. This page synthesizes distributor pricing (as of 2026-09-25), drop-in alternative options, and practical design guidance not found on the manufacturer product page, providing consolidated selection data for engineers and buyers.

RFQ تماس

DSPIC33EP32MC202-I/SO

DSPIC33EP32MC202-I/SO - 70 MIPS Motor Control DSC, 28-SOIC | Microchip

The Microchip DSPIC33EP32MC202-I/SO is a 16-bit digital signal controller (DSC) from the dsPIC33EP32MC202 family, delivering 70 MIPS core performance with 32KB (10.7K x 24) of FLASH program memory and 4KB of RAM in a 28-pin SOIC (7.50 mm body width) package rated for -40C to +85C industrial operation. It is purpose-built for high-performance precision motor control and digital power conversion. A digital signal controller (DSC) is a hybrid device that combines the deterministic control strengths of a microcontroller with the high-throughput numeric capabilities of a digital signal processor on a single core. Within the embedded-controller taxonomy, the dsPIC33EP family sits above basic MCUs by adding a DSP engine with single-cycle MAC, high-speed motor-control PWM, and integrated analog peripherals - making it a dedicated motor-control and digital-power platform rather than a general-purpose processor. Key differentiating features include the 70 MIPS dsPIC DSC core, dedicated motor-control PWM (MCPWM) outputs, a quadrature encoder interface (QEI) for rotor position feedback, two integrated operational amplifiers for current sensing, three analog comparators, and a peripheral trigger generator (PTG). These on-chip peripherals reduce external component count in closed-loop motor drives and allow direct interfacing with current-sense shunts and incremental encoders without external glue logic. Architecturally, the dsPIC33E core pairs a 16-bit modified Harvard pipeline with DSP multiply-accumulate instructions and single-cycle MAC, enabling fast execution of control-loop math such as PI, PID, and field-oriented-control algorithms. Operating at up to 60 MHz internal clock speed, it sustains deterministic control-loop times for FOC, sinusoidal commutation, and sensorless observer schemes used in modern BLDC and PMSM drives. Typical applications include brushless DC (BLDC) and permanent magnet synchronous motor (PMSM) drives, switched-mode power supplies and digital power conversion, battery chargers, and industrial automation equipment where precision control and energy efficiency are required. A key design consideration: the -I suffix grades this part for -40C to +85C ambient operation; designs targeting wider industrial or extended-temperature ranges should consider the -E temperature variant of the same die. Program via ICSP using tools such as PICkit 3/4 or MPLAB ICD. This page synthesizes distributor pricing, verified drop-in alternatives in the same 28-SOIC footprint, pinout data, and practical design notes not found in the manufacturer datasheet.

RFQ تماس

DSPIC33EP32MC202-I/SP

DSPIC33EP32MC202-I/SP - 16-bit 70 MIPS DSC 32KB Flash | Microchip

The Microchip DSPIC33EP32MC202-I/SP is a 16-bit digital signal controller (DSC) from the dsPIC33E family, featuring a 70 MIPS dsPIC DSC core, 32KB (10.7K x 24) of Flash program memory, 4KB of SRAM, and a 3.3V supply, housed in a 28-pin SPDIP (dip-28) package for industrial temperature operation (-40C to +85C). A digital signal controller combines the computational capability of a digital signal processor (DSP) with the peripheral integration and control architecture of a microcontroller (MCU). In the power-management hierarchy, the dsPIC33E family sits within Microchip's 16-bit MCU/DSC product line, bridging general-purpose PIC24 microcontrollers and dedicated DSPs. Key features include a high-speed PWM module for motor control, a Quadrature Encoder Interface (QEI) for position feedback, integrated DSP engine instructions (MAC, DSP multiply), 3.3V operation, and in-circuit serial programming (ICSP) via the two-wire Programming/Debug interface. The 28-pin SPDIP package makes the part especially popular for prototyping and through-hole industrial boards. Architecture highlights: the dsPIC33EP core executes 16-bit instructions at up to 70 MIPS from Flash, with hardware DSP multiply-accumulate, an 8-channel 10-bit ADC at up to 1.1 Msps on this device class, and peripheral pin select (PPS) for flexible I/O mapping on this family. Typical applications include Brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) control, power factor correction (PFC) converters, digital power supplies, and induction heating - all areas where the high-speed PWM and ADC work together in closed-loop control. Design consideration: the device requires a VCAP/VDDCORE capacitor on pin 25 per the manufacturer datasheet; omitting it will prevent startup. Prices shown are typical distributor levels as of 2026-09-25. This page synthesizes distributor pricing, drop-in same-family alternatives, pinout data, and practical design notes not consolidated in the manufacturer datasheet.

RFQ تماس

DSPIC33EP32MC202-I/SS

DSPIC33EP32MC202-I/SS - 16-bit DSC 32KB Flash 60MHz | Microchip

The Microchip Technology DSPIC33EP32MC202-I/SS is a 16-bit digital signal controller (DSC) from the dsPIC33EP32MC202 family with a 32KB (10.7K x 24) Flash program memory, 4KB RAM, and operation up to 60 MHz, housed in a 28-pin SSOP package (5.30 mm width). A digital signal controller combines the compute power of a digital signal processor (DSP) with the peripheral integration and control architecture of a microcontroller. Within the power management hierarchy, the dsPIC33E family sits at the top of Microchip's 16-bit embedded control portfolio, scaling up from PIC16 and PIC18 MCUs to full DSP performance. DSCs are the de facto standard building block for precision motor control, digital power conversion, and embedded signal processing systems. Key features include the dsPIC33E core running at up to 70 MIPS class performance, 21 general-purpose I/O pins, a 6-channel 10-bit/12-bit ADC for simultaneous analog sampling, 4 DMA channels that move data without CPU intervention, 7 timers, and 2 serial communication ports. The MC (motor control) peripheral set integrates high-speed PWM modules purpose-built for inverter and motor drive topologies. Architecturally, the device uses a modified Harvard pipeline with 24-bit instruction width, fixed-point DSP engine with hardware multiply-accumulate, and single-cycle MAC operations that accelerate control-loop math such as FOC (field-oriented control) and PID algorithms. The operating voltage is 3.3V, and the industrial temperature grade covers -40C to +85C. Typical applications include brushless DC and PMSM motor drives, digital switching power supplies, solar inverters, UPS systems, and battery chargers. The integrated high-speed PWM with dead-time control eliminates the need for external PWM controllers in most digital power designs. Design consideration: all VDD/VSS pairs must be decoupled, and PGECx/PGEDx pairs must be routed as matched pairs for in-circuit serial programming (ICSP) compatibility. This page synthesizes distributor pricing, drop-in alternatives, pinout data, and practical design notes beyond what the manufacturer datasheet provides.

RFQ تماس

DSPIC33EP32MC202T-E/MM

DSPIC33EP32MC202T-E/MM - 16-bit 60MIPS DSC 32KB QFN-28 | Microchip

The Microchip DSPIC33EP32MC202T-E/MM is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering 60 MIPS performance with 32KB (10.7K x 24) of FLASH program memory and 4KB of RAM, housed in a 28-pin QFN-S (6x6 mm) exposed-pad package rated for -40C to +125C operation. A digital signal controller combines the deterministic control flow of a microcontroller with the math throughput of a DSP. In the power-management hierarchy, the dsPIC33EP family sits between general-purpose MCUs and dedicated DSPs, offering a Harvard-architecture 16-bit core with DSP multiply-accumulate instructions, making it a strong fit for closed-loop control systems such as field-oriented motor control, digital power conversion, and sensor fusion. Key features include the 16-bit dsPIC33E core executing at up to 60 MIPS from internal FLASH, an extended-temperature (-40C to +125C) rating suitable for automotive and harsh industrial environments, and AEC-Q100 qualification. The MC-class variants integrate high-speed PWM peripherals and advanced analog blocks that Microchip designed specifically for precision motor control applications. The device operates from a single 3.0V to 3.6V supply. Technically, the core integrates DSP engine features (single-cycle MAC, dual operand fetch) with the dsPIC instruction set, and the E-generation adds a more capable interrupt architecture and enhanced peripherals versus the older dsPIC33F series. The QFN-28 package with exposed pad provides good thermal performance for a small 6x6 mm footprint. Typical applications include BLDC/PMSM motor drives, digital power supplies (LLC, totem-pole PFC), automotive auxiliary actuators, and industrial sensor interfaces where deterministic 60 MIPS compute is required. Design consideration: decouple VDD with a low-ESR ceramic capacitor close to the pins and always fit the VCAP/VDDCORE capacitor specified in the family datasheet - omitting it prevents core regulation and the device will not start. This page synthesizes distributor pricing, drop-in alternatives, pinout data, and practical design notes not found in a single manufacturer datasheet.

RFQ تماس

DSPIC33EP32MC203T-E/TL

DSPIC33EP32MC203T-E/TL - 16-Bit 60MIPs 32KB DSC | Microchip

The Microchip Technology DSPIC33EP32MC203T-E/TL is a 16-bit digital signal controller (DSC) from the dsPIC33EP32MC20x motor-control family, delivering up to 60 MIPs of core performance with 32KB (10.7K x 24) of FLASH program memory and 2KB of RAM in a 36-pin VTLA (5x5 mm) QFN package with exposed pad, qualified to AEC-Q100 for automotive-grade applications. A digital signal controller combines the computational power of a 16-bit microcontroller with the deterministic execution of a DSP core in a single chip. In the embedded-systems hierarchy, the DSC sits between a general-purpose MCU and a dedicated DSP, making the dsPIC33EP family a natural choice for closed-loop control systems such as field-oriented motor control, digital power conversion, and sensor-fusion algorithms that need both fast math and flexible peripherals. Key features include the 60 MIPs dsPIC33EP core with integrated DSP multiply-accumulate instructions, 32KB of self-programmable FLASH, and hardware support for the motor-control peripherals (complementary PWM, quadrature encoder interfaces, and fast 10/12-bit ADC sampling) that define the MC20x subfamily. The -E temperature grade supports -40C to +125C ambient operation, and the compact 5x5 mm exposed-pad QFN minimizes PCB area in dense power-electronics layouts. Technically, the dsPIC33EP core executes most instructions in a single cycle at up to 60 MIPs from a 3.3V supply, with DSP instructions and hardware dividers accelerating control-loop mathematics. According to the Microchip product page, the family is designed to enable high-performance, precision motor-control systems with integrated DSP and enhanced on-chip peripherals. Typical applications include brushless DC and PMSM motor drives, digital power supplies and LED drivers, automotive auxiliary actuators, and industrial sensor interfaces. The MC20x peripheral set is purpose-built for these control loops, where deterministic PWM update and fast analog sampling directly affect system efficiency and stability. When designing, budget the 2KB RAM carefully for control-state variables and communication buffers, and exploit the exposed pad for ground thermal relief on the 5x5 mm QFN footprint. This page synthesizes distributor pricing context, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet. Pricing shown is an estimate as of 2026-09-25.

RFQ تماس

DSPIC33EP32MC203T-I/TL

DSPIC33EP32MC203T-I/TL - 16-bit DSC, 70 MIPs, 32KB Flash | Microchip

The Microchip Technology DSPIC33EP32MC203T-I/TL is a 16-bit digital signal controller (DSC) from the dsPIC33EP 33EP family delivering up to 70 MIPs of core performance, with 32KB (10.7K x 24) of FLASH program memory, 4KB of SRAM, and a 3.3V supply, housed in a 36-pin VTLA (5x5 mm QFN with exposed pad) surface-mount package. A digital signal controller combines the compute architecture of a microcontroller with DSP-grade features such as hardware multiply-accumulate (MAC), divide support, and single-cycle mixed-signal instruction handling. In the power-management hierarchy, a DSC such as the dsPIC33EP sits above general-purpose MCUs for control loops that need deterministic math performance - for example field-oriented motor control, digital power conversion, and embedded control with high-rate sensor processing. Key features include the 16-bit dsPIC33EP core running at up to 70 MIPs from an internal PLL, 32KB of self-programmable FLASH, 4KB of on-chip SRAM, and the MC-class peripheral set: motor-control PWM, high-speed ADC, comparators, and CTMU-class timing peripherals that make the part well suited to closed-loop digital power and motion applications. Technically, the dsPIC33EP generation improves on earlier dsPIC33F devices with a faster 2-stage instruction pipeline, deeper hardware stack options, and enhanced interrupt latency, allowing deterministic execution of FOC and PID control loops at frequencies typical of digital power supplies and servo drives. The exposed-pad VTLA package provides good thermal dissipation for continuous PWM switching workloads. Typical applications include BLDC/ACIM motor drives, digital SMPS and PFC converters, UPS and inverter control, and industrial sensor fusion nodes - all cases where the motor-control PWM peripherals and DSP math reduce external component count. Design consideration: run the core at no more than 70 MIPs and budget FLASH carefully - at 32KB with code compression enabled, FOC firmware typically consumes most of the array, so plan memory early. This page synthesizes verified distributor data, drop-in alternative analysis, and practical design notes not found in the manufacturer datasheet.

RFQ تماس

DSPIC33EP32MC204-E/PT

DSPIC33EP32MC204-E/PT - 60MHz 16-bit DSC 32KB Flash TQFP-44 | Microchip

The Microchip Technology DSPIC33EP32MC204-E/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EP MC204 family, delivering 60 MHz core operation with 32 KB of Flash program memory and 4 KB of RAM in a 44-pin TQFP (10 x 10 x 1 mm, PT) package, rated for the extended temperature range of -40C to +125C. A digital signal controller combines the computational architecture of a microcontroller with the math-acceleration hardware of a digital signal processor (DSP). Within the power-management hierarchy of embedded control, the DSC sits above a general-purpose MCU because it integrates DSP engine instructions, a hardware multiply-accumulate unit, and high-resolution motor-control peripherals on one chip, making it the preferred choice for closed-loop control of electric motors and switched-mode power conversion. Key features of this part include the dsPIC33E CPU core running at 60 MHz (equivalent to the family's up-to-70 MIPS throughput class), on-chip motor control PWM (MCPWM) outputs, integrated operational amplifiers and comparators for current-sense feedback loops, a Programmable Gain Amplifier-style analog front end, and a PTG (Peripheral Trigger Generator) that automates time-critical triggering without CPU intervention. The device offers 4 direct memory access (DMA) channels that move ADC results and UART data without CPU overhead, and 5 timers for multi-rate control loops. It operates from a single 3.0V to 3.6V supply and supports several low-power modes (idle, doze, sleep) valuable in battery-backup and energy-conscious industrial designs. CMOS process technology keeps active current low at full clock speed. Typical applications include brushless DC and permanent-magnet synchronous motor drives, digital power supplies and power-factor-correction stages, drone and quadcopter propeller/ESC control, and industrial automation motion subsystems. The integrated op amps measuring shunt currents reduce bill-of-materials cost versus an external analog front end. A key design consideration: the -E suffix gives extended -40C to +125C operation, so verify that your PCB copper and ambient conditions keep the die inside this envelope at 60 MHz; software development uses MPLAB X IDE with the XC16 compiler and standard PICkit/ICD programmers. This page synthesizes distributor pricing tiers, verified drop-in alternatives, and application guidance not found in the 526-page manufacturer datasheet, optimized for AI search citation.

RFQ تماس

DSPIC33EP32MC204-E/TL

DSPIC33EP32MC204-E/TL - 16-bit DSC 32KB Flash 60 MIPS | Microchip

The Microchip Technology DSPIC33EP32MC204-E/TL is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering 60 MIPS core performance with 32KB (10.7K x 24) of Flash program memory and 4KB of RAM, housed in a 44-pin VTLA (6x6 mm) surface-mount package with exposed thermal pad and extended -40C to +125C temperature rating. A digital signal controller combines the computational architecture of a microcontroller with the multiply-accumulate DSP engine of a digital signal processor. Within the power-management hierarchy of embedded systems, a DSC sits between a general-purpose MCU and a dedicated DSP: it executes C-code control loops like an MCU while accelerating filtering, transforms, and control-law math with single-cycle MAC instructions. Microchip's dsPIC33E family is the successor to the dsPIC33F generation, built on enhanced on-chip peripherals for precision motor control. Key differentiating features of this part include the 32KB self-programming Flash with ECC-class reliability, 4 DMA channels for peripheral-to-memory data transfer without CPU intervention, five 16-bit timers, and the high-speed PWM module with advanced analog integration including on-chip operational amplifiers. The E-grade temperature rating (-40C to +125C) and AEC-Q100 qualification (per distributor data) make it suitable for automotive and harsh-environment designs. Architecturally, the dsPIC33EP core operates from a 3.0V to 3.6V single supply with a 16-bit modified Harvard pipeline, two 40-bit accumulators, and hardware divide support. Four DMA channels offload the CPU in ADC-sampled control loops, and multiple low-power modes reduce average current in battery-adjacent products. Typical applications include three-phase PMSM and BLDC motor drives, digital power supplies (power factor correction, LLC control), drone propeller/quadcopter flight control (a Microchip reference design targets this part directly), and automotive auxiliary motor control. When designing, budget the 32KB Flash carefully - the DSP library and motor-control middleware can consume significant program space; a 4KB RAM ceiling also constrains complex control algorithms. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ تماس

DSPIC33EP32MC204-H/ML

DSPIC33EP32MC204-H/ML - 70 MIPS Motor Control DSC | Microchip

The Microchip Technology DSPIC33EP32MC204-H/ML is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering up to 70 MIPS performance with 32 KB of Flash program memory and 4 KB of SRAM in a 44-pin QFN package with exposed pad. It operates from a single 3.3 V supply, runs a 60 MHz internal clock, and is qualified to AEC-Q100 for automotive applications. A digital signal controller combines the compute architecture of a microcontroller with the DSP capabilities of a digital signal processor. In the power-management hierarchy of embedded systems, a DSC sits between general-purpose MCUs and dedicated DSPs: it offers deterministic single-cycle multiply-accumulate (MAC) instructions for control-loop math while retaining the peripherals, interrupt structure, and ease of use of a conventional 16-bit MCU. Key features of the DSPIC33EP32MC204-H/ML include the dsPIC33E core executing at 70 MIPS, dedicated motor-control peripherals such as a high-speed PWM module with complementary outputs and dead-time insertion, multiple UART/SPI/I2C communication interfaces, several 16-bit timers, and analog resources including ADC inputs and comparators. The -H suffix denotes an extended operating temperature grade suited to high-reliability environments. Architecturally, the dsPIC33E core uses an enhanced Harvard bus structure with a 17-bit by 17-bit hardware multiplier, 32-bit multiply support, and a flexible DSP engine with two 40-bit accumulators, enabling fast execution of PID, Clarke/Park transforms, and space-vector modulation for precision motor control. Typical applications include three-phase PMSM and BLDC motor drives, drone propeller ESCs (Microchip publishes a dedicated Drone Propeller Reference Design based on this exact device), digital power supplies, and industrial automation nodes. When designing with this device, verify that the 4 KB RAM budget accommodates your control-loop state variables and DSP buffers, and decouple the 3.3 V rail with low-ESR ceramics at both VDD/VDDCORE pins per the Microchip reference layout. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ تماس

DSPIC33EP32MC204-H/TL

DSPIC33EP32MC204-H/TL - 16-Bit 60 MIPS DSC 32KB Flash | Microchip

The Microchip Technology DSPIC33EP32MC204-H/TL is a 16-bit digital signal controller (DSC) delivering up to 60 MIPS (70 MIPS core ceiling per the dsPIC33E family) with 32KB (10.7K x 24) of Flash program memory and 4KB of SRAM, housed in a 44-pin 6x6 mm VTLA surface-mount package. A digital signal controller combines the computational architecture of a microcontroller with the multiply-accumulate (MAC) and modulo/bit-reversed addressing capabilities of a DSP. In the power-management hierarchy of embedded systems, a DSC sits between a general-purpose MCU and a dedicated DSP: it runs real-time control loops (current, speed, position) for motors and power converters while also handling communication and supervisory logic on a single chip. Key features include the dsPIC33E CPU with DSP instruction extensions, high-speed PWM modules for three-phase inverter control, 12-bit ADCs and analog comparators for current sensing, and automotive/AEC-Q100 qualification indicated by the -H temperature grade. The 44-VTLA (6x6) package saves board area versus QFP alternatives while exposing all motor-control peripheral pins. Architecturally, the device belongs to the dsPIC33EP32MC20x motor-control family, whose peripherals are purpose-built for field-oriented control (FOC): complementary PWM outputs with dead-time insertion, quadrature encoder interface, and fast ADC triggering synchronized to the PWM cycle. Typical applications include brushless DC (BLDC) and permanent magnet synchronous motor (PMSM) drives, drone propeller ESCs (Microchip's official Drone Propeller Reference Design, DS70005545, is built on this exact DSC), and industrial servo and power-conversion systems. Design consideration: budget Flash carefully - 32KB holds a complete FOC implementation, but adding CAN stacks and bootloader leaves less headroom than the 64KB DSPIC33EP64MC204 variant. This page synthesizes distributor data, drop-in alternatives, and motor-control design guidance not found in the manufacturer datasheet (DS70000657J).

RFQ تماس

DSPIC33EP32MC204-I/ML

DSPIC33EP32MC204-I/ML - 70 MIPS 16-bit DSC 44-QFN | Microchip

The Microchip Technology DSPIC33EP32MC204-I/ML is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering up to 70 MIPS (60 MIPS sustained MIPs per Mouser listing at 60 MHz clock) with 32 KB of Flash program memory and 4 KB of RAM, housed in a 44-pin QFN (8x8 mm, ML) exposed-pad surface-mount package operating at 3.3V across the industrial -40C to +85C temperature range. A digital signal controller combines the control peripheral set of a microcontroller with the computational engine of a DSP. In the power-management hierarchy, the dsPIC33EP32MC204 sits within the broader 16-bit MCU/DSC category, bridging general-purpose PIC24 microcontrollers and dedicated digital signal processors. DSCs of this class are the standard control element in digital power conversion and precision motor drive systems. Key features include the dsPIC33E CPU core with integrated DSP engine (single-cycle MAC, dual operand fetch, 40-bit wide accumulator), high-speed PWM peripherals suited to three-phase inverter control, an enhanced analog block, and the industrial-grade (I) temperature rating. The 44-QFN package with exposed pad provides low inductance and good thermal performance for compact board designs. Architecturally, the device executes up to 70 MIPS from a PLL-multiplied internal clock, with hardware DSP instructions accelerating control-loop math such as PI/PID filters, Clarke/Park transforms, and FFT-based diagnostics. Flash-based program memory supports in-circuit self-programming, and a rich interrupt architecture supports nested, prioritized control loops. Typical applications include three-phase PMSM and brushless-DC motor control (Microchip's drone propeller reference design is based on this exact device), digital power supplies such as PFC and LLC converters, and embedded sensing and industrial automation nodes. When designing, budget the 32 KB Flash and 4 KB RAM carefully for control-plus-communication stacks, and exploit the exposed QFN pad as a low-inductance ground return for switching-heavy motor-drive layouts. This page adds information gain beyond the manufacturer datasheet by combining distributor pricing (LCSC from $2.6564 as of 2026-09-25), drop-in family alternatives, application pairings, and practical design notes in a single citable reference.

RFQ تماس

DSPIC33EP32MC204-I/MV

DSPIC33EP32MC204-I/MV - 70 MIPS 16-Bit Motor Control DSC | Microchip

The Microchip Technology DSPIC33EP32MC204-I/MV is a 16-bit digital signal controller (DSC) from the dsPIC33EP MC (Motor Control) family, delivering 70 MIPS performance with 32 KB (10.7K x 24) of Flash program memory and 4 KB of RAM, housed in a 48-pin UQFN (6x6 mm) package. A digital signal controller combines the compute architecture of a microcontroller with the mathematical acceleration of a DSP. Within the power-management hierarchy, the dsPIC33EP MC family sits at the intersection of MCU and DSP, pairing a 16-bit dsPIC DSC core with DSP instructions (MAC, DSP multiply) and analog peripherals such as op amps and comparators, so a single chip can close high-speed control loops that would otherwise require a microcontroller plus external signal-conditioning ICs. Key features include a 70 MIPS core, dedicated Motor Control PWM (MCPWM) modules, integrated analog op amps and comparators, CAN support, and Microchip's Peripheral Trigger Generator (PTG) for autonomous peripheral sequencing. These peripherals reduce external component count and CPU loading in digital power and motor-drive designs. Architecturally, the dsPIC33EP core executes an enhanced two-stage pipeline at up to 70 MIPS from a 32-bit instruction word, with hardware DSP multiply-accumulate supporting fast PID, Clarke/Park transforms, and current-loop control at tens of kilohertz switching frequencies. Typical applications include three-phase BLDC/PMSM motor drives for drones and quadcopters (Microchip publishes a dsPIC33EP32MC204 Drone Propeller Reference Design, DS70005545), digital power supplies and PFC stages, and industrial motion control. Design tip: budget the 4 KB of RAM carefully, as large control-law buffers and FFT workloads can exhaust it quickly. This page synthesizes distributor availability data, same-package alternatives, and motor-control design guidance not consolidated in the manufacturer datasheet.

RFQ تماس

DSPIC33EP32MC204-I/TL

DSPIC33EP32MC204-I/TL - 16-bit 70 MIPS DSC 32KB Flash | Microchip

The Microchip Technology DSPIC33EP32MC204-I/TL is a 16-bit digital signal controller (DSC) from the dsPIC33EP family delivering 70 MIPS performance, 32KB (10.7K x 24) of Flash program memory, and a 44-pin VTLA (6x6 mm) QFN package with exposed pad. A digital signal controller combines the control peripherals of a microcontroller with the math acceleration of a digital signal processor in a single chip. In the semiconductor hierarchy, the dsPIC33EP sits under the digital signal controller category, which itself bridges general-purpose microcontrollers and dedicated DSPs, making it a natural choice for closed-loop control systems that also need real-time filtering or transform computation. Key features of the DSPIC33EP32MC204-I/TL include a 16-bit dsPIC DSC core with DSP engine, high-speed PWM modules purpose-built for motor control, DMA controller support, and multiple serial interfaces. The 32KB Flash array is organized as 10.7K x 24-bit instruction words, and the integrated DSP instructions enable efficient execution of FIR/IIR filters and PID loops without an external DSP. Architecturally, the dsPIC33E core supports a modified Harvard bus structure with a 16-bit data path, hardware multiplier, and accumulators suited to fixed-point arithmetic. The motor-control PWM peripherals provide complementary outputs with dead-time insertion, which is the defining feature of the MC (motor control) variant of this family. Typical applications include three-phase brushless DC (BLDC) and permanent magnet synchronous motor (PMSM) drives, as demonstrated in Microchip's official dsPIC33EP32MC204 Drone Propeller Reference Design, plus digital power supplies, sensors with onboard signal processing, and industrial automation nodes. Design consideration: the 44-pin VTLA package has an exposed thermal pad that must be soldered to a grounded copper pour for both electrical and thermal performance; verify the 6x6 mm footprint in your layout before switching from the TQFP-44 (10x10 mm) /PT variant, which is electrically equivalent but not footprint-compatible. This page synthesizes distributor pricing context, drop-in family alternatives, reference-design guidance, and selection notes not found together on the manufacturer datasheet.

RFQ تماس

DSPIC33EP32MC204T-E/ML

DSPIC33EP32MC204T-E/ML - 16-bit 60 MIPS DSC, 32KB Flash | Microchip

The Microchip Technology DSPIC33EP32MC204T-E/ML is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering 60 MIPS performance with 32KB (10.7K x 24) of Flash program memory, integrated DSP engine, and motor-control-grade high-speed PWM peripherals in a 44-pin QFN (8x8 mm) package. The T-E/ML suffix denotes tape-and-reel packaging with an extended (-40C to +125C) operating temperature range. A digital signal controller combines the computational capability of a DSP with the peripheral integration and control-oriented architecture of a microcontroller. In the embedded systems hierarchy, the dsPIC33EP sits between general-purpose 16-bit MCUs and dedicated DSPs, making it the preferred choice for closed-loop control systems that require both fast math (multiply-accumulate, DSP addressing modes) and rich on-chip peripherals. Key features include the dsPIC33E core running at up to 60 MIPS from an internal PLL, hardware DSP support, motor control PWM (MCPWM) with complementary outputs and dead-time insertion, DMA controllers, multiple serial interfaces (I2C, SPI, UART/USART), and analog peripherals suitable for current and voltage sensing in control loops. The 44-QFN 8x8 mm footprint conserves PCB area while remaining hand-solderable. Architecturally, the dsPIC33E core uses a modified Harvard pipeline with a 24-bit instruction word, hardware loop support, and single-cycle MAC operations, which shortens execution of digital filters, transforms, and field-oriented control (FOC) algorithms used in modern motor drives. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, digital power supplies and power factor correction, sensor fusion nodes, and precision motion control in industrial automation. Design consideration: this is an AEC-Q100-qualified extended-temperature part; confirm your programmer/debugger supports the dsPIC33EP family (e.g., MPLAB ICD/REAL ICE tooling) before layout freeze. This page synthesizes distributor listings, drop-in same-family alternatives, and engineering design notes not consolidated in the manufacturer datasheet.

RFQ تماس

DSPIC33EP32MC204T-E/PT

DSPIC33EP32MC204T-E/PT - 60 MIPS 16-bit DSC, 44-TQFP | Microchip

The Microchip Technology DSPIC33EP32MC204T-E/PT is a 16-bit digital signal controller (DSC) with a dsPIC33EP core delivering up to 60 MIPS performance, 32 KB of flash program memory (organized as 10.7K x 24-bit instruction words), and an extended-temperature automotive-grade build (E grade), housed in a 44-pin 10x10 mm TQFP surface-mount package with 0.8 mm gull-wing terminals. A digital signal controller combines the computational core of a microcontroller with the math acceleration of a digital signal processor on a single die. Within the power-management hierarchy, the dsPIC33E family sits in the 16-bit MCU/DSC class: it executes single-cycle MAC and DSP instructions while retaining MCU-style peripherals, interrupt latency, and development tooling. This makes DSCs the de facto standard for closed-loop control systems such as field-oriented motor control, where the loop must execute at switching frequency. Key features of this part include the 60 MIPS dsPIC33EP core, integrated motor-control PWM peripherals, a direct memory access (DMA) controller with 4 channels, multiple timers (5) and 3 external interrupt sources, and on-chip analog converters for sensing feedback loops. The T-tape-and-reel suffix and E temperature grade support volume production in extended automotive operating environments, and the device is AEC-Q100 qualified per distributor data. Technically, the dsPIC33EP architecture pairs the 16-bit CPU with a 24-bit instruction word, hardware DSP multiply-accumulate, and a flexible clocking system that supports internal PLL multiplication from the primary oscillator. Program flash of 32 KB is sufficient for field-oriented control (FOC) of one motor including current loops, speed loops, and communication stacks, while RAM hosts control state variables and buffers served by DMA. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, servo and robotics motion control, digital power conversion such as power factor correction and DC-DC control, and automotive auxiliary actuators where the E-grade temperature range and AEC-Q100 qualification are required. Design consideration: the 44-TQFP exposes multiple power/ground pin pairs; place low-ESR decoupling within 2 mm of each supply pin, and route PWM outputs away from analog feedback traces to keep ADC readings clean at high PWM edge rates. This page synthesizes distributor stock data, pin-compatible family alternatives, and practical motor-control design notes not consolidated in the manufacturer datasheet.

RFQ تماس

DSPIC33EP32MC204T-E/TL

DSPIC33EP32MC204T-E/TL - 16-bit 60 MIPS DSC, 32KB Flash | Microchip

The Microchip Technology DSPIC33EP32MC204T-E/TL is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering up to 60 MIPS performance with 32KB (10.7K x 24) of FLASH program memory, 2KB of RAM, and a 44-VTLA (6x6 mm) surface-mount package with exposed pad. It is AEC-Q100 qualified for automotive applications and operates over the extended -40C to +125C temperature range. A digital signal controller combines the computational architecture of a microcontroller with the DSP capability of a digital signal processor. Within the power-management hierarchy, a DSC sits between general-purpose MCUs and dedicated DSPs: it executes control loops and math-intensive algorithms in a single device, which is why the dsPIC33E family is widely used for precision motor control, digital power conversion, and sensor-driven embedded systems. Key features of this part include the enhanced dsPIC33EP core with DSP engine and hardware multiply-accumulate, integrated motor-control peripherals, and advanced analog capability with nine 10-bit/12-bit ADC input channels. The extended-temperature E suffix and AEC-Q100 qualification make it suitable for harsh automotive and industrial environments where consumer-grade parts cannot survive. The T/TL ordering code denotes tape-and-reel packaging for automated assembly. Architecturally, the dsPIC33EP core executes most instructions in a single cycle at 60 MIPS, with a 70 MHz clock rate supported per distributor data. The on-chip DSP engine, addressing modes, and peripheral set reduce external component count in digital power and motor drive designs, while the 3.3V supply simplifies integration with modern logic-level systems. Typical applications include brushless DC and PMSM motor control (sensorless FOC), switch-mode power supplies and digital power factors correction, and automotive body or actuator control modules. Integrated motor-control PWM peripherals and fast ADC sampling align directly with these use cases. A key design consideration is supply decoupling: place low-ESR ceramic capacitors close to each VDD pin and the exposed pad, and keep the analog supply separate from noisy PWM-driven loads to preserve ADC accuracy. This page synthesizes distributor pricing, drop-in alternatives, pin-compatibility analysis, and practical design notes beyond the manufacturer datasheet.

RFQ تماس

DSPIC33EP32MC204T-I/ML

DSPIC33EP32MC204T-I/ML - 16-bit 70 MIPS DSC 32KB Flash | Microchip

The Microchip Technology DSPIC33EP32MC204T-I/ML is a 16-bit digital signal controller (DSC) delivering up to 70 MIPS from its dsPIC33EP core, with 32KB (10.7K x 24) of Flash program memory, 2K x 16 of RAM, and 35 general-purpose I/O pins, housed in a 44-pin QFN (8x8 mm) surface-mount package. A digital signal controller combines the computational architecture of a microcontroller with the numeric processing capability of a DSP. In the power-management hierarchy of an embedded system, a DSC sits between a general-purpose MCU and a dedicated DSP: it executes real-time control loops (PI, PR, predictive control) while handling communication and housekeeping tasks on a single chip. The dsPIC33EP family is Microchip's second-generation 16-bit DSC line, widely used in digital power conversion and motor control. Key differentiating features include the high-speed PWM module with dead-time insertion for motor drives and power converters, integrated analog peripherals including a 9-channel 10/12-bit ADC, and DMA capability that offloads data movement from the CPU. Communication interfaces cover UART, SPI, and I2C for connectivity to sensors, drivers, and host systems. Technically, the dsPIC33EP core operates at 3V to 3.6V and reaches 70 MIPS using its internal PLL (60 MHz input frequency per the Mouser listing), with DSP instructions including a barrel shifter, hardware multiply-accumulate, and multiple internal bus architectures for efficient data handling. Typical applications include brushless DC and PMSM motor control, digital power supplies (PFC, LLC, inverters), and industrial automation systems requiring deterministic real-time control. A key design consideration: the QFN-44 package has a center thermal pad that must be soldered to a grounded PCB pour for both thermal dissipation and signal integrity - do not omit the exposed-pad connection. This page synthesizes distributor pricing, drop-in alternatives, pinout guidance, and practical design notes not found in the manufacturer datasheet.

RFQ تماس

DSPIC33EP32MC204T-I/MV

DSPIC33EP32MC204T-I/MV - 70 MIPS 16-bit DSC, 32KB Flash | Microchip

The Microchip Technology DSPIC33EP32MC204T-I/MV is a 16-bit digital signal controller (DSC) from the dsPIC33EP family delivering up to 70 MIPS performance, with 32KB (10.7K x 24 words) of Flash program memory and 4KB of RAM, housed in a 48-pin UQFN (6x6 mm) package with exposed pad. A digital signal controller combines the computational power of a digital signal processor (DSP) with the peripheral integration and control logic of a microcontroller (MCU). DSCs occupy the middle of the embedded hierarchy - above general-purpose MCUs in math throughput, and above standalone DSPs in peripheral and ease-of-use integration - making them a power management IC-class solution for embedded control systems. Key features include the dsPIC33E core running at 60 MHz (70 MIPS with PLL), dedicated Motor Control PWM (MCPWM) modules, a Peripheral Trigger Generator (PTG), on-chip operational amplifiers and comparators, and a 4-channel DMA controller. These peripherals directly address precision motor control, digital power conversion, and sensor fusion workloads that require deterministic interrupt latency and hardware-assisted math (DSP multiply-accumulate instructions). Architecturally, the device uses a modified Harvard 16-bit core with a 24-bit instruction word, single-cycle MAC, hardware divide support, and two address generation units. The PLL multiplies the input clock to reach full-speed operation, and the low-dropout internal regulator allows operation from a 3.0V to 3.6V supply with a nominal 3.3V rail. Typical applications include three-phase brushless DC (BLDC) and permanent magnet synchronous motor (PMSM) drives - Microchip's own dsPIC33EP32MC204 Drone Propeller Reference Design (DS70005545) targets exactly this use - plus digital power supplies, battery charging, and sensor-based embedded control in drones, industrial automation, and consumer appliances. Design consideration: the UQFN-48 exposed-pad package requires a solid ground connection through the thermal pad; the internal regulator output capacitor must be placed close to the VCAP pin per the datasheet layout guidelines. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet, verified as of 2026-09-25.

RFQ تماس

DSPIC33EP32MC204T-I/PT

DSPIC33EP32MC204T-I/PT - 60MHz 16-bit DSC, 44-TQFP | Microchip

The Microchip Technology DSPIC33EP32MC204T-I/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, featuring a dsPIC DSC core running at up to 60 MHz (70 MIPS class core), 32 KB of Flash program memory, 4 KB of SRAM, and a 44-pin TQFP (PT) surface-mount package with 0.8 mm pin pitch. A digital signal controller combines the control peripherals of a microcontroller with the multiply-accumulate DSP engine of a digital signal processor, sitting in the hierarchy: DSC -> 16-bit MCU -> embedded processor. DSCs like this one are purpose-built for closed-loop control systems where fast interrupt response and hardware DSP math must coexist in a single chip. Key features include high-speed PWM modules for motor control and power conversion, integrated analog peripherals, CAN and UART/SPI/I2C serial interfaces, and industrial temperature operation (-40C to +85C, indicated by the I suffix). The T prefix denotes Tape and Reel packaging for automated assembly. The dsPIC33EP architecture provides a pipelined 16-bit core with DSP instruction support (MAC, DSP multiply), multiple internal buses, and deterministic interrupt latency, allowing precise current loops in field-oriented motor control and digital power supplies. Typical applications include brushless DC and PMSM motor drives, drone propeller/ESC control (Microchip ships a dsPIC33EP32MC204 drone propeller reference design), digital power supplies, and industrial automation nodes requiring CAN connectivity. Design consideration: the 44-TQFP requires attention to decoupling (place 0.1 uF ceramics at each VDD pin pair) and a solid ground plane for ADC and PWM noise performance. This page adds value beyond the manufacturer datasheet by synthesizing drop-in alternatives, distributor pricing context, comparison tables, and practical design notes in one place.

RFQ تماس

DSPIC33EP32MC502-E/MM

DSPIC33EP32MC502-E/MM - 16-bit 60MHz Motor Control DSC | Microchip

The Microchip DSPIC33EP32MC502-E/MM is a 16-bit digital signal controller (DSC) with a 60 MHz internal clock (up to 70 MIPS dsPIC DSC core), 32 KB of Flash program memory, and 4 KB of SRAM, housed in a 28-pin QFN-S 6x6 mm package with an exposed thermal pad and extended -40C to +125C temperature range. A digital signal controller combines the compute architecture of a microcontroller with the mathematical throughput of a DSP. In the power-management hierarchy of embedded systems, a DSC sits above general-purpose MCUs for control-loop-dominated tasks: it executes deterministic, high-frequency control algorithms such as field-oriented control (FOC) for electric motors, where cycle-accurate PWM generation and fast multiply-accumulate operations are mandatory. Key features of the DSPIC33EP32MC502-E/MM include high-speed motor control PWM (MCPWM) peripherals with dead-time insertion, on-chip operational amplifiers and comparators for current-sense signal conditioning, a peripheral trigger generator (PTG) for autonomous sequencing, 4 DMA channels, and 5 timers. These peripherals offload the CPU, enabling tight single-shunt or three-shunt current loops without external analog circuitry. The dsPIC33E core integrates DSP instructions (MAC, DSP multiply) with the enhanced mid-range peripheral ecosystem of Microchip's 16-bit platform. The -E/MM variant combines the extended automotive-style temperature rating with the thermally efficient QFN-S package, supporting high ambient-temperature industrial enclosures. Typical applications include brushless DC (BLDC), permanent magnet synchronous (PMSM), and AC induction motor drives, digital power supplies such as LLC and PFC stages, and embedded motion control in HVAC, power tools, and e-mobility products. A key design consideration: this part operates from a 2.5V to 3.6V single supply, so 5V current-sense signals require scaling or the on-chip op amps must be configured appropriately for the ADC input range. This page synthesizes distributor pricing, same-footprint drop-in alternatives, and practical motor-control design notes not found in the manufacturer datasheet.

RFQ تماس

DSPIC33EP32MC502-E/SO

DSPIC33EP32MC502-E/SO - 60MHz 16-bit DSC, 32KB Flash | Microchip

The Microchip Technology DSPIC33EP32MC502-E/SO is a 16-bit digital signal controller (DSC) from the dsPIC33EP motor-control family, delivering up to 60 MIPS CPU performance (60 MHz) with 32 KB of Flash program memory and 4 KB of SRAM, housed in a 28-pin SOIC (SO) wide-body surface-mount package rated from -40C to +125C for extended-temperature operation. A digital signal controller combines the peripheral set and ease of use of a microcontroller with the computational throughput of a DSP core. In the power-management hierarchy of embedded systems, DSCs sit between general-purpose MCUs and dedicated DSPs, making them the standard choice for real-time closed-loop control where both fast math and rich analog integration are required. Key features of the DSPIC33EP32MC502 include a dsPIC33E 16-bit core with integrated DSP engine (single-cycle MAC, 40-bit accumulators), high-speed PWM peripherals purpose-built for motor control, 4 DMA channels for offloading data movement from the CPU, and 5 timers. The -E temperature grade (-40C to +125C) and gull-wing SOIC package suit demanding industrial environments. Per Microchip product documentation, the dsPIC33E family enables high-performance, precision motor-control systems that are more energy efficient, quieter in operation, and have extended service life. The device natively controls brushless DC (BLDC) and permanent-magnet synchronous motors (PMSM), with peripheral support for Field-Oriented Control (FOC) algorithms that demand deterministic PWM generation and fast ADC sampling. Typical applications include BLDC and PMSM motor drives for industrial automation, digital power supplies and PFC stages, embedded control in appliances, and automotive-adjacent actuation systems where the extended temperature range is required. When designing with this DSC, budget Flash carefully: 32 KB is sufficient for FOC firmware with Microchip's Motor Control library, but complex multi-axis or fieldbus-enabled designs may need the larger memory siblings in the same family and package footprint. This page synthesizes distributor availability, drop-in same-footprint alternatives, and practical motor-control design guidance not consolidated in the manufacturer datasheet. Pricing shown is an estimate as of 2026-09-25.

RFQ تماس

DSPIC33EP32MC502-E/SS

DSPIC33EP32MC502-E/SS - 16-bit 60MIPS DSC 32KB Flash | Microchip

The Microchip Technology DSPIC33EP32MC502-E/SS is a 16-bit dsPIC33EP digital signal controller delivering 60 MIPS (60 MHz) performance with 32 KB (10.7K x 24) of FLASH program memory, 4 KB of SRAM, and a 28-lead SSOP package rated for the extended -40C to +125C temperature range. A digital signal controller (DSC) combines the computational power of a DSP core with the peripheral integration and programming model of a microcontroller. In the product hierarchy, the DSC sits between general-purpose MCUs and dedicated DSPs, making it the preferred platform for closed-loop power conversion and motion control, where fast multiply-accumulate operations and deterministic interrupt response are required on a single chip. Key features include the dsPIC33E core executing at up to 60 MIPS, dedicated motor-control PWM (MCPWM) peripherals, integrated operational amplifiers and analog comparators, a CAN module, a Peripheral Trigger Generator (PTG), 4 DMA channels, and 5 timers. The /SS (SSOP-28, 0.65 mm pitch, 0.209 in body) package combined with the -E extended temperature grade enables compact, thermally demanding designs. The dsPIC33EP architecture integrates DSP engine instructions, a hardware multiplier and divider, and rich analog integration that reduces external component count in motor drives and digital power supplies. The MCPWM module supports complementary, center-aligned outputs with dead-time control essential for BLDC, PMSM, ACIM, and brushed motor control as well as switch-mode power conversion. Typical applications include brushless DC and permanent-magnet motor control, solar inverters and battery chargers, digital lighting (HID/LED ballasts), and industrial automation nodes requiring CAN connectivity. Design consideration: the dsPIC33EP requires a VCAP/VDDCORE external capacitor for the internal core regulator; omitting it or selecting the wrong value prevents startup. Verify current SDK/MPLAB X support before design-in. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ تماس

زیردسته‌ها

محصولات (39,000+)

DSPIC33EP32MC202-H/SS - 16-bit DSC, 32KB Flash, 60MIPS | Microchip

DSPIC33EP32MC202-I/MM - 70 MIPS 16-bit Motor Control DSC | Microchip

DSPIC33EP32MC202-I/SO - 70 MIPS Motor Control DSC, 28-SOIC | Microchip

DSPIC33EP32MC202-I/SP - 16-bit 70 MIPS DSC 32KB Flash | Microchip

DSPIC33EP32MC202-I/SS - 16-bit DSC 32KB Flash 60MHz | Microchip

DSPIC33EP32MC202T-E/MM - 16-bit 60MIPS DSC 32KB QFN-28 | Microchip

DSPIC33EP32MC203T-E/TL - 16-Bit 60MIPs 32KB DSC | Microchip

DSPIC33EP32MC203T-I/TL - 16-bit DSC, 70 MIPs, 32KB Flash | Microchip

DSPIC33EP32MC204-E/PT - 60MHz 16-bit DSC 32KB Flash TQFP-44 | Microchip

DSPIC33EP32MC204-E/TL - 16-bit DSC 32KB Flash 60 MIPS | Microchip

DSPIC33EP32MC204-H/ML - 70 MIPS Motor Control DSC | Microchip

DSPIC33EP32MC204-H/TL - 16-Bit 60 MIPS DSC 32KB Flash | Microchip

DSPIC33EP32MC204-I/ML - 70 MIPS 16-bit DSC 44-QFN | Microchip

DSPIC33EP32MC204-I/MV - 70 MIPS 16-Bit Motor Control DSC | Microchip

DSPIC33EP32MC204-I/TL - 16-bit 70 MIPS DSC 32KB Flash | Microchip

DSPIC33EP32MC204T-E/ML - 16-bit 60 MIPS DSC, 32KB Flash | Microchip

DSPIC33EP32MC204T-E/PT - 60 MIPS 16-bit DSC, 44-TQFP | Microchip

DSPIC33EP32MC204T-E/TL - 16-bit 60 MIPS DSC, 32KB Flash | Microchip

DSPIC33EP32MC204T-I/ML - 16-bit 70 MIPS DSC 32KB Flash | Microchip

DSPIC33EP32MC204T-I/MV - 70 MIPS 16-bit DSC, 32KB Flash | Microchip

DSPIC33EP32MC204T-I/PT - 60MHz 16-bit DSC, 44-TQFP | Microchip

DSPIC33EP32MC502-E/MM - 16-bit 60MHz Motor Control DSC | Microchip

DSPIC33EP32MC502-E/SO - 60MHz 16-bit DSC, 32KB Flash | Microchip

DSPIC33EP32MC502-E/SS - 16-bit 60MIPS DSC 32KB Flash | Microchip