Power Integrations et Ideal Power démontrent un disjoncteur statique 800 VDC autoalimenté pour baies IA

Power Integrations et Ideal Power combinent des CI InnoMux-2 1700 V avec des commutateurs bidirectionnels B-TRAN dans un disjoncteur statique autoalimenté pour baies de data centers IA 800 VDC.

Publié Mis à jour 5 min de lecture ✓ Compatible IA Partager

TL;DR — trois phrases

  • Power Integrations (POWI) and Ideal Power (IPWR) announced a collaboration on a solid-state circuit breaker (SSCB) for 800 VDC AI data center racks. (S1)
  • The architecture combines Power Integrations' 1700 V InnoMux-2 power conversion ICs with Ideal Power's B-TRAN bidirectional semiconductor switches, and a working prototype has been demonstrated. (S1)
  • The InnoMux-2 IC uses 1700 V PowiGaN technology to derive isolated gate-drive, control, sensing, and auxiliary power directly from the 800 V bus, eliminating the external auxiliary supply typically required by electronic breakers. (S1)

Tiré de key_takeaways (champ réel, 3 entrées max.). Faits et analyse sont étiquetés séparément.

Power Integrations et Ideal Power démontrent un disjoncteur statique 800 VDC autoalimenté pour baies IAEditorial cover for a component sourcing brief. Power motif; headline "Power Integrations et Ideal Power démontrent un disjoncteur statique 800 VDC autoaliment…". Reported key numbers: 800 VDC; 1700 V. 1 cited source. Static cover (no animation).Power Integrations et Ideal Power démontrentun disjoncteur statique 800 VDC autoaliment…REPORTED KEY NUMBERS800 VDC1700 V1 sourceXAIPART
Cover image generated from data already shown on this page: the category motif, the headline, and reported key numbers. No decorative illustration; no third-party image.

Vous arrivez depuis une réponse d'IA — voici l'original vérifiable

Un résumé généré par IA peut avoir omis le fondement de ses affirmations. La prévision d'origine, les références concernées et chaque citation figurent sur cette page, chacune traçable à sa source.

Prévision XAIPART

Cette brève comporte une prévision falsifiable.

Accéder à la prévision complète et à sa règle de falsification ›
Références concernées

Aucune correspondance dans le catalogue pour cette information — rien n'est affiché plutôt que de déduire une correspondance.

Voir comment cela est décidé ›
Vous cherchez une référence ? Envoyez une demande → RFQ

Reported by Power Electronics News Feed on 2026-10-12. Summarized and analyzed by XAIPART Editorial.

What happened

Power Integrations (NASDAQ: POWI) and Ideal Power Inc. (NASDAQ: IPWR) announced a collaboration to deliver a solid-state circuit breaker (SSCB) aimed at 800 VDC AI data center racks.S1

The joint architecture pairs Power Integrations' 1700 V InnoMux-2 power conversion ICs with Ideal Power's B-TRAN bidirectional semiconductor power switches, and the two companies have demonstrated a working prototype while working on a reference design.S1

The InnoMux-2 IC is intended to convert 800 V into isolated power for gate-drive, control electronics, sensing, and auxiliary circuitry on the breaker itself, so the SSCB can be self-powered directly from the 800 V bus without an external auxiliary supply. The IC uses 1700 V PowiGaN technology and provides multiple independently regulated outputs in place of one isolated PSU followed by multiple DC-DC converters. The B-TRAN switch then uses that local intelligence to interrupt the 800 V power path to the AI compute load.S1

The companies frame the move as a response to protection limits at higher rack power: mechanical breakers are described as too slow to protect sensitive rack equipment, while prior electronic breakers are described as adding losses that hurt system efficiency, and they must also be powered from the 800 V bus. Chris Jacobs, senior vice president of marketing and product strategy at Power Integrations, and David Somo, CEO of Ideal Power, are quoted in the release supporting that framing.S1

Key numbers
MetricReported value
Bus voltage targeted800 VDC
IC breakdown voltage1700 V
Switch typeB-TRAN bidirectional
Prototype statusWorking prototype demonstrated
Reference design statusIn development, not disclosed
Production part numbersNot disclosed
Target MSRP / pricingNot disclosed
Lead timeNot disclosed

Background timeline

  1. - Power Integrations and Ideal Power announce the SSCB collaboration and demonstrate a working prototype combining 1700 V InnoMux-2 ICs with B-TRAN switches for 800 VDC AI racks. [S1]

XAIPART take

Technical impact

XAIPART analysis The 1700 V InnoMux-2 gives meaningful headroom over an 800 V bus, which matters because wide-bandgap designs derate for surge, ringing, and de-saturated turn-off energy in SSCBs. Deriving the gate-drive, sensing, and auxiliary rails directly from the 800 V bus removes a redundant isolated PSU from the bill of materials, but it also concentrates the breaker on the highest-voltage node in the rack, so creepage, clearance, and arc-fault behavior need to be re-qualified rather than assumed in from lower-voltage breaker platforms. The B-TRAN bidirectional switch is the differentiator on the power path: a symmetrical device can interrupt fault current in either direction without the diode-bridge losses of conventional SSCB topologies, and the release explicitly contrasts this against the high conduction loss that has historically disqualified semiconductor breakers.

Market impact

XAIPART analysis For procurement, the headline risk is that mechanical 800 V breakers mature faster than semiconductor alternatives, but the upside is removing one full isolated PSU per protected 800 V feed, which compounds at hyperscaler scale. Both companies are publicly traded (POWI, IPWR), so lead times and pricing for InnoMux-2 and B-TRAN are likely to follow hyperscaler ramp announcements from NVIDIA, AMD, and the 800 V rack reference design consortia; XAIPART does not yet have a lead-time comparison, and the source did not disclose volume pricing.

Action

XAIPART analysis Design-in engineers targeting 800 VDC AI racks should request the upcoming reference design directly from Power Integrations and Ideal Power to validate the self-powered architecture against their own fault-interrupt time and isolation budgets, since the source did not disclose interruption time, peak fault current rating, or UL/IEC 489B / 60947-2 qualification status. Buyers should track both POWI and IPWR for distributor stock on InnoMux-2 1700 V variants and B-TRAN modules as the reference design approaches release, and they should not yet commit to a sole-source roadmap for the switch device given Ideal Power's still-narrow commercial footprint. A safety delta to flag internally: the breaker must be evaluated for failure-mode behavior when the 800 V bus itself collapses, because the self-powered architecture described depends on that bus being live for its own control electronics.

XAIPART Forecast

XAIPART analysis XAIPART expects that, if a published reference design from Power Integrations and Ideal Power is not demonstrated publicly interrupting an 800 VDC fault within 9 months from the 2026-10-12 announcement (i.e., by 2027-07-12), this collaboration is unlikely to set the de facto topology for 800 VDC SSCB in AI racks and incumbent mechanical or SiC-based breakers will retain design wins; conversely, if a reference design with a published fault-interruption time under 100 microseconds and a published 800 V efficiency figure above 99 percent lands by 2027-07-12, the InnoMux-2 plus B-TRAN pairing is XAIPART's expected reference topology for self-powered 800 VDC solid-state breakers through 2028.

Facts are as reported by the cited source. The design-in, sourcing and forward-looking statements above are XAIPART's analysis, not the source's claims. Uncertainty: fault-interruption time, peak fault current rating, efficiency percentage, qualification status, pricing, and lead time were not disclosed by the source; the collaboration is single-sourced from a joint press release and has not been independently verified.

Corrections: none at publication. This brief will be updated with a timestamp if the source corrects its report.

Alternatives et cycle de vie

Alternatives référencées — périmètre du catalogue, pas un classement de marché
RéférenceRelationCycle de vieFondement
— Aucune alternative référencée DONNÉES REQUISES — Nécessite match_type avant que toute mention de prédécesseur ne puisse apparaître

Les mentions « prédécesseur » et « alternative » proviennent uniquement d'un type de correspondance enregistré, d'un statut de cycle de vie ou du texte source. Lorsqu'aucune correspondance n'est enregistrée, aucune mention n'est affichée. Nos propres annonces ne constituent pas une référence de marché.

Références concernées

Aucune correspondance dans le catalogue. Cette information ne correspond à aucune référence actuellement listée sur XAIPART. Nous ne déduisons pas de correspondances et n'affichons pas de liste fictive.

Pression sur les coûts par dimension

Source: FRED · Generated · reference output z and composite are algorithm outputs, not a fetch snapshot

Cost pressure by dimension — composite stateDiverging bars for three dimensions around a zero midpoint. Input Cost has no reading; Supply Demand z -1.4711, notable; Fx Energy z 0.4541, neutral. Composite index -7.6, band neutral.0Input costno readingSupply/demandz −1.4711 · notable46 dFX & energyz +0.4541 · neutral6 dcomposite −7.6 · neutral−100 · −40 · −15 · 0 · +15 · +40 · +100
Underlying values — copyable for verification.
DimensionFRED series IDUnitLagAs of
Input costPCOPPUSDM, PALUMUSDM, PNICKUSDMUSD/mt96 d
Supply/demandPCU334413334413, IPG3344Sindex(1982=100) / index(2017=100)46 d
FX & energyDEXCHUS, DCOILBRENTEU, DHHNGSPrate / USD/bbl / USD/MMBtu6 d

No free authoritative interface for: gold · silver · rare earth · polysilicon · lithium carbonate · market share — listed rather than approximated.

Comment ce contenu a été produit

Traçabilité du processus — récupération, contrôle de la source, modèle et contrôle
Piste d'audit de cette brève
Source fetched Power Electronics News Feed · finnhub.io · 3,394 chars
Source sanity (S1) ok — passed before any model call (no s1_ block recorded)
Model / prompt MiniMax-M3 · prompt Blog Agent - News Summary (v2.8-final) · 7,064 tokens · 41.1s · run completed
Gate verdict pass · 6/6 applicable checks passed · spec v2.9 · C10 ratio 0.029984 · C10 rounds 0
Time contract 1 <time datetime> values in this brief — 0 violations (+08:00 or date-only)

Chaque ligne ci-dessus est produite par le pipeline, et non rédigée à la main.

Score éditorial

Résultat du contrôle déterministe — PHP pur, aucun modèle impliqué dans le verdict
Détail du score de contrôle 6 contrôles applicables, 6réussies : 100 %. No hold items or mandatory failures. Gate spec: v2.9 (S0 + S1 + C1–C20) · Source affinity (C20): 0.686. Contrôles applicables réussis 6 / 6 = 100% · verdict : pass No hold items or mandatory failures Gate spec: v2.9 (S0 + S1 + C1–C20) · Source affinity (C20): 0.686 Le contrôle décide de la publication. Le score d'audit indépendant est purement consultatif.

Couverture liée

Vous avez trouvé une erreur ? Signalez-nous le problème — les corrections sont publiées avec le texte d'origine et consignées. Nous ne modifions jamais silencieusement un article.

Commentaires

Soyez le premier à commenter.

Sources

  1. Power Electronics News Feed — https://finnhub.io/api/news?id=70e531a015ce92e961af1a60d5446d8030cf4b389fb8dccba0397e06e2d7d927 · rss · consulté le

Les faits sont marqués S1/S2 et renvoient à la source liée. Les passages étiquetés analyse relèvent du raisonnement propre à XAIPART, tenu séparé des faits rapportés. Les liens sources sont consultés plutôt que nofollow — l'attribution est intentionnelle.