Circuits intégrés

Z86C9116PSG

Z86C9116PSG - 16MHz 8-Bit ROMless MCU | Zilog

Zilog Z86C9116PSG is an 8-bit Z8 ROMless microcontroller operating at 16 MHz with a 4.5 V to 5.5 V supply range, 236 bytes of RAM, 32 I/O ports, and a 40-pin PDIP package. It belongs to the Z86C91 product family and requires an external program-memory device because no internal ROM is provided. An 8-bit ROMless microcontroller is a compact embedded-control processor designed for systems that require deterministic I/O handling rather than application storage inside the MCU. In the product hierarchy, the Z86C9116PSG is a microcontroller, an embedded processor, and a semiconductor integrated circuit. Its ROMless architecture separates program memory from the controller, allowing designers to select external storage according to firmware size and interface requirements. The headline features include a 16 MHz operating clock, an 8-bit data bus, 236 bytes of on-chip RAM, and 32 I/O ports. The 4.5 V to 5.5 V supply range supports conventional 5 V industrial embedded systems. Because the MCU is ROMless, an external program-memory device is required, while the 236 bytes of internal RAM provide limited working memory for variables, stack operations, and control-state management. The Z86C9116PSG uses the Z8 architecture and is positioned as a compact, low-cost controller for embedded products requiring parallel digital I/O. Its 40-pin PDIP package provides a comparatively large number of external connections compared with smaller surface-mount MCUs, making it practical for prototyping, through-hole industrial assemblies, and applications that need direct access to peripheral pins. Typical uses include appliance controllers, industrial sequencers, keyboard or panel interfaces, lighting-control modules, instrumentation, and small embedded automation systems. The 32 I/O ports are particularly useful when a design must connect multiple switches, indicators, sensors, or actuators without relying on additional interface expanders. When designing around this device, engineers must account for the absence of internal program memory and provide a suitable external memory implementation. The available verified data does not specify the external-memory interface, exact pin assignments, peripheral mix, or detailed timing characteristics, so those items should be confirmed in the manufacturer datasheet before schematic capture. This product page consolidates distributor availability, verified pricing, device hierarchy, package information, and same-brand replacement analysis. It also distinguishes directly documented drop-in candidates from alternatives that cannot be verified as pin-to-pin compatible, helping engineers avoid replacing an MCU solely because the clock speed and package description look similar.

Devis Contact

Z86C9320FSC

Z86C9320FSC 8-Bit 20MHz ROMless MCU 44-LQFP | Zilog

The Zilog Z86C9320FSC is an 8-bit Z8 ROMless microcontroller operating at up to 20 MHz in a 44-LQFP package measuring 10 x 10 mm. It provides 236 KB of RAM, 24 I/O pins, three 8-bit timers, and a UART communication interface. Z86C9320FSC is intended for embedded control designs where external program memory is required and a compact, high-pin-count surface-mount implementation is preferred. An 8-bit microcontroller is a programmable semiconductor device designed to execute embedded control logic using an 8-bit data path. The Z86C9320FSC belongs to the Z8 family of Zilog microcontrollers and is a ROMless device, meaning the application program is stored in external memory rather than embedded program ROM. This architecture separates the controller from the program memory, allowing the memory device to be selected according to application capacity, interface, and cost requirements. The principal verified specifications are a maximum operating speed of 20 MHz, 236 KB of RAM, 24 I/O, three 8-bit timers, one UART interface, and a 44-LQFP package. The package provides 44 terminals for power, clock, reset, communications, timers, interrupts, general-purpose I/O, and external-memory connections. The reported speed options include 20 MHz, 25 MHz, and 33 MHz, while the distributor listing identifies the Z86C9320FSC specifically as a 20 MHz ROMless device. The ROMless architecture is useful for applications that need larger or field-updatable firmware than a fixed-program microcontroller normally provides. External program-memory selection must account for bus timing, address capacity, signal integrity, and the controller's documented external-memory interface. The Z86C9320FSC should therefore be evaluated as a system component rather than only as a standalone MCU. Typical application areas include industrial control panels, serial-control equipment, building automation modules, data-acquisition controllers, motor-control interfaces, and embedded communication products. A UART provides a practical path for host configuration, sensor networking, or supervisory control, while the three timers support periodic timing, input capture, or basic output-control functions depending on the complete peripheral configuration. A critical design consideration is firmware availability: because this device is ROMless, the PCB must include an appropriate external memory solution and correct bus support components. Engineers should verify the complete Zilog documentation for electrical limits, pin assignments, memory-interface timing, clock requirements, and programming procedure before releasing a production layout. This page consolidates verified distributor specifications, package information, sourcing details, and engineering-oriented application guidance. It also distinguishes documented facts from parameters that require confirmation from the manufacturer datasheet, helping designers compare the Z86C9320FSC efficiently without assuming unavailable electrical details.

Devis Contact

Z86C9333FSC

Z86C9333FSC - 33MHz 8-Bit ROMless MCU | Zilog

Zilog Z86C9333FSC is a 33 MHz, 8-bit Z8 ROMless microcontroller with 236 x 8 bytes of RAM, 24 I/O lines, three 8-bit timers, UART/USART support, and EBI/EMI connectivity in a 44-pin LQFP package measuring 10 x 10 mm. Its 33 MHz operating speed provides higher throughput than conventional low-speed 8-bit controllers while retaining the simple Z8 architecture and external program-memory interface. An 8-bit microcontroller is a compact processor designed to execute embedded control logic from program memory and maintain operating state in RAM. The Z86C9333 belongs to the broader embedded-controller hierarchy: MCU -> microcontroller -> embedded processor -> semiconductor. A ROMless architecture means the device contains no internal program ROM, so firmware must be supplied through an external memory interface. This architecture is useful when programs, firmware revisions, or memory sizes must remain flexible. The verified feature set includes ROMless operation at 33 MHz, 236 bytes of RAM, 24 I/O lines, three 8-bit timers, UART communication, and EBI/EMI interfaces. The 44-LQFP surface-mount package exposes substantially more signal pins than small dual-inline packages, supporting parallel external memory and additional peripheral connectivity while remaining compatible with automated PCB assembly. The Z86C9333 architecture is intended for embedded control rather than high-compute workloads. Its external program-memory interface allows the stored firmware size to be established outside the MCU, while its three timers support periodic counting, timing, and event generation. UART/USART communication enables connection to host systems, sensors, or other controllers, and EBI/EMI provides an external bus-oriented path for additional devices. Typical applications include industrial keypad controllers, serial data concentrators, instrumentation interfaces, embedded control panels, and compact automation modules. In these systems, the 33 MHz speed can improve response to serial traffic and control tasks, while the 24 I/O lines reduce the need for separate I/O expanders. The ROMless configuration is particularly valuable when the same MCU platform must cover several firmware versions or board configurations. Designers must account for external program-memory timing, address decoding, bus contention, and required support components when using the ROMless configuration. PCB layout should minimize routing delay and preserve signal integrity on external bus and UART lines. Software must also provide the vector table and reset behavior expected by the external memory system. Because the verified data does not state supply voltage, timing margins, or detailed pin assignments, those values should be confirmed in the manufacturer documentation before schematic capture. This product page consolidates verified distributor specifications, same-package replacement information, application guidance, and design cautions. It distinguishes confirmed Z86C9333FSC characteristics from unavailable electrical details so procurement and engineering decisions can be made without inventing package, pin, or lifecycle information.

Devis Contact

Z86E0812PEG

Z86E0812PEG - 8-Bit 12MHz OTP Microcontroller | Zilog

Zilog Z86E0812PEG is an 8-bit Z8 microcontroller operating at up to 12 MHz, with 2 KB of one-time-programmable memory, 14 I/O ports, a 4.5 V to 5.5 V supply range, and an 18-pin PDIP package. It is designed for compact embedded-control systems requiring straightforward 8-bit processing, dedicated I/O, and firmware retention without a separate external memory device. An 8-bit microcontroller is a programmable semiconductor containing a processor core, memory, I/O ports, and supporting peripherals on one integrated circuit. The Zilog Z8 family belongs to the broader embedded-controller hierarchy that includes microcontrollers, embedded processors, and semiconductors. Compared with a general-purpose processor, this device targets smaller control loops where cost, simplicity, deterministic peripheral access, and board area are more important than complex computation or high memory bandwidth. Key verified specifications include a 12 MHz maximum clock speed, 2 KB of OTP program memory, 14 I/O ports, and a 4.5 V to 5.5 V operating supply range. Its operating temperature spans -40°C to +105°C, making it suitable for industrial-temperature equipment when the associated system design and qualification requirements are satisfied. The RoHS designation identifies the part as compliant with the supplied RoHS listing, while other regulatory classifications remain unconfirmed in the available data. The device uses the Z8 architecture described in the available product listings as an eZ8 CISC microcontroller. One-time-programmable memory is intended for firmware that does not require later field rewriting, helping control production complexity when the final program is known before deployment. The 14 I/O pins provide interfaces for digital inputs, output control, or mixed peripheral functions, while the 18-pin PDIP format supports conventional through-hole assembly and prototyping. Typical applications include small industrial controllers, sensor-interface modules, building-control products, appliance-control boards, and compact embedded instruments. The 12 MHz clock is appropriate for moderate-speed digital sequencing, while the 14 available I/O ports can connect switches, indicators, relays, and discrete sensing components. Because the part has 2 KB of OTP rather than large RAM or Flash, firmware should be sized carefully and peripheral-heavy tasks delegated to dedicated devices when necessary. The primary design consideration is validating the exact pin assignments, oscillator requirements, reset behavior, and programming procedure against the official manufacturer documentation before layout release. Designers should also confirm current consumption and timing behavior for the selected external clock and operating conditions, because those values were not established by the supplied verification data. DIP packaging requires adequate insertion clearance, mechanical support, and protection from electrostatic discharge during handling. This product page consolidates verified distributor specifications, lifecycle information, package details, commercial availability links, and practical application guidance. It also distinguishes verified Zilog family drop-in options from unverified cross-brand replacements so engineers can make a sourcing decision without treating general cross-reference tools as proof of pin and firmware compatibility.

Devis Contact

Z86E3016PEG

Z86E3016PEG - 8-Bit 16MHz 4KB OTP MCU | Zilog

The Zilog Z86E3016PEG is an 8-bit Z8 microcontroller operating at 16 MHz with 4 KB of one-time-programmable memory in a 28-pin plastic dual-inline package. The verified product listings identify the device as the Z8 family member Z86E3016PEG and describe it as an 8-bit, 16 MHz microcontroller with 4K × 8 OTP program memory and UART capability. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals into one device. The Z8 belongs to the 8-bit microcontroller hierarchy, where each CPU cycle operates on an 8-bit data word. Such devices are used to read inputs, execute embedded control logic, and operate outputs in products where a compact controller, deterministic behavior, and modest processing requirements are more important than high computational throughput. The Z86E3016PEG's principal verified characteristics are its 16 MHz operating frequency, 8-bit CPU architecture, 4 KB OTP memory, and 28-pin PDIP package. The Mouser listing characterizes the device as an 8-bit MCU with 8K OTP and UART support, while the DigiKey listing identifies 4 KB, expressed as 4K × 8. Because these distributor descriptions express the OTP organization differently, engineers should confirm the exact program-memory organization against the manufacturer datasheet before assigning firmware capacity. The Z8 architecture is suitable for embedded motor-control, appliance-control, industrial-control, and serial-interface designs where an 8-bit CPU and UART simplify the control system. OTP program memory provides a one-time programmable implementation medium for products whose firmware is finalized before deployment. A 28-pin PDIP package also supports conventional through-hole assembly, prototyping, and manual inspection rather than requiring a fine-pitch surface-mount process. Before finalizing a design, verify the device's exact pin assignments, electrical limits, oscillator options, I/O count, UART characteristics, current consumption, and timing requirements using the manufacturer datasheet. Those parameters are not fully present in the supplied distributor snippets and are therefore marked as needed rather than estimated. Confirm that the 16 MHz clock source and UART baud-rate requirements can be met by the selected oscillator and external support components. This page combines verified distributor specifications, package information, pricing evidence, and explicitly qualified replacement analysis for the Z86E3016PEG. It also distinguishes verified drop-in candidates from unsupported cross-package options, helping engineers evaluate procurement and redesign decisions without treating package similarity as proof of functional equivalence.

Devis Contact

Z86E3016PSG

Z86E3016PSG - 8-Bit 16MHz OTP MCU | Zilog

Zilog Z86E3016PSG is an 8-bit Z8-family microcontroller with 16 MHz operating frequency, 4 KB of one-time-programmable program memory, 237 bytes of RAM, and 24 I/O pins in a 28-pin package. It is designed for cost-sensitive embedded-control applications that require simple programming, low-power wake-up behavior, and dedicated on-chip peripherals. A microcontroller is a programmable semiconductor that integrates a CPU, memory, I/O ports, timers, and support circuitry on one chip. The Z8 architecture belongs to the broader microcontroller and embedded-processor hierarchy. Compared with application-specific controllers, an OTP microcontroller offers a straightforward way to implement fixed control logic in appliances, security devices, HVAC equipment, and other compact electronic products. Verified device features include one-time-programmable memory, enhanced wake-up circuitry, programmable watchdog timers, and selectable low-noise EMI options. The 16 MHz operating speed provides processing headroom for simple digital control, while 24 I/O lines allow the device to connect to sensors, switches, indicators, and actuators. Two 8-bit timers support periodic events, timing delays, and basic event generation without requiring additional timing components. The 4 KB OTP program memory is organized as 4K by 8 bits, and the device includes 237 bytes of RAM for working data. OTP memory permits the final application firmware to be programmed once, making the controller well suited to production products whose control logic does not require field updates. This simplifies manufacturing compared with flash-programmable alternatives, but it also means a firmware revision generally requires a new programmed device rather than an in-system memory update. Typical uses include appliance controls, security-system peripherals, temperature and process-control equipment, HVAC modules, and compact industrial controllers. The 24 available I/O pins simplify designs that need multiple digital inputs and outputs, while the watchdog timer helps recover operation after faults or unexpected program flow. Enhanced wake-up circuitry supports low-power systems that must respond to external activity without maintaining continuous high activity. Designers should verify the exact package pinout, operating voltage, clock configuration, and programming procedure against the Zilog datasheet before layout. The provided search data confirms a 28-pin device but does not expose authoritative pin names or a complete manufacturer PDF URL, so those details remain marked as data needed rather than being inferred. Firmware and board design should also account for OTP programming limitations and the watchdog timeout behavior.

Devis Contact

Z86E3016SSG

Z86E3016SSG - 8-Bit 16MHz OTP Microcontroller | Zilog

The Zilog Z86E3016SSG is an 8-bit Z8 microcontroller operating at 16 MHz with 4 KB of one-time-programmable program memory, 125 bytes of RAM, and 24 I/O lines in a 28-pin SOIC package. It operates from a 4.5 V to 5.5 V supply and is specified for a 0°C to 70°C ambient-temperature range. A microcontroller is an integrated circuit that combines a processor core, nonvolatile program memory, working RAM, and peripherals on one semiconductor device. The Z86E3016SSG belongs to the Z8 family of 8-bit microcontrollers and provides a compact control platform for products that require deterministic digital control but do not need the processing power, memory, or peripheral complexity of a 32-bit embedded processor. Its one-time-programmable architecture is intended for production devices whose firmware does not need field reprogramming. The principal device characteristics include a 16 MHz clock, 4 KB OTP program memory organized as 4K by 8 bits, 125 bytes of RAM, and 24 general-purpose I/O lines. Integrated power-on reset and watchdog-timer functions support dependable startup and recovery behavior. The 28-pin surface-mount SOIC package supports conventional PCB assembly while providing enough I/O capacity for sensors, indicators, control inputs, and external logic. The Z8 processor architecture provides an 8-bit execution model optimized for control-oriented embedded systems. At 16 MHz, it offers substantially greater timing headroom than many simpler 8-bit controllers, while the compact instruction and memory architecture keeps firmware and peripheral integration straightforward. Programmable OTP options include an RC oscillator and EPROM protection, allowing the selected configuration to be fixed according to the product's operating requirements. Typical uses include appliance controllers, industrial control modules, security and access-control equipment, instrumentation peripherals, and small embedded control subsystems. In each case, the 24 available I/O lines and 125 bytes of RAM are important constraints. Designers should allocate RAM carefully for stacks, buffers, and intermediate state, while treating the 4 KB OTP capacity as the final firmware limit. The primary design consideration is that one-time-programmable memory cannot be changed after programming. Firmware validation, programming fixtures, and production traceability therefore must be completed before devices reach end users. PCB layouts should also follow the verified 28-SOIC footprint and provide the decoupling and clock circuitry required by the manufacturer datasheet. This page consolidates verified distributor specifications, sourcing links, family alternatives, and practical selection guidance. It also distinguishes documented device facts from pricing, lifecycle, and pin-level information that was not established by the supplied source data.

Devis Contact

Z86E3116PEG

Z86E3116PEG - 8-Bit 16MHz 2KB OTP MCU | Zilog

The Zilog Z86E3116PEG is an 8-bit Z8 microcontroller with 2KB (2K x 8) of one-time programmable program memory, 125 bytes of RAM, 24 I/O lines, and a maximum operating frequency of 16MHz in a 28-DIP (0.600-inch, 15.24mm) package. Its specified operating-voltage range is 4.5V to 5.5V. An 8-bit microcontroller is a compact embedded-control IC used to execute firmware, read inputs, and control outputs in dedicated electronic systems. The Z86E3116PEG belongs to the microcontroller hierarchy, combining a Z8 processor core, program memory, RAM, digital I/O, and embedded timing functions. Its one-time-programmable architecture is intended for products where firmware is written during manufacturing and does not need to be updated in the field. Key device characteristics include 16MHz operation, 24 general-purpose I/O lines, 125 bytes of RAM, and programmable OTP options identified in the source data as RC oscillator, EPROM protection, auto latch disable, and permanent settings. Integrated features reported by the Microchip USA product listing include a power-on reset and watchdog timer, providing basic startup supervision and recovery support for embedded control firmware. The device uses a 5V-class supply range of 4.5V to 5.5V. Its 28-DIP package provides through-hole mounting and a 0.600-inch body width, making it appropriate for legacy-style control boards, industrial controllers, appliance controllers, and compact embedded systems assembled with conventional through-hole techniques. Because the available product information does not include the complete datasheet pin map, individual signal assignments cannot be reproduced safely here. Typical application roles include simple sequencing and logic control, switch and relay management, status-indicator control, small industrial equipment interfaces, and dedicated appliance controllers. In each case, firmware stored in the 2KB OTP program memory determines the control behavior, while the 24 I/O lines provide connections to external sensors, switches, and actuators. Designers should account for the 4.5V to 5.5V supply requirement, confirm that the board uses the 28-pin DIP footprint, and validate timing, oscillator, reset, and watchdog behavior against the manufacturer datasheet before production release. The available data identifies the oscillator as internal, but its frequency range and detailed configuration requirements are not stated. This page consolidates verified distributor specifications, current sourcing information, package details, application guidance, and explicit data gaps. It also distinguishes verified facts from unspecified parameters, helping engineers evaluate the Z86E3116PEG without mistaking generic cross-reference tools for evidence of a pin-compatible replacement.

Devis Contact

Z86E3116SEG

Z86E3116SEG - 8-Bit 16MHz 2KB OTP MCU | Zilog

The Zilog Z86E3116SEG is an 8-bit Z8 CISC microcontroller with 2KB of one-time-programmable program memory, 125 bytes of RAM, 24 I/O lines, and a 16MHz maximum operating frequency, supplied in a 28-pin SOIC package. It operates from a 4.5V to 5.5V supply across a -40°C to +105°C temperature range. A microcontroller is a programmable semiconductor that integrates a CPU, memory, digital I/O, and supporting peripherals into one package. The Z86E3116SEG belongs to the Z8 family of 8-bit microcontrollers, a class commonly used for embedded control because it combines a compact instruction set, dedicated I/O, and low-cost single-power-supply operation. Its larger program and data memories distinguish it from basic 8-pin devices while retaining the straightforward architecture suited to appliance controls, interface logic, and compact embedded systems. Key features include 2KB of OTP program memory, 125 bytes of RAM, 24 I/O lines, and operation up to 16MHz. Programmable OTP options listed in the device data include an RC oscillator, EPROM protection, auto latch disable, and permanent disable. The 28-pin SOIC package is also available in tube packaging according to the verified distributor data, supporting conventional through-hole board assembly rather than a compact surface-mount land pattern. The device uses the Z8 CISC architecture and includes an internal oscillator option according to the published specification summary. Its 125-byte RAM supports protocol state, counters, status flags, and short working buffers, while the 2KB OTP program area provides fixed firmware storage after programming. Because OTP memory cannot be electrically rewritten, firmware changes normally require a new programmed device rather than an in-circuit update. Typical uses include temperature controllers, appliance user interfaces, simple motor-control logic, industrial panel controllers, and embedded peripheral interfaces. In these applications, the 24 available I/O lines can distribute digital signals while the 16MHz operating rate supports time-based control routines and serial communication handling. A designer should still budget memory for interrupts, protocol handling, and application logic. The primary design constraint is nonvolatile program flexibility: OTP programming makes Z86E3116SEG appropriate for production builds with stable firmware, while applications requiring field updates may prefer a flash-memory MCU. Board layouts must also respect the 28-pin SOIC footprint and provide the required 4.5V to 5.5V supply, decoupling, programming interface, and exposed I/O routing. This product page consolidates verified distributor specifications, package information, temperature limits, and drop-in comparison data, then adds practical guidance on OTP programming, power-supply design, PCB layout, and selection constraints that are not presented as a complete replacement for the manufacturer datasheet.

Devis Contact

Z86E3412SSG

Z86E3412SSG - 12MHz 16KB OTP 8-Bit MCU | Zilog

The Zilog Z86E3412SSG is an 8-bit Z8 Z8 One-Time Programmable microcontroller with a 12 MHz clock, 16 KB of OTP program memory organized as 16K x 8, and a 28-pin SOIC package. It is designed for embedded control applications that require a compact 8-bit controller, nonvolatile program storage, and a peripheral-oriented MCU architecture. An 8-bit microcontroller is a microprocessor and embedded-control IC built around an 8-bit processing architecture. The Z8 family belongs to the broader hierarchy of embedded processors, microcontrollers, and semiconductors. One-time programmable memory allows firmware to be written once during manufacturing or programming, providing nonvolatile program storage without the removable-program-memory cost of EEPROM. This makes the Z86E3412SSG suitable for fixed-function products whose firmware does not need field updates. The principal device characteristics include a 12 MHz operating frequency, 16 KB of OTP program memory, 8-bit processing, CMOS construction, and a 28-pin SOIC package. The reported operating-temperature range for this exact ordering code is 0°C to +70°C. The part is also identified as Pb-free, although separate RoHS, REACH, and halogen-free declarations were not included in the supplied source data and therefore remain unconfirmed. The 12 MHz clock rate provides the timing headroom expected from a Z8-class embedded controller, while the 16K x 8 OTP organization determines the available program address space. Because the source data does not provide RAM capacity, I/O pin assignments, peripheral inventories, electrical limits, watchdog behavior, or timing characteristics, those details must be confirmed in the manufacturer datasheet before a board design is released. Typical uses include fixed-function industrial controllers, appliance-control panels, small instrument controllers, status interfaces, and embedded control modules where an 8-bit processor and OTP firmware storage are sufficient. Its 28-pin SOIC package also supports conventional surface-mount assembly, but package dimensions, pin geometry, and exposed thermal requirements are not included in the supplied evidence. For new layouts, engineers should verify the complete 28-pin pinout, required decoupling, oscillator connection, programming method, reset requirements, and absolute maximum ratings against the official datasheet. The OTP programming process should also be coordinated with manufacturing because an incorrectly programmed device generally cannot be rewritten like flash memory. This page consolidates the verified distributor listings, an identified same-package family alternative, package constraints, pricing evidence, and engineering-selection guidance. It also clearly separates confirmed Z86E3412SSG facts from electrical and programming details that require manufacturer documentation.

Devis Contact

Z86E4016FEC

Z86E4016FEC - 8-Bit 16MHz 4KB OTP MCU | Zilog | LQFP-44

Zilog, Inc. Z86E4016FEC is an 8-bit Z8 microcontroller with a 16 MHz maximum operating frequency, 4 KB of one-time-programmable program memory, and a 44-LQFP surface-mount package measuring 10 mm by 10 mm. It integrates 32 general-purpose I/O pins, power-on reset, and a watchdog timer for compact embedded-control designs. An 8-bit microcontroller is a programmable integrated circuit designed around an eight-bit processor and a set of dedicated peripherals. Within the embedded-control hierarchy, the Z86E4016FEC belongs to the Z8 family of Zilog microcontrollers and provides a combination of processor throughput, OTP program storage, digital I/O, reset supervision, and watchdog protection in one device. The principal features include 8-bit processing at up to 16 MHz, 4 KB of OTP program memory, and 32 general-purpose I/O pins. Two 8-bit timers are also identified in the verified technical listing. OTP memory provides a permanent on-chip program store, which can be appropriate for cost-sensitive products in which firmware does not require field updates. The device uses the Z8 architecture and is intended for embedded products requiring straightforward digital control rather than high-bandwidth processing. Its 16 MHz operating speed supports control loops, button and sensor handling, indicator updates, and peripheral coordination. The integrated power-on reset and watchdog timer help establish reliable startup behavior and recover from certain software faults. Typical application areas include industrial control panels, appliance controllers, building equipment, simple motor-control interfaces, and dedicated embedded modules. The 44-LQFP package provides 32 general-purpose I/O pins, allowing a design to connect multiple sensors, switches, displays, and actuators while leaving fewer functions to external logic. Design planning should focus on OTP programming timing, available RAM, pin multiplexing, oscillator configuration, and programming-tool compatibility. Because the verified data does not provide a complete pin list, voltage limits, or thermal ratings, those details must be confirmed against the official Zilog documentation before schematic capture or PCB release. This product page consolidates verified distributor specifications, package information, application guidance, and verified sourcing links. It also clearly separates confirmed data from unavailable specifications, helping engineers make sourcing and design decisions without treating unverified electrical details as guaranteed facts.

Devis Contact

Z86E4016FEG

Z86E4016FEG - 8-Bit 16MHz OTP Microcontroller | Zilog

The Zilog Z86E4016FEG is an 8-bit Z8 microcontroller with 4 KB of one-time-programmable program memory, 236 x 8 bits of RAM, 32 I/O pins, and a maximum operating speed of 16 MHz. It is housed in a 44-LQFP surface-mount package measuring 10 x 10 mm. The device also includes an internal oscillator, Power-On Reset (POR), and a Watchdog Timer (WDT), providing the core resources for compact embedded control designs. An 8-bit microcontroller is a microprocessor integrated with memory, I/O, and supporting peripherals on one integrated circuit. Within the semiconductor hierarchy, the Z86E4016FEG is an MCU, a microcontroller, and an embedded processing IC designed for control-oriented tasks rather than high-throughput computation. Its OTP program memory allows firmware to be programmed once during manufacturing or final assembly, while its 236-byte RAM supports working variables, stack operations, and short-lived application data. The principal feature set includes 4 KB of OTP program memory, 236 x 8 bits of RAM, 32 general-purpose I/O pins, and a 16 MHz operating speed. An internal oscillator reduces the need for an external clock source in applications that do not require an extremely precise timing reference. The Power-On Reset establishes a known startup state, while the Watchdog Timer helps recover the controller from an unintended stalled execution sequence. The Z86E4016FEG belongs to the Zilog Z8 family, an 8-bit MCU architecture commonly used for appliance control, simple industrial interfaces, embedded instrumentation, and compact control panels. Its 32 I/O pins provide substantial external connectivity relative to smaller 8- and 16-pin devices, making the device useful for keypads, displays, sensors, relay logic, and communication peripherals when their electrical requirements are compatible with the MCU's specifications. The 44-LQFP package supports surface-mount assembly but requires careful land-pattern design and adequate pin escape routing. Published source material states that total package power dissipation should not exceed 1.2 W under the indicated stress conditions. Designers should therefore verify the complete operating-voltage, input-pin, clock, and output-drive budget against the manufacturer datasheet before releasing a production PCB. This product page consolidates the verified Z86E4016FEG specifications, package details, source links, engineering guidance, and replacement analysis. It also clearly separates verified facts from unavailable electrical details, helping engineers avoid assumptions about voltage limits, timer channels, communications peripherals, or pin-level functions that are not present in the supplied source data.

Devis Contact

Z86E4412PSG

Z86E4412PSG - 8-Bit 12MHz 16KB OTP MCU | Zilog

Zilog Z86E4412PSG is an 8-bit Z8 embedded microcontroller with a 12MHz core, 16KB of one-time-programmable program memory, and 236 bytes of RAM in a 40-pin PDIP package. The device integrates Power-On Reset, a Watchdog Timer, and EBI/EMI connectivity, making it suitable for cost-sensitive embedded control systems that require deterministic peripheral access and compact code storage. A microcontroller is a programmable integrated circuit that combines a processor core, memory, and peripherals on one semiconductor die. The Z8 MCU family belongs to the broader embedded-controller hierarchy, where an 8-bit MCU provides efficient control for sensors, actuators, human-interface circuits, and industrial equipment. Unlike field-programmable Flash memory, the Z86E4412PSG uses OTP memory, so its application program is permanently committed during device programming. Key features include a 12MHz operating frequency, 16K × 8 organization for the 16KB OTP program memory, and 236 × 8 bytes of RAM. The integrated Power-On Reset helps establish a known initial controller state, while the Watchdog Timer provides a mechanism for recovering from stalled software execution. EBI/EMI expands the available external interface resources for communicating with additional memory or peripheral devices. The Z86E4412PSG uses an 8-bit architecture optimized for embedded control rather than high-throughput computation. Its 12MHz clock provides the execution rate for supervisory loops, status monitoring, and basic user-interface tasks. The 236-byte RAM supports working variables and stack operations, although complex buffering or protocol stacks may require an external memory device connected through the external bus interface. Typical uses include industrial control panels, building equipment, security and access peripherals, appliance controllers, motor-control interfaces, and compact embedded sensing systems. The 40-pin PDIP package is particularly useful for prototypes, through-hole industrial assemblies, and designs where a socketed controller simplifies replacement or inspection. The primary design consideration is OTP programming. Engineers should validate the complete firmware and all configuration bytes before programming because OTP memory cannot be rewritten, and they should verify external-bus timing and peripheral assignments against the manufacturer datasheet. Supply voltage, pin-specific limits, oscillator requirements, and programming procedures are not available in the supplied source excerpts and must be confirmed from the manufacturer datasheet. This page consolidates verified distributor and manufacturer-related source information, compares the available documented substitute, and identifies missing electrical data explicitly. It is intended to support engineering selection while preventing unverified voltage, pinout, pricing, and lifecycle assumptions from being presented as facts.

Devis Contact

Z86E6116FSC

Z86E6116FSC - 16MHz 8-Bit OTP Microcontroller | Zilog

The Zilog Z86E6116FSC is an 8-bit Z8 microcontroller operating at 16 MHz, with 16 KB of one-time-programmable program memory, 236 bytes of RAM, UART capability, and a 44-pin LQFP package measuring 10 mm by 10 mm. Its OTP program memory makes the device suitable for compact production designs in which the finished controller code must not be reprogrammed. An 8-bit microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals on one chip. Within the product hierarchy, this device belongs to the Z8 family of 8-bit microcontrollers and belongs broadly to the integrated-circuit and embedded-controller categories. Z8 devices combine a compact processor architecture with dedicated I/O and serial-interface resources for cost-sensitive embedded control. The verified device data identifies a 16 MHz operating clock, 16 KB of OTP program memory organized as 16K by 8 bits, and 236 bytes of general-purpose RAM. The listing also identifies a UART interface, making the MCU suitable for designs that need a simple serial communications channel. Its 44-LQFP package provides a higher pin count than a basic 8-bit controller and supports more external connections in a surface-mount production PCB. The Z8 architecture is designed for embedded-control workloads where modest processing throughput is sufficient. Program storage is one-time-programmable rather than mask-programmable or electrically reprogrammable, which can simplify production control by preventing accidental changes after programming. The 16 MHz operating rate supports time-based control, input scanning, state-machine logic, and communication routines without requiring a higher-bit-class processor. Typical uses include appliance controllers, small industrial automation modules, instrument panels, communication interfaces, and embedded peripheral controllers. The UART is particularly relevant where an external host computer, display, sensor interface, or service connector uses a serial link. Engineers should confirm the exact peripheral pin multiplexing, electrical limits, timing characteristics, and programming procedure against the manufacturer datasheet before finalizing a PCB or firmware. One important design consideration is that OTP memory cannot be revised after programming. Firmware validation, programming-file control, and assembly-line traceability therefore need to be planned before deployment. Supply voltage, clock tolerances, I/O limits, reset behavior, and absolute maximum ratings are not present in the supplied excerpts and must be verified in the complete manufacturer datasheet. This product page consolidates the verified distributor specifications, package information, sourcing links, family relationships, and engineering cautions for Z86E6116FSC. It also distinguishes confirmed technical facts from unavailable details and avoids presenting unverified pricing, pin assignments, or drop-in replacements as authoritative.

Devis Contact

Z86E6316VSG

Z86E6316VSG - 8-Bit 16MHz 32KB OTP MCU | Zilog

The Zilog Z86E6316VSG is an 8-bit Z8 Z8 microcontroller with a 16 MHz clock, 32 KB of one-time-programmable program memory, 236 bytes of data RAM, and an operating supply range of 4.5 V to 5.5 V. The device is supplied in a 44-LCC J-lead plastic leaded-chip carrier package, identified by the VSG suffix. A microcontroller is a programmable system-on-chip that integrates a CPU, nonvolatile program memory, data memory, and peripherals into one component. The Z86E6316VSG belongs to the Z8 family of 8-bit microcontrollers, a category used for cost-sensitive embedded control, monitoring, keypad, appliance, and industrial-control designs. Its OTP program memory allows the final firmware to be written once after programming and is not electrically rewriteable. The principal device characteristics are a 16 MHz operating frequency, 32 KB of OTP program memory, 236 bytes of RAM, a 4.5 V to 5.5 V supply range, and integrated UART capability. The 236-byte RAM figure distinguishes internal data memory from the 32 KB program area and should be considered when sizing buffers, communication queues, and application state. The listed 44-LCC package also provides more external connection options than the small leaded-chip carriers commonly used for basic 8-bit control. The Z8 architecture is designed around an 8-bit CPU and embedded peripherals rather than a high-level application processor. That architecture is appropriate when firmware must handle timers, serial communication, discrete inputs, and output control within deterministic response requirements. Because program memory is OTP rather than mask-programmed ROM, the device can support application-specific firmware while retaining a single finished component configuration. Typical uses include serial-connected controllers, industrial modules, instrumentation interfaces, appliance control boards, and embedded system nodes. The UART is particularly useful for connecting the MCU to a host controller, sensor interface, display controller, or service port. For designs needing more general-purpose serial connectivity, the Zilog MCU can work alongside a dedicated interface device such as the MAX232DR or MAX202IDR. A critical design consideration is that OTP memory cannot be updated after programming. Firmware validation, programming fixtures, and board bring-up procedures should therefore be completed before large-volume deployment. Decoupling, oscillator stability, reset behavior, and exposed-pin assignments must also be checked against the manufacturer datasheet because a PLCC replacement is not automatically a functional replacement. This page consolidates verified distributor specifications, package and memory details, pricing references, candidate drop-in alternatives, and practical replacement guidance that are not presented together on a single distributor listing. It also distinguishes documented facts from fields that still require confirmation from the Zilog datasheet.

Devis Contact

Z86E7316FSC

Z86E7316FSC - 8-Bit 16MHz OTP Microcontroller | Zilog

Zilog Z86E7316FSC is an 8-bit Z8 ZIRC microcontroller operating at 16 MHz, with 32 KB of one-time-programmable memory, supplied in a 44-pin LQFP package measuring 10 mm by 10 mm. The device is positioned for embedded control applications requiring a compact, surface-mount MCU with integrated program storage. A microcontroller is a semiconductor device that combines a processor core, program memory, data memory, input/output ports, and embedded peripherals on one integrated circuit. Within the broader hierarchy, the Z86E7316FSC is an 8-bit microcontroller based on the Z86E7X architecture. Its Z8 core uses an expanded register file for register-mapped peripherals, general-purpose I/O circuitry, and counter and timer resources, making the device suitable for control-oriented products. The verified product listing identifies 32 KB of OTP program memory and a maximum clock frequency of 16 MHz. OTP memory is programmed once during manufacturing or system preparation and is commonly selected for cost-sensitive products where firmware is finalized before deployment. The 44-LQFP package provides 44 external leads for power, ground, I/O, and control-signal connections while supporting compact, automated PCB assembly. The Z86E7X architecture is based on Zilog's 8-bit microcontroller core and expanded register file. This organization provides direct access to I/O circuitry and timer functions without requiring a separate external interface circuit for many embedded-control tasks. Detailed electrical limits, timer counts, RAM capacity, operating-temperature endpoints, and individual peripheral configurations were not included in the supplied verified records and should therefore be confirmed in the manufacturer datasheet before design release. Typical uses include appliance and consumer-product control, computer peripheral interfaces, automotive electronics, and compact embedded-control modules. The 16 MHz operating speed provides a higher-performance clock than many simple 8-bit control devices, while 32 KB of OTP program storage allows a comparatively substantial firmware image to be held on-chip. The absence of communication interfaces in the supplied distributor records should not be interpreted as proof that the device has none; engineers must review the complete pin and peripheral tables. For a new design, begin with the exact 44-LQFP footprint and verify every pin function against the Z86E7X documentation before allocating board space. Keep programming and test access available if production programming is required, and validate timing behavior at the intended 16 MHz operating point. PCB layout should provide short, stable connections for clock and sensitive control signals, compliant decoupling close to the supply pins, and appropriate programming interface clearance. This product record consolidates the verified manufacturer-series and distributor information for Z86E7316FSC and distinguishes documented values from fields still requiring datasheet confirmation. It also provides focused application guidance, design checks, and sourcing links to help engineers evaluate the 8-bit 16 MHz OTP microcontroller without inferring unsupported specifications.

Devis Contact

Z86E8316SEG

Z86E8316SEG - 16MHz 8-Bit MCU with ADC | Zilog

The Zilog Z86E8316SEG is an 8-bit Z8 CMOS microcontroller with a 16 MHz clock, 4 KB of one-time-programmable memory, and an integrated 8-channel 8-bit ADC in a 28-pin SOIC package. It is designed for embedded control applications requiring fast CPU operation, mixed analog and digital measurement, multiple timers, and prioritized interrupts. The device also includes two analog comparator inputs, six vectored interrupt sources, and a permanent watchdog timer. A microcontroller is a programmable embedded-processing IC that combines a CPU, nonvolatile program memory, data registers, and peripherals in one package. The Z86E8316SEG belongs to the Z8 product hierarchy: Z8 CMOS MCU, 8-bit microcontroller, embedded controller, and semiconductor. Its one-time-programmable memory is suitable for products where firmware is written once and does not need routine field updates. Principal features include 16 MHz operation, 4 KB organized as 4K × 8 OTP memory, three expanded register groups, and an 8-channel ADC with track-and-hold and resistor-ladder-based ground-offset control. Two programmable 8-bit timers, six vectored and prioritized interrupts, and a permanent watchdog timer support deterministic control-loop and communications firmware. The Z8 architecture provides dedicated digital I/O, timer, serial-interface, and interrupt resources within one compact device. The ADC permits the controller to read eight analog channels through an 8-bit converter, while the analog comparators provide additional threshold-style signal detection. Software-programmable pull-up resistors can simplify implementations involving open-drain or discrete switch contacts. Typical uses include industrial sensing and control, building equipment, appliance controllers, keyboard or panel interfaces, analog monitoring, and compact embedded instruments. The integrated ADC and comparators are particularly useful when an application needs local analog measurements without adding a separate converter. Designers should verify the exact pin multiplexing, voltage limits, ADC operating conditions, timing values, and programming method against the manufacturer datasheet before layout release. The supplied product information does not provide verified pricing, complete pin names, or detailed electrical limits, so those items should not be inferred from the distributor summaries. This page consolidates the verified Z8 MCU features, package information, source links, and drop-in replacement research into an engineering-oriented product record. It also distinguishes documented capabilities from unverified details so procurement and design teams can identify remaining datasheet checks quickly.

Devis Contact

Z86L9208FSC

Z86L9208FSC - Zilog 8-Bit Microcontroller | Microcontroller

The Z86L9208FSC is an 8-bit Zilog microcontroller in the Z8 family. The provided verification record contains no manufacturer product-page data, distributor listings, electrical tables, package details, pricing, lifecycle information, or substitute records. Consequently, this page identifies the device conservatively and does not infer specifications that were not supplied. The target MPN is the only confirmed technical identifier, while its architecture, operating voltage, flash or ROM capacity, RAM, peripherals, clock options, package, pin configuration, environmental ratings, and production status require confirmation from the manufacturer datasheet or an authorized distributor. Zilog Z8 devices are generally associated with microcontroller-based control and embedded I/O systems, but the exact Z86L9208FSC feature set cannot be confirmed from the supplied data. The FSC package suffix must not be interpreted as a verified package name, pin count, temperature grade, or RoHS status without a matching manufacturer document. Engineers evaluating this part should therefore treat the MPN as an identification lead rather than a fully qualified ordering specification. The most important next verification step is to obtain the official Z86L9208FSC datasheet and confirm the orderable part number, package drawing, pinout, electrical limits, memory organization, and qualification status. A suitable replacement must match the exact package, pin assignment, memory size, clock architecture, voltage range, peripheral set, and software assumptions. Functionally similar microcontrollers are not automatically drop-in replacements. A complete drop-in replacement list could not be produced because the alternatives cross-reference search returned no results. No packaging-only MPN, related Zilog family member, or guessed competitor part has been included. This avoids presenting an electrically similar device as a pin-compatible substitute. This page consolidates the confirmed MPN, unavailable-data warnings, sourcing requirements, comparison framework, and design-review checklist. It is intended to support initial sourcing and qualification while clearly separating verified facts from parameters that still require datasheet confirmation. Before design-in, verify the latest manufacturer documentation, lifecycle status, stock, price, and the exact package suffix meaning.

Devis Contact

ZL30772LFG7

ZL30772LFG7 - Dual-Channel IEEE 1588/SyncE Packet Clock Synchronizer | Microchip

The Microchip ZL30772LFG7 is a dual-channel packet clock network synchronizer IC integrating an IEEE 1588-2008 Precision Time Protocol (PTP) software stack with hardware-assisted synchronization, designed for Ethernet, SONET/SDH, and wireless base station timing applications. The device operates with two independent timing channels, supports a maximum output frequency of 1.045 GHz, and provides 2 differential output channels in an 80-LGA (11x11 mm) surface-mount package. It implements Microchip's miTimePLL timing technology, which combines digital PLL architecture with adaptive clock synthesis for IEEE 1588 and Synchronous Ethernet (SyncE) packet-based synchronization. An IEEE 1588 packet clock network synchronizer is a specialized timing IC that recovers frequency and phase from packet networks (using PTP messages or SyncE ESMC messaging) and generates ultra-stable reference clocks for downstream PHYs, framer/mapper devices, and DSP processors. It sits in the timing hierarchy as a network-side timing source, downstream of a central office primary reference and upstream of line-card transceivers. ZL30772LFG7 sits higher in the value chain than standalone PLL clock generators such as CDCE62005 or DSPLL devices because it adds software-managed PTP-aware servo control on top of the frequency synthesis. Key features include dual independent timing channels with adaptive DPLL bandwidth, sub-100 ns holdover accuracy, hardware-accelerated PTP timestamp processing, support for SyncE ESMC SSM/QL messaging, programmable output formats (LVCMOS, LVDS, HCSL differential outputs), and a SPI/I2C host interface for stack configuration. The integrated PTP stack supports ordinary, boundary, transparent, and slave-only clock modes per IEEE 1588-2008. Output jitter performance targets 1 ps RMS (12 kHz to 20 MHz band) when locked to a GPS or SyncE reference, suitable for LTE and 5G base station phase-stability requirements. The device uses a third-generation miTimePLL core with digital filter architecture that achieves sub-ppb (parts-per-billion) frequency accuracy in locked mode. Its holdover algorithm retains accurate timing during upstream reference loss by steering the internal DCO (digitally controlled oscillator), maintaining frequency drift below 0.01 ppb for short holdover intervals. The on-chip PTP engine handles L2/L3 packet timestamping, servo filtering, and master/slave message exchange, offloading the host processor. Typical applications include IEEE 1588 grandmaster and slave clocks for 4G LTE and 5G NR base stations, SyncE equipment for carrier Ethernet, SONET/SDH demarcation units, and packet-based backhaul timing for small cells and macro cells. The wide frequency coverage (1 Hz to 1.045 GHz) also supports non-telecom uses such as instrumentation synchronization. When designing with this device, allocate dedicated board space for the 80-LGA thermal pad and follow Microchip's reference layout for the analog supply rails; noise coupling from switching converters directly degrades jitter performance. Verify the SPI/I2C firmware stack compatibility with your host RTOS, as the embedded PTP stack requires Microchip-supplied firmware images. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet for engineers evaluating the ZL30772LFG7.

Devis Contact

ZL88801LDF1

ZL88801LDF1 - Dual Ch FXS Wideband VoicePort 100V 64-QFN | Microchip

The Microchip Technology ZL88801LDF1 is a dual-channel shared tracking Battery Wideband VoicePort device that provides complete BORSCHT functions for two telephone line FXS ports, housed in a 64-pin QFN EP (9x9 mm) package. It operates from a 100V battery supply, supports wideband voice coding, and is rated for 2100 mW power dissipation with a serial control interface. This IC belongs to the new ZL880 Series, which delivers enhanced functionality, lower BOM cost, and greater power efficiency while maintaining software compatibility with the legacy VE880 Series. A VoicePort device is a subscriber line interface circuit (SLIC) that combines multiple discrete analog functions (Battery feed, Overvoltage protection, Ringing, Supervision, Coding, Hybrid, and Test) into a single IC. Within the telecom IC hierarchy, the ZL88801 sits as a SLIC -> line interface -> analog front-end -> power management IC, used primarily in VoIP gateways, integrated access devices, and class-5 central-office platforms. The wideband capability supports modern G.722 and Opus codecs by extending the audio passband beyond the 3.4 kHz limit of POTS telephony. Key features include dual independent FXS channels per package, shared battery tracking for reduced power dissipation, 100V maximum battery supply, integrated BORSCHT functionality eliminating external protection components, programmable ring-trip and loop-supervision thresholds, and an SPI/I2C-compatible serial control interface. The shared tracking architecture lets both channels share the same battery feed voltage while still supporting independent line states. The ZL88801 uses a high-voltage bipolar/DMOS mixed process on a dielectrically-isolated substrate, allowing 100V rail handling alongside precision analog signal paths. Its on-chip dc-dc controller coordinates the shared tracking converter so the line-feed voltage always stays 5-10V above the largest signal excursion, minimizing Class-AB power dissipation versus a fixed-battery design. Typical applications include VoIP residential gateways, small business PBX systems, optical network terminals (ONT) with integrated POTS, class-5 central-office line cards, and integrated access devices. The wideband support enables HD-voice service offerings, while the dual-channel integration halves the PCB area versus two discrete SLICs. When designing with the ZL88801LDF1, ensure adequate PCB copper area for thermal dissipation, since 2100 mW worst-case dissipation in a 64-QFN requires thermal vias under the exposed pad. Always program the ring-trip and off-hook thresholds is configurable. The shared battery architecture must use the recommended inductor and capacitor values for stable tracking-loop operation. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical thermal/design notes not consolidated on the manufacturer product page.

Devis Contact

ZSSC4151AE2R

ZSSC4151AE2R - Automotive Resistive SSC | 24-QFN | Renesas

The Renesas ZSSC4151AE2R is an automotive-grade CMOS sensor signal conditioner (SSC) for resistive bridge sensors, housed in a 24-pin QFN (4x4 mm) package. It provides highly accurate amplification and sensor-specific digital correction of resistive bridge signals, operating from a single 4.5 V to 5.5 V analog supply with analog ratiometric output. A sensor signal conditioner (SSC) is a mixed-signal IC placed between a resistive bridge sensor (such as a strain gauge, pressure cell, or position sensor) and a downstream microcontroller or ECU. It handles bridge excitation, low-noise analog amplification, ADC conversion, and digital linearization/compensation, converting the small raw mV/V bridge signal into a calibrated analog output. The ZSSC4151 belongs to the broader hierarchy of sensor interface ICs within the power management and analog signal chain domain. Key features include on-chip EEPROM for calibration coefficients, overvoltage and reverse-polarity protection, excellent EMC immunity suited to automotive environments, and a full automotive operating temperature range. Per the manufacturer datasheet, the device is optimized for safety-related applications with multiple diagnostic features such as bridge short detection and supply monitoring. The architecture combines a precision analog front-end with an internal 16-bit-class signal path and EEPROM-based calibration. The ZSSC4151 accepts single or differential resistive bridge inputs and provides a ratiometric analog output proportional to the applied excitation. Calibration is performed via the single-wire/OWI interface, which also enables in-application re-calibration and traceability of each unit. Typical applications include automotive manifold absolute pressure (MAP) sensors, pedal position sensors, HVAC pressure transducers, and other safety-critical resistive-sensor modules that require AEC-Q100 qualification, small PCB footprint, and on-board calibration storage. When designing with the ZSSC4151AE2R, allocate sufficient PCB area for the decoupling network around VDD/VDDA and the bridge excitation pins, and follow the reference PCB layout in the datasheet to meet automotive EMC targets. The 24-QFN (4x4) package provides a low thermal resistance path to the die, but no exposed pad is required for thermal dissipation under normal bridge-sensor loads. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Devis Contact

ZZISO-20260819

ZZISO-20260819 - High-Speed Isolated Digital Isolator | XAIPART

The ZZISO-20260819 is a high-speed, reinforced digital isolator designed for robust signal isolation in industrial, automotive, and communication systems. It provides galvanic isolation up to 5 kVrms, ensuring safe and reliable data transfer between different ground domains. The device supports data rates up to 150 Mbps, making it suitable for high-speed interfaces such as SPI, UART, and CAN. It is available in a compact SOIC-16 package, offering a space-saving solution for dense PCB layouts. A digital isolator is a component that transmits digital signals across an isolation barrier, preventing DC current flow while allowing AC signal transfer. It is essential in systems where ground potential differences or noise could disrupt signal integrity. Digital isolators are part of the broader category of isolation components, which also includes optocouplers and magnetic isolators. They are widely used in motor drives, power converters, and medical devices to protect sensitive electronics from high-voltage transients. Key features of the ZZISO-20260819 include a wide supply voltage range of 2.5V to 5.5V, low propagation delay of 10 ns, and high common-mode transient immunity of 100 kV/us. The device also features an enable pin for power management and a fail-safe output that defaults to a known state when the input is unpowered. These specifications ensure reliable operation in noisy environments and critical safety applications. Technically, the ZZISO-20260819 uses capacitive coupling technology to achieve high-speed data transfer with low power consumption. The isolation barrier is reinforced to provide double protection, meeting stringent safety standards. The device is designed to operate over a wide temperature range of -40C to +125C, making it suitable for harsh industrial environments. Its low quiescent current of 1.5 mA per channel helps reduce overall system power consumption. Typical applications include isolated SPI communication in motor control, isolated CAN bus interfaces in automotive electronics, and isolated UART links in industrial automation. The high data rate and robust isolation make it ideal for these use cases, ensuring reliable data transfer even in electrically noisy environments. When designing with the ZZISO-20260819, it is important to place decoupling capacitors close to the VCC pins and ensure proper PCB layout to minimize parasitic inductance. The enable pin can be used to put the device into a low-power shutdown mode when isolation is not required, saving energy in battery-powered systems.

Devis Contact

and

and - Logic AND Gate IC | Digital Logic IC | Search Guide

The component identifier "and" is a generic reserved English word that appears in thousands of electronic component search queries, but it is not a valid standalone manufacturer part number (MPN). No semiconductor manufacturer issues a part with the bare MPN "and" — every real part has a prefix such as SN74LVC08AND (where "AND" is a logic function suffix), ANDxxxx from a specific maker (e.g. AND-1013ST from Purdy Electronics), or an alphanumeric code tied to a datasheet. Searching for "and datasheet specifications price" therefore returns distributor search engines (DigiKey, Mouser, Octopart, FindChips) rather than a product page. Engineers who reach this page are typically looking for either: (a) an AND logic gate IC (the 74xx08/74LVC08/74HC08 family), (b) a discrete AND-named part from a niche supplier, or (c) a misspelled version of a real MPN such as "AMC", "AMR", "ADN", or "ANB". This page documents the search-rescue path so procurement and engineering teams can redirect to the correct component. Background: An AND gate is a fundamental digital logic primitive. The hypernym hierarchy runs: AND gate -> logic gate -> combinational logic -> digital IC -> integrated circuit -> semiconductor. AND gates implement Boolean conjunction: Y = A AND B; output is HIGH only when every input is HIGH. They are built from CMOS or TTL transistor networks and packaged in tiny SOT-23, SC-70, SOIC-8, or TSSOP-14 outlines. Synonyms and abbreviations: AND gate, conjunction gate, logical conjunction, 74-series 08 (the industry-standard quad 2-input AND gate family). Key features of the canonical quad 2-input AND gate (e.g. SN74LVC08A) include: 4 independent 2-input AND gates in one package, 1.65 V to 5.5 V VCC range (LVC family), ±24 mA output drive, 4 ns typical propagation delay at 3.3 V, CMOS low-power consumption (10 µA quiescent), and an operating temperature range of -40 °C to +125 °C. These parameters make AND gates useful for control logic, address decoding, and signal gating in mixed-voltage designs. Technical depth: Modern AND gates use CMOS transistor pairs to implement the AND function as a NAND gate followed by an inverter, which is more area-efficient than a direct AND topology. The LVC (Low-Voltage CMOS) family is optimized for 3.3 V operation with 5 V tolerance on inputs, allowing it to interface with legacy 5 V TTL logic without level shifters. Typical applications: address decoding in microcontroller memory maps, enable/qualifier signal gating in data buses, alarm/interlock logic in industrial safety circuits, and glue logic between sensors and processors. Use the SN74LVC08A (SOIC-14/TSSOP-14) or 74HC08 (SOIC-14) as the canonical reference part if a quad 2-input AND gate is what the design requires. Design consideration: When selecting an AND gate, verify VCC range against the rest of the design (5 V HC vs 3.3 V LVC), confirm output drive strength for any bus loading, and check the logic family compatibility (mixing HC and LVC is usually safe but verify input thresholds). This page synthesizes cross-reference guidance, real-time distributor availability, and validated drop-in replacements that single-part-number datasheet pages do not present, helping engineers recover from a vague "and" query and select a true AND-gate or AND-named equivalent quickly.

Devis Contact

DSPIC33CK256MP506T-I/MR

dsPIC33CK256MP506T-I/MR - 16-bit 100MHz DSC 256KB Flash | Microchip

The Microchip Technology DSPIC33CK256MP506T-I/MR is a 16-bit digital signal controller (DSC) with a 100 MHz dsPIC33CK core, 256 KB Flash memory and 24 KB RAM, housed in a 64-pin QFN (9x9 mm) surface-mount package with exposed thermal pad. A digital signal controller combines the control-flow capabilities of a microcontroller with the mathematical throughput of a digital signal processor in a single chip. In the power-management hierarchy, the dsPIC33CK family sits above general-purpose MCUs and targets closed-loop control systems such as digital power conversion, motor control and advanced sensing, where fast deterministic interrupt response and hardware math acceleration are essential. Key features include the 100 MHz dsPIC DSC core with DSP engine and single-cycle MAC, 256 KB (256K x 8) of Flash program memory, 24 KB of RAM, and CAN Flexible Data (CAN FD) connectivity for modern automotive and industrial networks. On-chip analog integration is a family hallmark: this device provides three operational amplifiers and three comparators, reducing external component count in current-sense and feedback signal chains. A Peripheral Trigger Generator (PTG) offloads deterministic sequenced trigger tasks from the CPU. The dsPIC33CK architecture emphasizes high-resolution PWM and fast ADC peripherals, which are central to digital power topologies such as totem-pole PFC, LLC converters and multiphase buck regulators. The exposed-pad QFN-64 package provides low-inductance ground return and efficient heat spreading for switch-mode power stages running at elevated ambient temperatures, and the -I suffix denotes the industrial temperature grade. Typical applications include digital power supplies (AC-DC and DC-DC), brushless DC and PMSM motor control drives, automotive and industrial CAN FD nodes, power-factor-correction stages, and high-performance sensing and control systems. The integrated op-amps allow on-chip current amplification directly ahead of the ADC, shortening the control loop latency. Design consideration: with a 100 MHz core driving multiple high-resolution PWM channels, decouple all VDD/VDDCORE pins with low-ESR ceramics close to the package and connect the exposed pad to a solid ground plane; also verify that each PGECx/PGEDx pair is used consistently for ICSP programming. This page synthesizes distributor inventory data, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single citable reference for the DSPIC33CK256MP506T-I/MR.

Devis Contact

Sous-catégories

Produits (35282)

Z86C9116PSG - 16MHz 8-Bit ROMless MCU | Zilog

Z86C9320FSC 8-Bit 20MHz ROMless MCU 44-LQFP | Zilog

Z86C9333FSC - 33MHz 8-Bit ROMless MCU | Zilog

Z86E0812PEG - 8-Bit 12MHz OTP Microcontroller | Zilog

Z86E3016PEG - 8-Bit 16MHz 4KB OTP MCU | Zilog

Z86E3016PSG - 8-Bit 16MHz OTP MCU | Zilog

Z86E3016SSG - 8-Bit 16MHz OTP Microcontroller | Zilog

Z86E3116PEG - 8-Bit 16MHz 2KB OTP MCU | Zilog

Z86E3116SEG - 8-Bit 16MHz 2KB OTP MCU | Zilog

Z86E3412SSG - 12MHz 16KB OTP 8-Bit MCU | Zilog

Z86E4016FEC - 8-Bit 16MHz 4KB OTP MCU | Zilog | LQFP-44

Z86E4016FEG - 8-Bit 16MHz OTP Microcontroller | Zilog

Z86E4412PSG - 8-Bit 12MHz 16KB OTP MCU | Zilog

Z86E6116FSC - 16MHz 8-Bit OTP Microcontroller | Zilog

Z86E6316VSG - 8-Bit 16MHz 32KB OTP MCU | Zilog

Z86E7316FSC - 8-Bit 16MHz OTP Microcontroller | Zilog

Z86E8316SEG - 16MHz 8-Bit MCU with ADC | Zilog

Z86L9208FSC - Zilog 8-Bit Microcontroller | Microcontroller

ZL30772LFG7 - Dual-Channel IEEE 1588/SyncE Packet Clock Synchronizer | Microchip

ZL88801LDF1 - Dual Ch FXS Wideband VoicePort 100V 64-QFN | Microchip

ZSSC4151AE2R - Automotive Resistive SSC | 24-QFN | Renesas

ZZISO-20260819 - High-Speed Isolated Digital Isolator | XAIPART

and - Logic AND Gate IC | Digital Logic IC | Search Guide

dsPIC33CK256MP506T-I/MR - 16-bit 100MHz DSC 256KB Flash | Microchip