Telephony Interfaces
Produits (2)
SI3016-F-FS - 3.3V 16-SOIC Global DAA | Silicon Labs
The Silicon Labs SI3016-F-FS is a 3.3 V enhanced global direct access arrangement, or DAA, that provides a programmable line-side interface for telephone systems. The 16-pin small outline integrated circuit integrates line-voltage monitoring, loop-current monitoring, parallel handset detection, overload protection, and a programmable line interface in one device. A direct access arrangement is the line-side interface between a voice codec or modem and the analog telephone network. It controls line voltage and loop current while providing the ringing, speech-path, and off-hook functions required by global PSTN equipment. Integrating these functions reduces the need for a discrete analog front end, isolation transformer, relays, opto-isolators, and a separate two-wire to four-wire hybrid. The SI3016-F-FS operates from a 3.3 V supply and is specified for 3.2 dBm transmit and receive levels. Its parallel handset-detection function supports parallel off-hook sensing, while the overload-protection feature limits the effect of excessive line voltage. The on-hook line-monitor current is specified at 7 microamperes, helping the host system determine line state with low standby consumption. The programmable line interface is the key architectural feature. Registers allow the host processor to configure operating characteristics instead of relying on a large collection of discrete analog networks. This makes the SI3016-F-FS suitable for designs in which the same line interface must serve multiple international telephone-network requirements or be adjusted during production and test. Typical applications include Voice over IP terminal adapters, voice gateways, PBX line cards, fax and multifunction-printer interfaces, data modems, and embedded telephone equipment. The device is also useful in legacy fax machines and other products that retain a copper-loop connection while using a digital processor for call control and audio processing. Designers should follow the Silicon Labs si3016 datasheet for the line-termination network, external component values, hook-state timing, and PCB layout. Keep sensitive analog and telephone-network nodes away from high-current digital paths, and place line-interface and bypass components close to their associated pins to reduce coupling and ringing. This page consolidates the device function, verified distributor availability, same-family alternatives, and practical integration considerations. It supports faster component selection for engineers designing compact, programmable telephone line interfaces without treating the DAA as a generic modem block.
SI3016-F-FSR - 3.3V 16-SOIC Global DAA | Silicon Labs (Tape & Reel)
The Silicon Labs SI3016-F-FSR is a 3.3 V enhanced global direct access arrangement, or DAA, that provides a programmable line-side interface for telephone systems. The 16-pin small outline integrated circuit integrates line-voltage monitoring, loop-current monitoring, parallel handset detection, overload protection, and a programmable line interface in one device. A direct access arrangement is the line-side interface between a voice codec or modem and the analog telephone network. It controls line voltage and loop current while providing the ringing, speech-path, and off-hook functions required by global PSTN equipment. Integrating these functions reduces the need for a discrete analog front end, isolation transformer, relays, opto-isolators, and a separate two-wire to four-wire hybrid. The SI3016-F-FSR operates from a 3.3 V supply and is specified for 3.2 dBm transmit and receive levels. Its parallel handset-detection function supports parallel off-hook sensing, while the overload-protection feature limits the effect of excessive line voltage. The on-hook line-monitor current is specified at 7 microamperes, helping the host system determine line state with low standby consumption. The programmable line interface is the key architectural feature. Registers allow the host processor to configure operating characteristics instead of relying on a large collection of discrete analog networks. This makes the SI3016-F-FSR suitable for designs in which the same line interface must serve multiple international telephone-network requirements or be adjusted during production and test. Typical applications include Voice over IP terminal adapters, voice gateways, PBX line cards, fax and multifunction-printer interfaces, data modems, and embedded telephone equipment. The device is also useful in legacy fax machines and other products that retain a copper-loop connection while using a digital processor for call control and audio processing. Designers should follow the Silicon Labs si3016 datasheet for the line-termination network, external component values, hook-state timing, and PCB layout. Keep sensitive analog and telephone-network nodes away from high-current digital paths, and place line-interface and bypass components close to their associated pins to reduce coupling and ringing. This page consolidates the device function, verified distributor availability, same-family alternatives, and practical integration considerations. It supports faster component selection for engineers designing compact, programmable telephone line interfaces without treating the DAA as a generic modem block.