A4980KLPTR-T vs A3977SLPTR-T Comparaison

Comparaison détaillée côte à côte de A4980KLPTR-T par Allegro MicroSystems et A3977SLPTR-T par Allegro MicroSystems. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Allegro MicroSystems
A4980KLPTR-T A4980KLPTR-T - 28V 1.4A Bipolar Stepper Driver, TSSOP-28EP | Allegro

A4980KLPTR-T - 28V 1.4A Bipolar Stepper Driver, TSSOP-28EP | Allegro

A4980KLPTR-T ✓ Actif

Comparaison des spécifications

Paramètre A4980KLPTR-T A3977SLPTR-T
Marque Allegro MicroSystems Allegro MicroSystems
Catégorie Motor Drivers Motor Drivers
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $1,20 $3,65
Motor Type Bipolar stepper Bipolar stepper motor
Step Resolution Full, 1/2, 1/4, 1/16 microstep —
Motor Supply Voltage (max) 28 V —
Output Current per Phase (peak) ±1.4 A —
Output Current per Phase (continuous, typical) ±750 mA —
Low-side RDS(on) 0.5 Ω typical —
Output Stage DMOS with synchronous rectification —
Control Interface Step/Direction + SPI-compatible serial —
Current Decay Modes Automatic selection of Mixed, Fast, Slow —
Shoot-through Protection Yes, internal timers —
Output Short-circuit Protection Yes —
Stalled Rotor Detection Yes (flag via SPI) —
Low-load-current Detection Yes (flag via SPI) —
Boîtier 28-pin TSSOP with exposed thermal pad (KLP) 28-pin TSSOP-EP (exposed pad)
Type de montage Surface Mount Surface Mount
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] —
AEC-Q100 Automotive Grade Automotive qualified (per datasheet title) —
Statut RoHS Compliant Compliant
Tape & Reel Quantity 4000 per reel (T suffix) —
Step Modes — Full, half, quarter, eighth
Configuration de sortie — Dual full H-bridge (2 outputs)
Load Voltage (Motor Supply) — 8 V to 35 V
Logic Supply Voltage — 3 V to 5.5 V
Output Current (per phase) — ±2.5 A
Maximum Output Voltage Rating — 35 V
rDS(on) - Source DMOS (typical) — 0.45 ohm
rDS(on) - Sink DMOS (typical) — 0.36 ohm
Current Control — Fixed off-time PWM with slow/fast/mixed decay
Redressement synchrone — Yes (internal)
Sleep Mode — Yes (low-power)
Automatic Decay Mode Selection — Yes
Température de fonctionnement — -20 C to +85 C

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis