AD5258BRMZ10-R7 vs AD5258BRMZ1-R7 Comparaison
Comparaison détaillée côte à côte de AD5258BRMZ10-R7 par Analog Devices et AD5258BRMZ1-R7 par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | AD5258BRMZ10-R7 | AD5258BRMZ1-R7 |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Amplifier ICs | Digital Potentiometers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,21 | $1,05 |
| Fonction | Nonvolatile digital potentiometer (DigiPOT) | — |
| Number of Circuits | 1 | 1 |
| Number of Taps | 64 | 64 positions |
| End-to-End Resistance (R-TOTAL) | 10 kΩ | — |
| Resistance Tolerance | ±30% (stored in EEPROM, 0.1% rcu accuracy) | 0.1 % accuracy stored in EEPROM |
| Interface | I²C-compatible (2-wire serial) | I²C-compatible (2-wire serial) |
| Type de mémoire | Nonvolatile EEPROM | Nonvolatile EEPROM (wiper settings retained) |
| Supply Voltage (VDD) | 2.7 V to 5.5 V | 2.7 V to 5.5 V [DATA_NEEDED: full VDD range - confirm in datasheet Electrical Characteristics] |
| Logic Interface Voltage (VLOGIC) | 1.8 V to 5.5 V | — |
| Wiper Resistance | [DATA_NEEDED: wiper resistance] | 75 Ω (typical) |
| Temperature Coefficient | 30 ppm/°C (typ) | — |
| Power-On EEPROM Refresh | < 1 ms | — |
| Address Decode Pins | AD0, AD1 (4 slave addresses) | — |
| Plage de température de fonctionnement | -40 °C to +125 °C | -40 °C to +125 °C |
| Boîtier | 10-pin MSOP (3 mm × 4.9 mm) | 10-pin MSOP (3 mm × 4.9 mm) |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | 1 (unlimited) | MSL 1 (per JEDEC J-STD-020) |
| Statut RoHS | Compliant | Compliant |
| Automotive Grade | Yes (BRMZ suffix, automotive-qualified) | — |
| End-to-End Resistance | — | 1 kΩ |
| Differential Non-Linearity (DNL) | — | ±1 LSB (max) |
| VLogic Pin Range | — | 1.8 V to 5.5 V (interface logic level) |
| Power-on EEPROM Refresh | — | <1 ms |
| Address Pins | — | AD0 and AD1 (decode up to 4 devices on bus) |
| Software Write Protect | — | Yes (command-based) |
| Lead-Free | — | Yes |
| Tape and Reel Packaging | — | Yes (-R7 suffix, 7" reel) |