AD5258BRMZ10-R7 vs AD5258BRMZ100 Comparaison
Comparaison détaillée côte à côte de AD5258BRMZ10-R7 par Analog Devices et AD5258BRMZ100 par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
AD5258BRMZ100 - 100kΩ 64-Tap I2C Nonvolatile DigiPot | ADI
AD5258BRMZ100 ⚠ Dernier achatComparaison des spécifications
| Paramètre | AD5258BRMZ10-R7 | AD5258BRMZ100 |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Dernier achat |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,21 | $1,08 |
| Fonction | Nonvolatile digital potentiometer (DigiPOT) | — |
| Number of Circuits | 1 | — |
| Number of Taps | 64 | 64 |
| End-to-End Resistance (R-TOTAL) | 10 kΩ | — |
| Resistance Tolerance | ±30% (stored in EEPROM, 0.1% rcu accuracy) | ±30 % |
| Interface | I²C-compatible (2-wire serial) | I²C-compatible (2-wire) |
| Type de mémoire | Nonvolatile EEPROM | — |
| Supply Voltage (VDD) | 2.7 V to 5.5 V | — |
| Logic Interface Voltage (VLOGIC) | 1.8 V to 5.5 V | — |
| Wiper Resistance | [DATA_NEEDED: wiper resistance] | — |
| Temperature Coefficient | 30 ppm/°C (typ) | — |
| Power-On EEPROM Refresh | < 1 ms | — |
| Address Decode Pins | AD0, AD1 (4 slave addresses) | AD0 (2 pins, supports up to 4 devices on bus) |
| Plage de température de fonctionnement | -40 °C to +125 °C | −40 °C to +125 °C |
| Boîtier | 10-pin MSOP (3 mm × 4.9 mm) | 10-pin MSOP (RM), 3 mm × 4.9 mm |
| Type de montage | Surface Mount | — |
| Niveau MSL | 1 (unlimited) | — |
| Statut RoHS | Compliant | Compliant |
| Automotive Grade | Yes (BRMZ suffix, automotive-qualified) | — |
| Product Type | — | Digital Potentiometer (DigiPOT) |
| Number of Channels | — | 1 |
| End-to-End Resistance | — | 100 kΩ |
| EEPROM-stored Tolerance Accuracy | — | 0.1 % |
| VLOGIC Range | — | 2.7 V to 5.5 V |
| Analog Supply / Terminal Voltage | — | 2.7 V to 5.5 V |
| Power-on EEPROM Refresh Time | — | < 1 ms |
| Nonvolatile Memory | — | Yes (wiper settings retained on power-down) |
| Software Write Protect | — | Yes (via I²C command) |
| Taper | — | Linear |