AD5258BRMZ100 vs AD5258BRMZ1-R7 Comparaison
Comparaison détaillée côte à côte de AD5258BRMZ100 par Analog Devices et AD5258BRMZ1-R7 par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
AD5258BRMZ100 - 100kΩ 64-Tap I2C Nonvolatile DigiPot | ADI
AD5258BRMZ100 ⚠ Dernier achatComparaison des spécifications
| Paramètre | AD5258BRMZ100 | AD5258BRMZ1-R7 |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Amplifier ICs | Digital Potentiometers |
| Statut du cycle de vie | Dernier achat | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,08 | $1,05 |
| Product Type | Digital Potentiometer (DigiPOT) | — |
| Number of Channels | 1 | — |
| Number of Taps | 64 | 64 positions |
| End-to-End Resistance | 100 kΩ | 1 kΩ |
| Resistance Tolerance | ±30 % | 0.1 % accuracy stored in EEPROM |
| EEPROM-stored Tolerance Accuracy | 0.1 % | — |
| Interface | I²C-compatible (2-wire) | I²C-compatible (2-wire serial) |
| Address Decode Pins | AD0 (2 pins, supports up to 4 devices on bus) | — |
| VLOGIC Range | 2.7 V to 5.5 V | — |
| Analog Supply / Terminal Voltage | 2.7 V to 5.5 V | — |
| Power-on EEPROM Refresh Time | < 1 ms | — |
| Nonvolatile Memory | Yes (wiper settings retained on power-down) | — |
| Software Write Protect | Yes (via I²C command) | Yes (command-based) |
| Plage de température de fonctionnement | −40 °C to +125 °C | -40 °C to +125 °C |
| Boîtier | 10-pin MSOP (RM), 3 mm × 4.9 mm | 10-pin MSOP (3 mm × 4.9 mm) |
| Taper | Linear | — |
| Statut RoHS | Compliant | Compliant |
| Number of Circuits | — | 1 |
| Type de mémoire | — | Nonvolatile EEPROM (wiper settings retained) |
| Differential Non-Linearity (DNL) | — | ±1 LSB (max) |
| Wiper Resistance | — | 75 Ω (typical) |
| VLogic Pin Range | — | 1.8 V to 5.5 V (interface logic level) |
| Supply Voltage (VDD) | — | 2.7 V to 5.5 V [DATA_NEEDED: full VDD range - confirm in datasheet Electrical Characteristics] |
| Power-on EEPROM Refresh | — | <1 ms |
| Address Pins | — | AD0 and AD1 (decode up to 4 devices on bus) |
| Type de montage | — | Surface Mount |
| Niveau MSL | — | MSL 1 (per JEDEC J-STD-020) |
| Lead-Free | — | Yes |
| Tape and Reel Packaging | — | Yes (-R7 suffix, 7" reel) |