AD620ANZ vs INA129P Comparaison
Comparaison détaillée côte à côte de AD620ANZ par Analog Devices et INA129P par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
AD620ANZ - 1-Channel Low-Power Instrumentation Amplifier | Analog Devices
AD620ANZ UnknownComparaison des spécifications
| Paramètre | AD620ANZ | INA129P |
|---|---|---|
| Marque | Analog Devices | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Unknown | Actif |
| Product Type | Low-cost, low-power, high-accuracy instrumentation amplifier | Precision low-power instrumentation amplifier |
| Number of Channels | 1 channel | — |
| Gain Range | 1 to 10,000 | 1 to 10,000 |
| External Gain Setting | One external resistor | — |
| Gain-Bandwidth Product | 1 MHz | — |
| Maximum Supply Current | 1.3 mA | — |
| Tension d'alimentation | [DATA_NEEDED: supply voltage range] | — |
| Input Bias Current | 2 nA | — |
| Common-Mode Rejection | 110 dB | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Noise | [DATA_NEEDED: input noise] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Boîtier | 8-lead PDIP | 8-pin plastic DIP (PDIP) |
| Package Family | PDIP family, through-hole DIP | — |
| Type de montage | Through-hole | Through-hole |
| Statut RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | not_applicable | [DATA_NEEDED: AEC-Q100 qualification] |
| Applications | Precision data acquisition, sensor conditioning, portable instrumentation | — |
| Amplifier Circuit Count | — | 1 |
| Maximum Offset Voltage | — | 50 uV |
| Maximum Offset Drift | — | 0.5 uV/°C |
| Maximum Input Bias Current | — | 5 nA |
| Minimum Common-Mode Rejection | — | 120 dB |
| Input Protection | — | ±40 V |
| Supply Voltage Range | — | ±18 V |
| Bandwidth at Gain 100 | — | 200 kHz |
| Architecture | — | Three-op-amp instrumentation-amplifier design |
| Gain Adjustment | — | Single external resistor |
| Temperature Range | — | -40°C to +85°C |
| Low-Power Feature | — | Low-power instrumentation-amplifier design |
| Current Feedback | — | Yes |