AD7265BCPZ-REEL vs AD7858LARS-REEL Comparaison
Comparaison détaillée côte à côte de AD7265BCPZ-REEL par Analog Devices et AD7858LARS-REEL par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
AD7858LARS-REEL - 12-bit 100kSPS 8-Ch SAR ADC | Analog Devices
AD7858LARS-REEL ✓ ActifComparaison des spécifications
| Paramètre | AD7265BCPZ-REEL | AD7858LARS-REEL |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | ADC/DAC | ADC/DAC |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $8,15 | $6,78 |
| Architecture | SAR (Successive Approximation) | — |
| Number of Bits | 12 bits | — |
| Number of Channels | 2 ADCs x 3 inputs each = 6/12 inputs | — |
| Sample Rate | 1 MSPS (per ADC) | — |
| Tension d'alimentation | 2.7 V to 5.25 V (single) | — |
| Input Range | 0 V to VREF or 0 V to 2xVREF, differential | — |
| Internal Reference | 2.5 V (overdrivable, 100 mV to VDD external) | — |
| Input Bandwidth (Track-and-Hold) | >30 MHz | — |
| Interface | Serial (SPI-compatible, two SDATA outputs) | — |
| Boîtier | 32-lead LFCSP-VQ (5x5 mm) - CP suffix | 24-SSOP (5.30 mm width, 0.65 mm pitch) |
| Température de fonctionnement | -40 C to +85 C (industrial) | — |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | 3 (per JEDEC J-STD-020) | — |
| Statut RoHS | Compliant | Compliant (REEL suffix; LARS body is lead-free; older reels may be non-compliant - check lot) |
| Reel Quantity | REEL: 1,500 per reel | — |
| Manufacturer | — | Analog Devices Inc. |
| Part Number | — | AD7858LARS-REEL |
| Part Status | — | Active |
| Product Type | — | SAR Analog-to-Digital Converter (ADC) |
| Résolution | — | 12 bit |
| Number of Input Channels | — | 8 single-ended / 4 pseudo-differential |
| Fréquence d'échantillonnage | — | 100 kSPS (AD7858L grade; AD7858 grade is 200 kSPS) |
| Supply Voltage (VDD) | — | 3 V to 5.5 V (single supply) |
| Supply Current (Active, VDD=3V) | — | 1.5 mA typ (4.5 mW) |
| Supply Current (Active, VDD=5V) | — | [DATA_NEEDED: typical active current at 5V] |
| Power Dissipation (VDD=3V) | — | 4.5 mW (low-power L grade) |
| Power-Down Current | — | 25 µW |
| Input Type | — | Single-ended or pseudo-differential |
| Data Interface | — | Serial, SPI/QSPI/MICROWIRE/8051-compatible |
| Calibration | — | System and self-calibration, autocalibration on power-up |
| Plage de température de fonctionnement | — | -40 C to +85 C |
| Packaging | — | Tape & Reel |