AD745SQ vs AD745AQ Comparaison
Comparaison détaillée côte à côte de AD745SQ par Analog Devices et AD745AQ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | AD745SQ | AD745AQ |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | NRND | NRND |
| Amplifier Type | JFET-input operational amplifier | Voltage-feedback operational amplifier |
| Number of Circuits | 1 circuit | — |
| Gain-Bandwidth Product | 20 MHz | 20 MHz |
| Slew Rate | 12.5 V/µs | 12.5 V/us |
| Courant d'alimentation | 8 mA | — |
| Plage de température de fonctionnement | -55°C to +125°C | [DATA_NEEDED: operating temperature range] |
| Boîtier | 8-pin CERDIP | 8-pin CERDIP |
| Type de montage | Through-hole | Through-hole |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Voltage Noise Density | [DATA_NEEDED: voltage noise density] | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Swing | [DATA_NEEDED: output voltage swing] | — |
| Gain Error | [DATA_NEEDED: gain error] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | Not applicable | — |
| Input Transistor Type | — | JFET |
| Number of Amplifiers | — | 1 amplifier |
| Maximum Input Offset Voltage | — | 1 mV |
| Maximum Input Bias Current | — | 250 pA |
| Open-Loop Gain | — | 90 dB |
| Input Voltage Offset Drift | — | 90 uV/°C |
| Compensation | — | Built-in compensation |
| Tension d'alimentation | — | [DATA_NEEDED: supply voltage range] |
| Input Noise Voltage | — | [DATA_NEEDED: input noise voltage] |
| Input Noise Current | — | [DATA_NEEDED: input noise current] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Output Current | — | [DATA_NEEDED: output current] |
| Unity-Gain Bandwidth | — | [DATA_NEEDED: unity-gain bandwidth] |