AD7709ARU-REEL vs AD7707BRZ-REEL Comparaison

Comparaison détaillée côte à côte de AD7709ARU-REEL par Analog Devices et AD7707BRZ-REEL par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Analog Devices
AD7707BRZ-REEL AD7707BRZ-REEL - 16-Bit Sigma-Delta ADC | Analog Devices

AD7707BRZ-REEL - 16-Bit Sigma-Delta ADC | Analog Devices

AD7707BRZ-REEL ✓ Actif

Comparaison des spécifications

Paramètre AD7709ARU-REEL AD7707BRZ-REEL
Marque Analog Devices Analog Devices
Catégorie ADC/DAC ADC/DAC
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $7,10 $9,40
Number of Bits 16 —
Number of Input Channels 2 (fully-differential) or 4 (pseudo-differential) —
Architecture Sigma-Delta (Σ-Δ) Sigma-Delta
Fréquence d'échantillonnage 105 sps —
Data Interface SPI, QSPI, MICROWIRE, DSP-compatible serial —
Input Voltage Range (unipolar) 1.024 V to 6.144 V —
Input Voltage Range (bipolar) ±1.024 V to ±6.144 V —
PGA Gain Range 1 to 128 —
Analog Supply Voltage (AVDD) 2.7 V to 5.25 V —
Digital Supply Voltage (DVDD) 2.7 V to 5.25 V —
Excitation Current Sources 3 switchable, software-selectable (typ. 10 µA / 200 µA / 1 mA) —
50/60 Hz Rejection Simultaneous, at 20 Hz update rate —
Output Update Rate 20 Hz (10 Hz, 25 Hz also programmable) —
On-chip Calibration Self-calibration and system calibration registers Self-cal, system-cal, background-cal
Digital I/O 4-bit GPIO port —
Low-Side Power Switches Yes, internal FET switches for sensor power gating —
Power Dissipation [DATA_NEEDED: power dissipation value] 1 mW typical
Plage de température de fonctionnement -40 °C to +85 °C (industrial) —
Boîtier 24-TSSOP (4.40 mm body width) 20-SOIC (Wide body)
Type de montage Surface Mount Surface Mount
Packaging Tape & Reel (TR) —
Niveau MSL [DATA_NEEDED: MSL level] —
Statut RoHS Compliant Compliant
Résolution — 16 bits
Number of Channels — 3 (2 fully differential / pseudo-differential via MUX)
Plage de tension d'entrée — ±10 V (after on-chip attenuation)
Supply Voltage (Analog) — 3 V / 5 V
Accuracy — ±0.003%
Missing Codes — None (16-bit guaranteed)
Gain Range — 1 to 128 (programmable)
Output Interface — Serial (SPI / DSP compatible)
Reference Input — Differential (REFIN+, REFIN-)

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis