AD7863AR-10REEL vs AD7862AR-10 Comparaison
Comparaison détaillée côte à côte de AD7863AR-10REEL par Analog Devices et AD7862AR-10 par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
AD7863AR-10REEL - Dual 175 kSPS 14-Bit Simultaneous-Sampling ADC | Analog Devices
AD7863AR-10REEL ✓ ActifComparaison des spécifications
| Paramètre | AD7863AR-10REEL | AD7862AR-10 |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | ADC/DAC | ADC/DAC |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $13,95 | $12,35 |
| Résolution | 14 bits | 12 bits |
| Number of Channels | 4 analog inputs grouped into 2 simultaneous-sampling channels | — |
| Sampling Rate (per channel) | 175 kSPS | — |
| Conversion Time | 5.2 us | 4 microseconds |
| ADC Architecture | SAR (Successive Approximation), 2 ADCs with track/hold | — |
| Input Range | ±10 V (or ±2.5 V with -10 range option) | — |
| Tension d'alimentation | Single 5 V | +5 V single supply |
| Internal Reference | 2.5 V (on-chip, with 0.1 uF bypass caps) | +2.5 V |
| Data Interface | Parallel (14-bit) | — |
| Input Channels | 4 (2 per ADC, channel selected by A0) | 4 (2 channels x 2 inputs) |
| Simultaneous Sampling | Yes (single CONVST triggers both ADCs) | — |
| Boîtier | 28-SOIC (0.295 inch, 7.50 mm width) | 28-pin SOIC (R-28) wide body |
| Type de montage | Surface Mount | Surface Mount |
| Température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Statut RoHS | [DATA_NEEDED: RoHS compliance] | Compliant |
| Process Technology | LC2MOS (linear-compatible CMOS) | — |
| Packaging | Tape & Reel (REEL) | — |
| Part Number | — | AD7862AR-10 |
| Number of ADCs | — | 2 |
| Conversion Rate (Throughput) | — | 250 kSPS per channel |
| Plage de tension d'entrée | — | ±10 V (AD7862-10) |
| Analog Input Type | — | Single-ended, true bipolar |
| Supply Current (typ) | — | 12 mA (60 mW) |
| Architecture | — | SAR (Successive Approximation) |
| Aperture Delay Matching | — | Tight (matched between two ADCs) |
| Interface | — | High-speed parallel |
| Integral Nonlinearity (INL) | — | ±1 LSB max (typical) / ±0.5 LSB (B-grade) |
| Signal-to-Noise Ratio (SNR) | — | 70 dB typical |
| Common-Mode Rejection | — | 80 dB typical at 50 kHz |
| Power Dissipation | — | 60 mW typical |
| Plage de température de fonctionnement | — | -40 °C to +85 °C |
| Channel Selection | — | A0 logic input |
| Track-and-Hold | — | Yes, two integrated T/H amplifiers |