AD7863AR-3REEL vs AD7862AR-10 Comparaison
Comparaison détaillée côte à côte de AD7863AR-3REEL par Analog Devices et AD7862AR-10 par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | AD7863AR-3REEL | AD7862AR-10 |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | ADC/DAC | ADC/DAC |
| Statut du cycle de vie | Obsolete | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $10,40 | $12,35 |
| Résolution | 14 bit | 12 bits |
| Number of Channels | 4 (2 ADC cores x 2 input ranges) | — |
| Fréquence d'échantillonnage | 175 kSPS per channel | — |
| Conversion Time | 5.2 us per channel | 4 microseconds |
| Architecture | SAR (Successive Approximation) | SAR (Successive Approximation) |
| Input Range (Variant -3) | +/-10 V or +/-2.5 V bipolar, software selectable | — |
| Data Interface | Parallel | — |
| Tension d'alimentation | 5 V single supply | +5 V single supply |
| Internal Reference | 2.5 V | +2.5 V |
| Integral Nonlinearity (INL) | [DATA_NEEDED: INL max value] | ±1 LSB max (typical) / ±0.5 LSB (B-grade) |
| Température de fonctionnement | -40C to +85C | — |
| Boîtier | 28-SOIC (0.295 inch / 7.50 mm width, wide-body) | 28-pin SOIC (R-28) wide body |
| Type de montage | Surface Mount | Surface Mount |
| Packaging | Tape and Reel (TR) | — |
| Statut RoHS | [DATA_NEEDED: RoHS compliance status] | Compliant |
| Process Technology | LC2MOS (linear compatible CMOS) | — |
| Power Consumption | [DATA_NEEDED: typical mW value] | — |
| Part Number | — | AD7862AR-10 |
| Number of ADCs | — | 2 |
| Conversion Rate (Throughput) | — | 250 kSPS per channel |
| Input Channels | — | 4 (2 channels x 2 inputs) |
| Plage de tension d'entrée | — | ±10 V (AD7862-10) |
| Analog Input Type | — | Single-ended, true bipolar |
| Supply Current (typ) | — | 12 mA (60 mW) |
| Aperture Delay Matching | — | Tight (matched between two ADCs) |
| Interface | — | High-speed parallel |
| Signal-to-Noise Ratio (SNR) | — | 70 dB typical |
| Common-Mode Rejection | — | 80 dB typical at 50 kHz |
| Power Dissipation | — | 60 mW typical |
| Plage de température de fonctionnement | — | -40 °C to +85 °C |
| Channel Selection | — | A0 logic input |
| Track-and-Hold | — | Yes, two integrated T/H amplifiers |