AD8227ARZ-RL7 vs INA128UA Comparaison

Comparaison détaillée côte à côte de AD8227ARZ-RL7 par Analog Devices et INA128UA par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Analog Devices
AD8227ARZ-RL7 AD8227ARZ-RL7 - Wide Supply In-Amp | Analog Devices

AD8227ARZ-RL7 - Wide Supply In-Amp | Analog Devices

AD8227ARZ-RL7 ✓ Actif
Texas Instruments
INA128UA INA128UA - 130dB CMRR Low-Power Instrumentation Amplifier

INA128UA - 130dB CMRR Low-Power Instrumentation Amplifier

INA128UA ✓ Actif

Comparaison des spécifications

Paramètre AD8227ARZ-RL7 INA128UA
Marque Analog Devices Texas Instruments
Catégorie Amplifier ICs Amplifier ICs
Statut du cycle de vie Actif Actif
Product Type Instrumentation Amplifier Precision low-power instrumentation amplifier
Number of Channels 1 1 channel
Gain Range 5 to 1000 (set by one external resistor) 1 to 10,000 V/V
Dual Supply Voltage Range ±1.5 V to ±18 V —
Single Supply Voltage Range 2.2 V to 36 V —
Type de sortie Rail-to-Rail —
Input Common-Mode Range Includes below negative supply —
Input Bias Current (A Grade, typ) 27 nA —
Input Bias Current (B Grade, typ) 20 nA —
REF Pin Protection ESD diodes; must not exceed ±VS by more than 0.3 V —
Boîtier 8-SOIC (SOIC-8) 8-pin SOIC, 3.90 mm width
Type de montage Surface Mount Surface mount
Packaging Tape & Reel (RL7) —
Statut RoHS unknown Compliant
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] -40 degC to +85 degC
Courant de repos [DATA_NEEDED: quiescent current] 700 uA
CMRR [DATA_NEEDED: CMRR at gain] —
Common-Mode Rejection Ratio — 130 dB
Minimum Common-Mode Rejection Ratio — 120 dB
Maximum Offset Voltage — 50 uV
Maximum Offset Voltage Drift — 0.5 uV/degC
Maximum Input Bias Current — 5 nA
Gain-Bandwidth Product — 1.3 MHz
Bandwidth at Gain 100 — 200 kHz
Input Protection Range — -40 V to +40 V
Supply Voltage Range — -18 V to +18 V
Minimum Dual Supply Voltage — -2.25 V to +2.25 V
Architecture — Three-op-amp instrumentation amplifier with current-feedback input circuitry

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis