AD9631AN vs AD9632AN Comparaison
Comparaison détaillée côte à côte de AD9631AN par Analog Devices et AD9632AN par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | AD9631AN | AD9632AN |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Amplifier Type | Voltage-feedback operational amplifier | — |
| Small-Signal Bandwidth | 320 MHz | 320 MHz |
| Large-Signal Bandwidth | 250 MHz | 250 MHz |
| Stable Gain | +1 | — |
| Typical Phase Margin | 65 degrees | — |
| Supply Voltage Range | ±6 V | [DATA_NEEDED: supply voltage range] |
| Total Supply Voltage | 12 V | — |
| Boîtier | 8-pin PDIP | 8-pin PDIP (N) |
| Nombre de broches | 8 pins | 8 pins |
| Type de montage | Through-hole | Through-hole |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | [DATA_NEEDED: slew rate] |
| Settling Time | [DATA_NEEDED: settling time] | — |
| Output Drive Capability | [DATA_NEEDED: output drive capability] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Noise Figure | [DATA_NEEDED: noise figure] | — |
| Total Harmonic Distortion | [DATA_NEEDED: total harmonic distortion] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Production Status | Production | — |
| Product Type | — | Voltage-feedback operational amplifier |
| Amplifier Architecture | — | Voltage feedback |
| Minimum Stable Gain | — | 2 |
| Gain Stability | — | Stable at gains of 2 or greater |
| Distortion Characteristic | — | Ultralow distortion |
| Circuit Count | — | 1 circuit |
| Related Unity-Gain-Stable Family Member | — | AD9631 |
| Predecessor Family | — | AD9621 and AD9622 |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Swing Range | — | [DATA_NEEDED: output swing range] |
| Output Current | — | [DATA_NEEDED: output current] |
| Densité de bruit | — | [DATA_NEEDED: noise density] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |