AD974BNZ vs AD974ANZ Comparaison

Comparaison détaillée côte à côte de AD974BNZ par Analog Devices et AD974ANZ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Analog Devices
AD974ANZ AD974ANZ - 4-Ch 16-Bit 200 kSPS ADC | Analog Devices

AD974ANZ - 4-Ch 16-Bit 200 kSPS ADC | Analog Devices

AD974ANZ ✓ Actif

Comparaison des spécifications

Paramètre AD974BNZ AD974ANZ
Marque Analog Devices Analog Devices
Catégorie ADC/DAC ADC/DAC
Statut du cycle de vie Actif Actif
Product Type 4-channel data acquisition system with serial interface Data acquisition system with ADC
ADC Resolution 16 bit 16 bit
Sampling Throughput 200 kSPS —
Number of Analog Input Channels 4 single-ended channels —
Input Multiplexer 4-channel analog input multiplexer 4-channel analog input multiplexer
ADC Architecture Successive-approximation switched-capacitor ADC Successive-approximation switched-capacitor ADC
Internal Reference +2.5 V —
Tension d'alimentation +5 V 5 V
Supported Input Range 1 0 V to +4 V —
Supported Input Range 2 0 V to +5 V —
Supported Input Range 3 ±10 V —
Digital Interface High-speed serial interface Serial interface
Maximum Power Dissipation 120 mW 120 mW
Power-Down Mode Yes —
Type de montage Through hole Through-hole
Boîtier 28-pin PDIP, 0.600 inch (15.24 mm) 28-PDIP, 0.600 in (15.24 mm)
Statut RoHS RoHS compliant RoHS compliant
Lead-Free Status Lead free Lead-free
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Fréquence d'échantillonnage — 200 kSPS
Input Channels — 4 single-ended channels
Analog Input Ranges — 0 V to +4 V, 0 V to +5 V, or ±10 V
Minimum Supply Voltage — 4.75 V
Maximum Supply Voltage — 5.25 V
Internal Reference Voltage — +2.5 V
Power-Down Typical Power — 50 μW
Active Power Consumption — 100 mW maximum
Input Resistance — [DATA_NEEDED: input resistance]
Integral Nonlinearity — [DATA_NEEDED: integral nonlinearity]
SNR — [DATA_NEEDED: signal-to-noise ratio]
ENOB — [DATA_NEEDED: effective number of bits]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis