ADC12138CIMSA vs ADC12132CIMSA Comparaison
Comparaison détaillée côte à côte de ADC12138CIMSA par Texas Instruments et ADC12132CIMSA par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | ADC12138CIMSA | ADC12132CIMSA |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | ADC/DAC | ADC/DAC |
| Statut du cycle de vie | NRND | NRND |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $5,72 | $4,10 |
| Résolution | 12-bit plus sign (13-bit dynamic range) | 12 bit + sign |
| Number of Input Channels | 8 single-ended / 4 differential (plus COM) | 2 single-ended / 1 differential |
| Conversion Architecture | SAR (Successive Approximation) | — |
| Input MUX | 8-channel analog multiplexer | — |
| Sample/Hold | On-chip input sample-and-hold | — |
| Interface | Serial (SPI/QSPI/MICROWIRE-compatible) | — |
| Self-Calibration | On-chip auto-calibration (offset + linearity) | On-chip, on power-up or on command |
| Analog Supply Voltage | 3.0 V to 5.5 V (single supply) | 3 V to 5.5 V |
| Digital Supply Voltage | Same as AVDD | 3 V to 5.5 V (shared with analog) |
| Température de fonctionnement | -40 °C to +85 °C (industrial) | -40 C to +85 C |
| Boîtier | 28-pin SSOP (MSA) | 20-pin SSOP (5.30 mm body width) |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | [DATA_NEEDED: MSL level] | [DATA_NEEDED: MSL rating] |
| Statut RoHS | Non-RoHS (original); NOPB suffix is RoHS-compliant | Compliant (per TI product page) |
| Daisy-Chain Support | Yes (multi-device serial bus) | — |
| Architecture | — | SAR (Successive Approximation Register) |
| Sampling Rate (Max) | — | 114 ksps |
| Input Type | — | Single-ended or differential with MUX |
| Data Interface | — | NSC MICROWIRE / SPI-compatible serial |
| Integral Non-Linearity (INL) | — | ±1 LSB (max) |
| Differential Non-Linearity (DNL) | — | [DATA_NEEDED: DNL max] |
| Signal-to-Noise + Distortion (SINAD) | — | [DATA_NEEDED: SINAD min] |
| Effective Number of Bits (ENOB) | — | [DATA_NEEDED: ENOB] |
| Power Consumption | — | approx. 6 mW at 5 V |
| Input Bandwidth | — | [DATA_NEEDED: input bandwidth] |
| Tension de référence | — | External 2.5 V to VDD |
| Lead-Free | — | Yes |