ADF4212LBRUZ-RL vs ADF4213BRU-REEL Comparaison
Comparaison détaillée côte à côte de ADF4212LBRUZ-RL par Analog Devices et ADF4213BRU-REEL par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
ADF4212LBRUZ-RL - 2.4GHz Dual PLL Synthesizer | Analog Devices
ADF4212LBRUZ-RL ✓ ActifAnalog Devices
ADF4213BRU-REEL - 3 GHz PLL Frequency Synthesizer | Analog Devices
ADF4213BRU-REEL ✓ ActifComparaison des spécifications
| Paramètre | ADF4212LBRUZ-RL | ADF4213BRU-REEL |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Clock & Timing | Clock & Timing |
| Statut du cycle de vie | Actif | Actif |
| Device Type | Dual RF/IF PLL frequency synthesizer | — |
| Maximum RF Input Frequency | 2.4 GHz | — |
| Maximum IF Input Frequency | 1.0 GHz | — |
| Supply Voltage Range | 2.7 V to 5.5 V | — |
| Architecture | Dual phase-locked loop | — |
| RF/IF Prescaler Ratios | 8/9, 16/17, 32/33, and 64/65 | — |
| Charge Pump Current | Programmable | — |
| Reference Counter | 15-bit programmable R counter | — |
| Serial Control Interface | 3-wire | — |
| Lock Detection | Analog and digital | — |
| Fastlock Mode | Supported | — |
| Power-Down Mode | Supported | — |
| Charge Pump Supply | Separate VP supply | Separate VP supply |
| Total IDD | 7.5 mA | — |
| Boîtier | 20-pin TSSOP, 0.173 in (4.40 mm) width | 20-TSSOP, 4.40 mm width |
| Type de montage | Surface mount | Surface mount |
| Temperature Grade | Industrial | Industrial grade |
| Statut RoHS | Compliant | Unknown |
| Reference Input Frequency | [DATA_NEEDED: reference input frequency] | — |
| Output Tuning Voltage Range | [DATA_NEEDED: output tuning voltage range] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Product Type | — | Clock/frequency synthesizer IC |
| PLL Architecture | — | 1 PLL |
| Maximum Output Frequency | — | 3 GHz |
| Minimum Output Frequency | — | 0 MHz |
| Tension d'alimentation de fonctionnement | — | 2.7 V to 5.5 V |
| Input Signal Type | — | CMOS |
| Output Signal Type | — | Clock |
| Phase Detector Input | — | Differential |
| Maximum Input-to-Output Ratio | — | 3:1 |
| Number of Circuits | — | 1 circuit |
| Terminal Count | — | 20 terminals |
| Packaging | — | Tape and reel |
| REACH Status | — | Unknown |
| AEC-Q100 Qualification | — | Not applicable |