ADM202EAN vs MAX232EPE Comparaison
Comparaison détaillée côte à côte de ADM202EAN par Analog Devices et MAX232EPE par Maxim Integrated. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
ADM202EAN - Dual RS-232 Driver/Receiver, 5V, 16-PDIP | Analog Devices
ADM202EAN ✓ ActifMaxim Integrated
MAX232EPE+ - +5V RS-232 Transceiver, 2/2, 16-PDIP | Maxim Integrated
MAX232EPE ✓ ActifComparaison des spécifications
| Paramètre | ADM202EAN | MAX232EPE |
|---|---|---|
| Marque | Analog Devices | Maxim Integrated |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Number of Channels | 2 channels | — |
| Type d'interface | RS-232 line driver/receiver | — |
| Tension d'alimentation | 5 V | 4.5 V to 5.5 V (single +5V supply) |
| Débit de données | 230 kbit/s | 120 kbps (typical) |
| RS-232 Output Levels | ±10 V | — |
| Charge-Pump Capacitor Value | 0.1 µF minimum | — |
| RS-232 Compliance | TIA/EIA-232-E and V.28 | — |
| ESD Protection, Contact | 8 kV | — |
| ESD Protection, Air Gap | 15 kV | — |
| ESD Protection, Human Body Model | 15 kV | — |
| EMC Directive | 89/336/EEC | — |
| Fast Transient Burst Immunity | IEC 61000-4-4 | — |
| EMI Emissions Reference | EN 55022 | — |
| Boîtier | 16-pin PDIP | 16-PDIP (Plastic DIP, 0.300 inch / 7.62 mm) |
| Type de montage | Through-hole | Through-Hole |
| Supply Configuration | Single 5 V supply | — |
| Driver Slew Rate | [DATA_NEEDED: driver slew rate] | — |
| Receiver Propagation Delay | [DATA_NEEDED: receiver propagation delay] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant (lead-free + indicates lead-free finish) |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Product Type | — | RS-232 Transceiver (Driver/Receiver) |
| Drivers / Receivers | — | 2 / 2 |
| RS-232 Output Voltage | — | ±10 V (typical, generated internally by charge pump) |
| Température de fonctionnement | — | -40 C to +85 C (extended industrial) |
| External Charge-Pump Capacitors | — | 4 x 1 uF (typical, tantalum or ceramic) |
| ESD Protection | — | ±15 kV HBM on RS-232 pins (per Maxim datasheet family) |
| Receiver Input Levels | — | ±30 V tolerant |
| Standards Compliance | — | EIA/TIA-232E, V.28, V.24 |
| Niveau MSL | — | 1 (unlimited) |
| Nombre de broches | — | 16 |