ADM238LANZ vs ADM208ANZ Comparaison
Comparaison détaillée côte à côte de ADM238LANZ par Analog Devices et ADM208ANZ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | ADM238LANZ | ADM208ANZ |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | RS-232 transceiver | — |
| Driver Count | 4 drivers | — |
| Receiver Count | 4 receivers | — |
| Tension d'alimentation | 5 V | 4.5 V to 5.5 V |
| Maximum Data Rate | 120 kbps | 200 kbps |
| Interface Standards | EIA-232-E and V.28 | — |
| Driver Output Swing | approximately ±9 V from a 5 V supply | — |
| Charge-Pump Capacitor | 1 μF | — |
| Shutdown Supply Current | ≤1 μA | — |
| Receiver Input Voltage Tolerance | ±30 V | — |
| Latch-Up Protection | Latch-up free | — |
| Boîtier | 24-pin plastic DIP | 24-pin PDIP, 0.300 inch (7.62 mm) pitch |
| Type de montage | Through-hole | Through-hole |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Driver / Receiver Configuration | — | 4 / 4 |
| Transceiver Type | — | Full RS-232 |
| Nominal Supply Voltage | — | +5 V |
| Charge-Pump Capacitor Value | — | 0.1 µF |
| On-Board DC-to-DC Output Swing | — | ±9 V |
| Nombre de broches | — | 24 pins |
| Température de fonctionnement | — | -40°C to +85°C |
| Temperature Grade | — | Industrial |
| Packaging | — | Tube |
| Lead-Free Status | — | Lead-free |
| Protocol | — | RS-232 |
| Logic Technology | — | CMOS |
| Number of Drivers | — | 4 |
| Number of Receivers | — | 4 |
| RS-232 Output Level | — | Approximately ±9 V |
| Product Family | — | ADM208 |