ADM2461EBRWZ-RL vs ADM2567EBRNZ Comparaison
Comparaison détaillée côte à côte de ADM2461EBRWZ-RL par Analog Devices et ADM2567EBRNZ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
ADM2461EBRWZ-RL - 500kbps Isolated RS-485/RS-422 Transceiver | ADI
ADM2461EBRWZ-RL ✓ ActifAnalog Devices
ADM2567EBRNZ - 3 kV Isolated RS-485 Transceiver, 25 Mbps | Analog Devices
ADM2567EBRNZ ✓ ActifComparaison des spécifications
| Paramètre | ADM2461EBRWZ-RL | ADM2567EBRNZ |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $4,10 | $13,84 |
| Product Type | Isolated RS-485 / RS-422 Transceiver | — |
| Protocol | RS-422, RS-485 | RS-422 / RS-485 |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half Duplex | — |
| Maximum Data Rate | 500 kbps | — |
| Isolation Voltage (rms) | 5.7 kV rms | — |
| ESD Protection (Bus Pins) | ±15 kV IEC (HBM:Human Body Model per IEC 61000-4-2) | — |
| Receiver Hysteresis | 30 mV typical | — |
| Unit Load | 1/8 (up to 256 nodes) | — |
| Supply Voltage - Logic Side (VDD1) | 3.0 V to 5.5 V | — |
| Supply Voltage - Bus Side (VDD2) | 3.0 V to 5.5 V (isolated, supplied by internal DC-DC driver) | — |
| Common-Mode Voltage Range | -25 V to +25 V | — |
| Température de fonctionnement | -40C to +85C | — |
| Boîtier | 16-SOIC_W (Wide Body, 7.5 mm creepage) | 28-pin SOIC-W (0.295", 7.50 mm body width) |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | 3 | — |
| Statut RoHS | Compliant | Compliant |
| Isolation Voltage | — | 3000 V rms |
| Data Rate (max) | — | 25 Mbps |
| Number of Channels | — | 4 (signal isolation) |
| Common-Mode Transient Immunity (CMTI) | — | 250 kV/us |
| Bus ESD (IEC 61000-4-2, contact) | — | ±15 kV (bus pins) |
| Bus ESD (IEC 61000-4-2, air) | — | ±15 kV |
| A/B/Y/Z ESD (IEC 61000-4-2, contact) | — | ±6 kV |
| Logic-Side Supply (VIO) | — | 1.7 V to 5.5 V |
| Integrated Isolated DC-DC | — | Yes (isoPower) |
| Plage de température de fonctionnement | — | [DATA_NEEDED: Operating temperature range] |
| Compliance | — | ANSI/TIA/EIA-485-A-98, ISO 8482:1987 (E) |
| Number of Drivers / Receivers | — | 1 / 1 |