ADM2561EBRNZ vs ADM2461EBRWZ-RL Comparaison
Comparaison détaillée côte à côte de ADM2561EBRNZ par Analog Devices et ADM2461EBRWZ-RL par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
ADM2461EBRWZ-RL - 500kbps Isolated RS-485/RS-422 Transceiver | ADI
ADM2461EBRWZ-RL ✓ ActifComparaison des spécifications
| Paramètre | ADM2561EBRNZ | ADM2461EBRWZ-RL |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $6,78 | $4,10 |
| Fonction | Isolated RS-485/RS-422 transceiver (full- and half-duplex) with integrated isolated DC-DC converter | — |
| Protocol | RS-422, RS-485 (TIA/EIA-485-A, ISO 8482:1987) | RS-422, RS-485 |
| Number of Drivers/Receivers | 2/2 | 1/1 |
| Duplex | Full / Half | Half Duplex |
| Débit de données | 25 Mbps | — |
| Isolation Voltage (RMS, 60s) | 3 kV | — |
| ESD Protection (bus pins, IEC 61000-4-2) | ±15 kV | — |
| Unit Load | 1/8 unit load (up to 256 nodes on bus) | 1/8 (up to 256 nodes) |
| Supply Voltage (logic side) | 3.0 V to 5.5 V | — |
| Integrated Isolated DC-DC | Yes (isoPower) | — |
| Hot-Swap Tolerant | Yes | — |
| Plage de température de fonctionnement | -40C to +105C | — |
| Boîtier | 28-pin SOIC-W-FP (wide-body SOIC with exposed pad) | 16-SOIC_W (Wide Body, 7.5 mm creepage) |
| Type de montage | Surface Mount | Surface Mount |
| Statut RoHS | Compliant | Compliant |
| Safety / Regulatory | UL 1577 basic insulation; IEC 61000-4-2 ESD; 8 mm creepage/clearance on PCB | — |
| Product Type | — | Isolated RS-485 / RS-422 Transceiver |
| Maximum Data Rate | — | 500 kbps |
| Isolation Voltage (rms) | — | 5.7 kV rms |
| ESD Protection (Bus Pins) | — | ±15 kV IEC (HBM:Human Body Model per IEC 61000-4-2) |
| Receiver Hysteresis | — | 30 mV typical |
| Supply Voltage - Logic Side (VDD1) | — | 3.0 V to 5.5 V |
| Supply Voltage - Bus Side (VDD2) | — | 3.0 V to 5.5 V (isolated, supplied by internal DC-DC driver) |
| Common-Mode Voltage Range | — | -25 V to +25 V |
| Température de fonctionnement | — | -40C to +85C |
| Niveau MSL | — | 3 |