ADM2565EBRNZ-RL7 vs ADM2461EBRWZ-RL Comparaison
Comparaison détaillée côte à côte de ADM2565EBRNZ-RL7 par Analog Devices et ADM2461EBRWZ-RL par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
ADM2565EBRNZ-RL7 - 3kV Isolated RS-485 Transceiver, 25Mbps | ADI
ADM2565EBRNZ-RL7 ✓ ActifAnalog Devices
ADM2461EBRWZ-RL - 500kbps Isolated RS-485/RS-422 Transceiver | ADI
ADM2461EBRWZ-RL ✓ ActifComparaison des spécifications
| Paramètre | ADM2565EBRNZ-RL7 | ADM2461EBRWZ-RL |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $8,74 | $4,10 |
| Fonction | Signal and power isolated RS-485 transceiver (half-duplex) | — |
| Débit de données | 25 Mbps (max) | — |
| Isolation Voltage | 3 kV rms | — |
| CMTI | 250 kV/us | — |
| Bus ESD Protection | +/-15 kV IEC 61000-4-2 air discharge | — |
| Standards Compliance | ANSI/TIA/EIA-485-A-98; ISO 8482:1987 (E) | — |
| Number of Nodes / Unit Loads | [DATA_NEEDED: number of nodes supported] | — |
| Integrated Isolated Supply | Yes (isoPower DC-DC converter) | — |
| Canaux | 4 (per DigiKey categorization) | — |
| Boîtier | 28-BSSOP wide-body SOIC_W_FP, 10.15 mm x 10.05 mm | 16-SOIC_W (Wide Body, 7.5 mm creepage) |
| Type de montage | Surface Mount | Surface Mount |
| Température de fonctionnement | [DATA_NEEDED: operating temperature range] | -40C to +85C |
| Logic Supply Voltage | [DATA_NEEDED: VDD1 logic supply range] | — |
| Bus Supply Voltage | [DATA_NEEDED: VDD2 bus-side supply range] | — |
| Statut RoHS | Compliant | Compliant |
| Niveau MSL | [DATA_NEEDED: MSL rating] | 3 |
| Lead-Free | Yes | — |
| Product Type | — | Isolated RS-485 / RS-422 Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half Duplex |
| Maximum Data Rate | — | 500 kbps |
| Isolation Voltage (rms) | — | 5.7 kV rms |
| ESD Protection (Bus Pins) | — | ±15 kV IEC (HBM:Human Body Model per IEC 61000-4-2) |
| Receiver Hysteresis | — | 30 mV typical |
| Unit Load | — | 1/8 (up to 256 nodes) |
| Supply Voltage - Logic Side (VDD1) | — | 3.0 V to 5.5 V |
| Supply Voltage - Bus Side (VDD2) | — | 3.0 V to 5.5 V (isolated, supplied by internal DC-DC driver) |
| Common-Mode Voltage Range | — | -25 V to +25 V |