ADM2567EBRNZ vs MAX14882AWE+T Comparaison
Comparaison détaillée côte à côte de ADM2567EBRNZ par Analog Devices et MAX14882AWE+T par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
ADM2567EBRNZ - 3 kV Isolated RS-485 Transceiver, 25 Mbps | Analog Devices
ADM2567EBRNZ ✓ ActifAnalog Devices
MAX14882AWE+T - 5kVRMS Isolated CAN Transceiver | Analog Devices
MAX14882AWE+T ✓ ActifComparaison des spécifications
| Paramètre | ADM2567EBRNZ | MAX14882AWE+T |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $13,84 | $6,21 |
| Isolation Voltage | 3000 V rms | 5 kVRMS |
| Data Rate (max) | 25 Mbps | — |
| Number of Channels | 4 (signal isolation) | — |
| Common-Mode Transient Immunity (CMTI) | 250 kV/us | — |
| Bus ESD (IEC 61000-4-2, contact) | ±15 kV (bus pins) | — |
| Bus ESD (IEC 61000-4-2, air) | ±15 kV | — |
| A/B/Y/Z ESD (IEC 61000-4-2, contact) | ±6 kV | — |
| Protocol | RS-422 / RS-485 | — |
| Logic-Side Supply (VIO) | 1.7 V to 5.5 V | — |
| Integrated Isolated DC-DC | Yes (isoPower) | — |
| Boîtier | 28-pin SOIC-W (0.295", 7.50 mm body width) | 16-pin Wide-body SOIC (W SOIC) |
| Plage de température de fonctionnement | [DATA_NEEDED: Operating temperature range] | -40 C to +125 C |
| Compliance | ANSI/TIA/EIA-485-A-98, ISO 8482:1987 (E) | — |
| Statut RoHS | Compliant | Compliant |
| Type de montage | Surface Mount | Surface Mount |
| Number of Drivers / Receivers | 1 / 1 | — |
| Fonction | — | Isolated high-speed CAN transceiver |
| Débit de données | — | 1 Mbps |
| Controller-side Supply (VDDA) | — | 3.0 V to 5.5 V |
| Bus-side Supply (VDDB) | — | 4.5 V to 5.5 V |
| Receiver Input Common-Mode Range | — | -25 V to +25 V |
| Bus Fault Tolerance (CANH/CANL) | — | +/-54 V |
| ESD Protection (Bus-side, HBM) | — | +/-15 kV |
| Integrated LDO Output Current | — | 300 mA (max), 130 mA to internal load |
| Number of Drivers/Receivers | — | 1/1 (Half-Duplex CAN) |
| Creepage and Clearance | — | 8 mm |
| Standard | — | ISO 11898-2 compliant CAN |