ADM2865EBRNZ vs ADM2867EBRNZ Comparaison
Comparaison détaillée côte à côte de ADM2865EBRNZ par Analog Devices et ADM2867EBRNZ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
ADM2867EBRNZ - 5.7kV Isolated RS-485 Transceiver | Analog Devices
ADM2867EBRNZ ✓ ActifComparaison des spécifications
| Paramètre | ADM2865EBRNZ | ADM2867EBRNZ |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $6,12 | $12,60 |
| Fonction | Isolated RS-485 Transceiver with Integrated Isolated Power | Isolated RS-485 transceiver (1/1, full-duplex) |
| Protocol | RS-422, RS-485 | — |
| Isolation Voltage (rms) | 5.7 kV | — |
| Number of Channels | 4 | — |
| Maximum Data Rate | 25 Mbps | — |
| Common-Mode Transient Immunity (CMTI) | 250 kV/µs | — |
| ESD Protection (IEC) | ±15 kV on bus pins | — |
| Supply Voltage (Logic Side) | 3 V to 5.5 V | — |
| Isolated Output Voltage | 3.3 V or 5 V (LDO-regulated) | — |
| Standards Compliance | ANSI/TIA/EIA-485-A-98; ISO 8482:1987(E) | ANSI/TIA/EIA-485-A-98; ISO 8482:1987 (E) |
| Température de fonctionnement | -40°C to +85°C (industrial) | -40 °C to +85 °C |
| Boîtier | 28-BSSOP (0.295", 7.50 mm Width) | 28-SOIC-W-FP (wide-body SOIC with exposed pad) |
| Type de montage | Surface Mount | Surface Mount |
| Technology | iCoupler (transformer-based digital isolation) | — |
| Statut RoHS | Compliant | — |
| Data Rate (max) | — | 25 Mbps |
| Isolation Voltage (RMS) | — | 5.7 kV |
| ESD Protection (bus pins) | — | ±15 kV IEC 61000-4-2 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex Mode | — | Full |
| Receiver Hysteresis | — | 30 mV |
| Supply Voltage (VCC/VIO) | — | 3.0 V to 5.5 V |
| Creepage/Clearance | — | >8.0 mm |
| Integrated isoPower DC-DC | — | Yes (no external isolated supply needed) |
| Radiated Emissions | — | EN 55032 Class B on 2-layer PCB |
| Niveau MSL | — | [DATA_NEEDED: MSL rating] |
| Lead-Free / RoHS | — | Yes (compliant) |