ATM90E36A-AU-R vs ATM90E36A-AU Comparaison
Comparaison détaillée côte à côte de ATM90E36A-AU-R par Microchip Technology et ATM90E36A-AU par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
ATM90E36A-AU-R - 3-Phase Energy Meter AFE | Microchip | 48-TQFP
ATM90E36A-AU-R ✓ ActifMicrochip Technology
ATM90E36A-AU - 3-Phase Energy Metering AFE, 48-TQFP | Microchip
ATM90E36A-AU ✓ ActifComparaison des spécifications
| Paramètre | ATM90E36A-AU-R | ATM90E36A-AU |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Energy Metering) | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $4,95 | $2,52 |
| Fonction | 3-Phase Energy Metering Analog Front End (AFE) | — |
| Supported Topologies | 3P4W (Y0), 3P3W (Y or Delta) | — |
| Number of ADC Channels | 7 channels (24-bit sigma-delta) | — |
| ADC Resolution | 24-bit | 16-bit sigma-delta |
| Effective Number of Bits (ENOB) | >13 bits at 1 kHz | — |
| Active Energy Accuracy | 0.1% over 5000:1 dynamic range | 0.1% over 1000:1 dynamic range |
| Measurement Functions | Active, reactive, apparent energy; RMS voltage/current; harmonic/Fourier analysis | — |
| Tension d'alimentation | 1.8 V / 3 V (digital I/O 3.3 V typical) | — |
| Communication | SPI and UART serial interfaces | — |
| Boîtier | 48-pin TQFP (7x7 mm) | 48-pin TQFP, 7x7 mm body |
| Type de montage | Surface Mount | Surface Mount |
| Température de fonctionnement | -40C to +85C (Industrial) | — |
| Tamper Detection | Yes (built-in) | — |
| Built-in Temperature Sensor | Yes | — |
| Built-in Voltage Reference | Yes | — |
| Pulse Output | Configurable CF pulse outputs | — |
| Niveau MSL | 3 | 3 (per JEDEC J-STD-020) |
| Statut RoHS | Compliant | Compliant |
| Product Type | — | 3-Phase Energy Metering AFE IC |
| Metering Topology | — | 3P4W (Y0), 3P3W (Y or Δ) |
| Input Channels | — | 7 (3 voltage + 4 current) |
| Dynamic Range | — | 1000:1 |
| Analog Supply Voltage | — | 3.3 V (typical) |
| Digital I/O Supply | — | 3.3 V (1.8 V logic-compatible I/O per datasheet) |
| Current Consumption | — | [DATA_NEEDED: typical operating Iq] |
| Output Energy Registers | — | Active, Reactive, Apparent, Fundamental |
| CF Pulse Outputs | — | 3 (configurable for active/reactive/apparent) |
| Zero-Crossing Outputs | — | ZX0, ZX1, ZX2 |
| Interrupt Outputs | — | IRQ0, IRQ1, WarnOut |
| Serial Interface | — | SPI / UART (mode-selectable), up to 4 Mbps |
| Harmonic Analysis | — | Up to 21st order THD per phase |
| Temperature Compensation | — | On-chip |
| Plage de température de fonctionnement | — | -40C to +85C (Industrial, -AU suffix) |
| Lead-Free / Halogen-Free | — | Yes / [DATA_NEEDED: halogen-free status] |