ATMEGA162-16PI vs ATMEGA162-16PJ Comparaison

Comparaison détaillée côte à côte de ATMEGA162-16PI par Microchip Technology et ATMEGA162-16PJ par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Microchip Technology
ATMEGA162-16PI ATMEGA162-16PI - 16MHz AVR MCU, 16KB Flash, 40-PDIP | Microchip

ATMEGA162-16PI - 16MHz AVR MCU, 16KB Flash, 40-PDIP | Microchip

ATMEGA162-16PI ✓ Actif
Microchip Technology
ATMEGA162-16PJ ATMEGA162-16PJ - 16MHz AVR 8-Bit MCU 16KB Flash | Microchip

ATMEGA162-16PJ - 16MHz AVR 8-Bit MCU 16KB Flash | Microchip

ATMEGA162-16PJ ✓ Actif

Comparaison des spécifications

Paramètre ATMEGA162-16PI ATMEGA162-16PJ
Marque Microchip Technology Microchip Technology
Catégorie Microcontrollers Microcontrollers
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $3,55 $2,75
Core 8-bit AVR RISC —
Program Memory Size 16 KB Flash (8K x 16) —
SRAM Size 1 KB —
EEPROM Size 512 B —
Fréquence d'horloge maximale 16 MHz —
Maximum Throughput 16 MIPS at 16 MHz —
Tension d'alimentation de fonctionnement 4.5 V to 5.5 V —
Température de fonctionnement -40C to +85C (industrial, 'I' suffix) 0 C to +70 C (J suffix)
Boîtier 40-PDIP (0.600 in, 15.24 mm) 40-PDIP (0.600 in, 15.24 mm)
Type de montage Through Hole Through-Hole
USART Peripherals 2 —
Timers 2 x 8-bit, 1 x 16-bit 2 (8-bit and 16-bit)
PWM Channels 4 —
ADC Channels 8-channel 10-bit —
JTAG Interface Yes (on-chip debug and boundary scan) —
Instruction Set 131 instructions, most single-cycle 131 instructions, mostly single-cycle
In-System Programmable Yes (self-programming Flash) —
Core Architecture — 8-bit AVR RISC
Max CPU Frequency — 16 MHz
Flash Program Memory — 16 KB (8K x 16), self-programming
SRAM — 1 KB
EEPROM — 512 Bytes
Throughput — 16 MIPS at 16 MHz
Supply Voltage Range — 4.5 V to 5.5 V (16 MHz speed grade)
USARTs — 2 full-duplex
Debug Interface — JTAG for on-chip debug
Programming — ICSP in-circuit serial programming; boot loader support
General Purpose I/O — 32 I/O lines (PA, PB, PC, PD)
Niveau MSL — [DATA_NEEDED: moisture sensitivity level]
Statut RoHS — [DATA_NEEDED: RoHS status]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis