ATMEGA162L-8PI vs ATMEGA162V-1PC Comparaison

Comparaison détaillée côte à côte de ATMEGA162L-8PI par Microchip Technology et ATMEGA162V-1PC par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Microchip Technology
ATMEGA162L-8PI ATMEGA162L-8PI - 8MHz AVR 16KB Flash MCU DIP-40 | Microchip

ATMEGA162L-8PI - 8MHz AVR 16KB Flash MCU DIP-40 | Microchip

ATMEGA162L-8PI ✓ Actif
Microchip Technology
ATMEGA162V-1PC ATMEGA162V-1PC - 16KB Flash 8-Bit AVR MCU 40-DIP | Microchip

ATMEGA162V-1PC - 16KB Flash 8-Bit AVR MCU 40-DIP | Microchip

ATMEGA162V-1PC ✓ Actif

Comparaison des spécifications

Paramètre ATMEGA162L-8PI ATMEGA162V-1PC
Marque Microchip Technology Microchip Technology
Catégorie Microcontrollers Microcontrollers
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $3,10 $3,40
Core Architecture AVR 8-bit RISC AVR 8-bit RISC
Core Size 8-bit —
Fréquence d'horloge maximale 8 MHz 8 MHz
Flash Program Memory 16 KB (8K x 16) 16 KB
SRAM Data Memory 1 KB —
EEPROM 512 x 8 bytes 512 B
Supply Voltage Range 2.7 V to 5.5 V 1.8 V to 3.6 V
Instruction Set 133 powerful instructions, most single-cycle 131 instructions, most single-cycle
Working Registers 32 x 8-bit general purpose —
Package Type 40-PDIP (0.600 in, 15.24 mm) —
Style de montage Through Hole —
Operating Temperature Grade I = Industrial (-40C to +85C) —
Largeur du bus de données 8 bit —
Communication Interfaces 2x USART (dual UART), SPI, TWI —
Timers 8-bit and 16-bit timers with PWM —
Program Memory Type Flash (in-system self-programmable) —
Life Cycle Stage Active —
SRAM — 1 KB
Maximum Throughput — 8 MIPS at 8 MHz
General Purpose I/O — 35 I/O lines
JTAG Interface — Boundary-scan, on-chip debug, programming
Timers/Counters — 4 with compare modes
External Memory Interface — Yes
Temperature Grade — Commercial (0C to +70C)
Boîtier — 40-pin PDIP (DIP-40), through-hole
Type de montage — Through-Hole
Speed Grade — -1 (0 - 8 MHz at 1.8V - 3.6V)
Operating Voltage Class — Low-voltage (V) grade

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis