ATMEGA164PA-MCHR vs ATMEGA164A-MU Comparaison

Comparaison détaillée côte à côte de ATMEGA164PA-MCHR par Microchip Technology et ATMEGA164A-MU par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Microchip Technology
ATMEGA164PA-MCHR ATMEGA164PA-MCHR - 8-bit AVR MCU 16KB Flash 20MHz | Microchip

ATMEGA164PA-MCHR - 8-bit AVR MCU 16KB Flash 20MHz | Microchip

ATMEGA164PA-MCHR ✓ Actif
Microchip Technology
ATMEGA164A-MU ATMEGA164A-MU - 8-bit AVR MCU 16KB Flash 20MHz VQFN-44 | Microchip

ATMEGA164A-MU - 8-bit AVR MCU 16KB Flash 20MHz VQFN-44 | Microchip

ATMEGA164A-MU ✓ Actif

Comparaison des spécifications

Paramètre ATMEGA164PA-MCHR ATMEGA164A-MU
Marque Microchip Technology Microchip Technology
Catégorie Microcontrollers Microcontrollers
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $2,71 $3,01
Core Architecture AVR 8-bit RISC AVR 8-bit RISC
Core Size 8-Bit —
Fréquence d'horloge maximale 20 MHz 20 MHz
Flash Memory 16 KB (8K x 16) —
EEPROM 512 B 512 B
SRAM 1 KB 1 KB
Supply Voltage Range 2.7 V to 5.5 V 2.7 V to 5.5 V
General Purpose I/O Lines 32 —
USART Interfaces 2 —
Two-Wire Interface (TWI/I2C) 1 —
Timers/Counters 3 flexible timer/counters with compare modes and PWM —
ADC 8-channel 10-bit 10-bit ADC (per family datasheet)
Low Power Technology picoPower —
In-System Programming ISP flash with read-while-write —
Instructions 133 powerful instructions, most single-cycle —
Boîtier 44-VQFN (5x5 mm), exposed pad 44-VQFN (7x7 mm) with exposed pad
Type de montage Surface Mount Surface Mount
Température de fonctionnement [DATA_NEEDED: operating temperature range] -40C to +85C (industrial)
MSL Rating [DATA_NEEDED: moisture sensitivity level] —
Program Memory (FLASH) — 16 KB (8K x 16) ISP
Throughput — Up to 20 MIPS (approx. 1 MIPS per MHz)
Instruction Set — 133 powerful instructions, most single-cycle
General Purpose I/O — 32 I/O lines
General Purpose Registers — 32
Peripherals — Real-time counter, timers/PWM, WDT, brown-out detection
Programming Interface — ISP (In-System Programmable), read-while-write
Life Cycle Stage — Active

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis