ATMEGA329P-20AU vs ATMEGA329P-20AN Comparaison

Comparaison détaillée côte à côte de ATMEGA329P-20AU par Microchip Technology et ATMEGA329P-20AN par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Microchip Technology
ATMEGA329P-20AU ATMEGA329P-20AU - 20MHz 8-bit AVR MCU 32KB Flash TQFP-64

ATMEGA329P-20AU - 20MHz 8-bit AVR MCU 32KB Flash TQFP-64

ATMEGA329P-20AU ✓ Actif
Microchip Technology
ATMEGA329P-20AN ATMEGA329P-20AN - 8-bit AVR MCU 32KB Flash 64-TQFP | Microchip

ATMEGA329P-20AN - 8-bit AVR MCU 32KB Flash 64-TQFP | Microchip

ATMEGA329P-20AN ✓ Actif

Comparaison des spécifications

Paramètre ATMEGA329P-20AU ATMEGA329P-20AN
Marque Microchip Technology Microchip Technology
Catégorie Microcontrollers Microcontrollers
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $4,71 $2,95
Core Architecture AVR (8-bit RISC, Harvard) AVR 8-bit RISC
Instruction Set 131 instructions, mostly single-cycle 131 instructions, most single-cycle
Program Memory (Flash) 32 KB (16K x 16), In-System Programmable with RWW 32 KB
EEPROM 1 KB 1 KB
SRAM 2 KB (2K x 8) 2 KB
Maximum Clock Speed 20 MHz —
Throughput Up to 20 MIPS at 20 MHz —
Supply Voltage (Vcc) 2.7 V to 5.5 V (10 MHz max below 4.5 V; 20 MHz requires 4.5-5.5 V) 2.7 V to 5.5 V
General-Purpose I/O Pins 54 —
General-Purpose Working Registers 32 —
ADC 10-bit, up to 8 single-ended channels [DATA_NEEDED: ADC channels and resolution]
PWM Channels 6 —
Communication Peripherals 2x USART, 1x TWI (I2C), 1x SPI (also ISP) —
Debug Interface JTAG (IEEE 1149.1 compliant) —
Boîtier 64-pin TQFP (14x14 mm, 0.8 mm pitch) 64-pin TQFP (14x14 mm, 0.8 mm pitch)
Température de fonctionnement -40C to +85C (industrial, -A suffix) -40C to +105C
Type de montage Surface Mount Surface Mount
Statut RoHS Compliant (Pb-free / Green) Compliant (Green)
Power-Save Modes Idle, ADC Noise Reduction, Power-save, Power-down, Standby, Extended Standby (picoPower) —
QTouch Support Yes (peripheral touch controller via library) —
Maximum CPU Speed — 20 MHz (20 MIPS)
Number of I/O Pins — [DATA_NEEDED: total I/O pin count]
Communication Interfaces — SPI, UART/USART, USI
LCD Controller — Integrated (supports up to 4x25 segments)
Timers/Counters — 4 (with compare modes, PWM)
Power-Saving Modes — 6 software-selectable modes
In-System Programming — Yes (SPI-based ISP)

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis