ATMEGA329PV-10MNR vs ATMEGA329P-20AU Comparaison

Comparaison détaillée côte à côte de ATMEGA329PV-10MNR par Microchip Technology et ATMEGA329P-20AU par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Microchip Technology
ATMEGA329PV-10MNR ATMEGA329PV-10MNR - 8-bit AVR MCU, 32KB Flash, 10MHz | Microchip

ATMEGA329PV-10MNR - 8-bit AVR MCU, 32KB Flash, 10MHz | Microchip

ATMEGA329PV-10MNR ✓ Actif
Microchip Technology
ATMEGA329P-20AU ATMEGA329P-20AU - 20MHz 8-bit AVR MCU 32KB Flash TQFP-64

ATMEGA329P-20AU - 20MHz 8-bit AVR MCU 32KB Flash TQFP-64

ATMEGA329P-20AU ✓ Actif

Comparaison des spécifications

Paramètre ATMEGA329PV-10MNR ATMEGA329P-20AU
Marque Microchip Technology Microchip Technology
Catégorie Microcontrollers Microcontrollers
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $3,16 $4,71
Core Architecture AVR 8-bit RISC AVR (8-bit RISC, Harvard)
Program Memory (Flash) 32 KB 32 KB (16K x 16), In-System Programmable with RWW
SRAM 2 KB 2 KB (2K x 8)
EEPROM 1 KB 1 KB
Maximum CPU Speed 10 MHz —
Supply Voltage (Vcc) 1.8 V to 5.5 V 2.7 V to 5.5 V (10 MHz max below 4.5 V; 20 MHz requires 4.5-5.5 V)
Température de fonctionnement -40C to +105C -40C to +85C (industrial, -A suffix)
Boîtier 64-VFQFN (QFN) Exposed Pad 64-pin TQFP (14x14 mm, 0.8 mm pitch)
Number of I/O Pins 54 (approximate, from 64-pin QFN) —
ADC 10-bit, up to 8 channels 10-bit, up to 8 single-ended channels
DAC 10-bit, 1 channel —
LCD Controller Up to 4×25 segments —
Timers 1 × 16-bit + 2 × 8-bit —
Communication Interfaces 1× USART, 1× SPI, 1× TWI (I²C) —
Power-Saving Modes 6 software-selectable modes —
Instruction Set 131 instructions, most single-cycle 131 instructions, mostly single-cycle
Type de montage Surface Mount Surface Mount
Statut RoHS Compliant Compliant (Pb-free / Green)
Maximum Clock Speed — 20 MHz
Throughput — Up to 20 MIPS at 20 MHz
General-Purpose I/O Pins — 54
General-Purpose Working Registers — 32
PWM Channels — 6
Communication Peripherals — 2x USART, 1x TWI (I2C), 1x SPI (also ISP)
Debug Interface — JTAG (IEEE 1149.1 compliant)
Power-Save Modes — Idle, ADC Noise Reduction, Power-save, Power-down, Standby, Extended Standby (picoPower)
QTouch Support — Yes (peripheral touch controller via library)

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis